Professional Documents
Culture Documents
JUN
29
a) laminated
b)resonance
c)single instrument transformer
d)ferrite circuit transformer
A. difference amplifier
B. comparator
C. single ended
D. voltage follower
a) Differential relay
b) Distance relay
c) Both a&b
6.the ac line current at slipping in a 6 phase, 6 ring rotary converter having 100%
efficiency and unity power factor is........... times the dc current
(A) 0.236
(B) 1.414
(C)0.472
(D) 0.943.
a.load
b.angular speed
c.armature loss
d.core loss
25
4. In case line to line fault occurs, the short circuit current of
an alternator will .depend on its
(A) bars
(B) rods
(C) tubes
(D) any of the above.
(A) termites
(B) borer
(C) corrosion
(D) all of the above.
19
(A) Voltage
(B) Capacitance
(C) Line inductance
(D) All of the above.
(A) 10 MVA
(B) 8 MVA
(C) 5 MVA
(D) 1.34 MVA.
(B) 5K cos2φ
(C) K/ 5 cos2φ
(D) 5K/ 8 cos2φ
(A) 0.1%
(B) 1%
(C) 10%
(D) 50%.
13. 750 kV is termed as
(A) Resistance
(B) Inductance
(C) Capacitance
(D) None of the above.
3.
JUN
17
(A) 2
(B) 20
(C) 50
(D) 100
(A) Isolators
(B) Circuit breakers
(C) Load break switches
(D) Circuit breakers and load break switches.
17
a) Force
b) Torque
c) Momentum
d) Acceleration
2. Noise in resistance depends on
a) Temperature
b) Sampling rate
c) Material
3. In parallel resonance, at resonance
a) Impedance is zero
b) Voltage is maximum
c) Current is maximum
d) Impedance is minimum
4. Admittance
a) Is a measure of how
easily a circuit or device will allow a current to flow
b) Is a type of resistance
c) Both
d) None
8. Effect determines sign of charge
a) Thomson
b) See back
c) Hall
d) Petlier
9. Time constant of inductor
a) L/R
b) C/R
c) R/L
d) All
10. Amperes law is concerned with
a) a unit magnetic pole
b) electrochemical equivalent
c) the force on wire carrying current in a magnetic field
d) rms value
11. Resistance,
Capacitance and inductance are elements
a) Passive
b) Active
c) Both
d) None
15
(A) copper
(B) aluminium
(C) steel
(D) tungsten.
(A) distributors
(B) consumer location
(C) concentrated load
(D) generating stations.
(A) Isolator
(B) Circuit breaker
(C) Current transformer
(D) Inductance.
(A) A
(B) B
(C) C
(D) A and D.
12. C represents
14
(A) 1 H
(B) 0.1 H
(C) 1 mH
(D) 0.1 mH.
5. For 11 kV. line the capacitance per km per phase will be of
the order of
(A) 1 Farad
(B) 0.1 Farad
(C) 0.01 Farad
(D) 0.01 microF.
6. If 3000 kW power is to be transmitted over a distance of 30
km, the desirable transmission voltage will be
(A) 11 kV
(B) 33 kV
(C) 66 kV
(D) 132 kV.
(A) ± 0.1%
(B) ± 1%
(C)±10%
(D)± 25%.
12. In the above case if the span is doubled, the sag will be
(A) 2m
(B) 4m
(C) 8m
(D) 1 m.
(A) 1
(B) Zero
(C) 0.5
(D) - 1.
13
(A) 0.50
(B) 0.75
(C) 1.50
(D) 2.0.
(A) ZR=ZO
(B) Z/R > ZO
(C) ZR < ZO
(D) ZR =Z0 = 0.
(A) 1
(B) 0.5
(C) -1
(D) Zero.
(A) 8 feet
(B) 12 feet
(C) 13 feet
(D) 16 feet.
13
(A) (L+C)1/2
(B) (C/L)1/2
(C) (1/LC)1/2
(D) (L/C)1/2
(A) 2%
(B) 30%
(C)70%
(D) 98%.
3. The characteristic impedance of a transmission line
depends upon
(A) 33 kV - 66 kV
(B) 66 kV - 100 kV
(C) 110 kV - 150 kV
(D) 150kV - 220kV.
7. A relay used on long transmission lines is
(A) 60%
(B) 90%
(C) 95%
(D) 99%.
(A) loge (D/r)
(B) loge (r/D)
(C) 1/loge (D/r)
(D) 1/loge (r/D).
JUN
13
(A) 440 V
(B)11 kV
(C) 22 kV
(D) 66 kV.
(A) 2k
(B) k cosφ
(C) k/ cos2φ
(D) 2k/ cos2p
(A) 10 meter
(B) 20 meters
(C) 60 meters
(D) 200 meters.
(A) I type
(B) J type
(C) H type
(D) L type.
8. For improving life, steel poles are galvanized. Galvanizing is
the process of applying a layer of
(A) paint
(B) varnish
(C) tar coal
(D) zinc.
(A) 50 ohms
(B) 100 ohms
(C) 250 ohms
(D) 500 ohms.
13
(A)100kV
(B) 66 kV
(C) 33 kV
(D) 25 kV.
(A) 3
(B) 5
(C) 8
(D) 12.
(A) 11 kV
(B) 33 kV
(C) 66 kV
(D) 132 kV.
8. The effect of corona is
(A) sinusoidal
(B) square
(C) non-sinusoidal
(A) catenary
(B) triangle
(C) ellipse
(D) semi-circle.
13
(A) 6.6 kV
(B) 9.9 kV
(C) 11kV
(D) 13.2 kV.
(A) inductors
(B) capacitors
(C) transformers
(D) synchronous motors.
(A) 200 km
(B) 160 km
(C) 100 km
(D) 80 km.
JUN
13
a) frequency
b) amplitude
c) phase
d) signal
2. Optical power associated with the optical fibre receiver depends on:
a) quantum
b) dark current
c) thermal
d) all
a) 18
b) 16
c) 32
d d) 64
a) Armstrong
b) Hartley
c) Clapp
d) Colpitts
a)Vector
b) Scalar
c) both
d) none
6. In a line ground fault system, fault current is 1500 Amp, what would be
zero sequence current?
a) 0 A
b) 500 A
c) 800 A
d) 1500 A
a) 550 kv
b) 650 kv
c) 750 kv
d) 500 kv
a) Linear
b) Non Linear
c) Time Variant
d)Time invariant
e) ALL
a) turbine blade
b) speed of rotation
c) both
d) none
JUN
13
(a) CV2
(b) C2V
(c) CV2
(d) CV
(a) 1
(b) 10
(c) 100
(d) 1000
(a) scalar
(b) vector
(c) both (a) and (6)
(d) none of the above
(a) 2 joules
(b) 4 joules
(c) 6 joules
(d) 8 joules
(a) kW
(b) kVA
(c) kVAR
(d) volts
(a) short-circuited
(b) open circuited
(c) alright
(d) leaky
(a) 800 uC
(b) 900 uC
(c) 1200 uC
(d) 1600 uC
(a) 50 pF
(b) 100 pF
(c) 150 pF
(d) 200 pF
(a) Ceramics
(b) Oil
(c) Glass
(d) Paper
14. Which of the following capacitors will have the least value
of breakdown voltage ?
(a) Mica
(b) Paper
(c) Ceramic
(d) Electrolytic
(a) 20 to 60 volts
(b) 200 to 1600 volts
(c) 2000 to 3000 volts
(d) more than 10000 volts
(a) 200
(b) 100
(c) 3 to 8
(d) 1 to 2
JUN
12
Basic Electromagnetic Theory electrical
Engineering NTS Based Short Multiple Choice
Questions with answers
1.which of the following is incorrect?
(a) small
(b) very small
(c) large
(d) zero
(a) zero
(6) proportional to applied voltage
(c) proportional to value of capacitance
(d) both (b) and (c) above
6. In a capacitive circuit
9. A capacitor consists of
(a) two insulators separated by a con¬ductor
(b) two conductors separated by an in¬sulator
(c) two insulators only
(d) two conductors only
(a) tubes
(b) rolled foil
(c) disc
(d) meshed plates
(a) 10 to 400 pF
(b) 1 to 20 pF
(c) 100 to 900 pF
(d) 20 to 100 pF
(a) henry
(b) ohm
(c) farad
(d) farad/m
12
3. Two plates of a parallel plate capacitor after being charged from a constant
voltage source are separated apart by means of insulated handles, then the
(a) 50
(b) 100
(c) 150
(d) 200
(a) Air capacitors have a black band to indicate the outside foil
(b) Electrolytic capacitor must be connected in the correct polarity
(c) Ceramic capacitors must be connected in the correct polarity
(d) Mica capacitors are available in capacitance value of 1 to 10 pF
(a) 0.0002
(b) 0.002
(c) 0.02
(d) 0.2
8. "The total electric flux through any closed surface surrounding charges is
equal to the amount of charge enclosed".The above statement is associated
with
10. For which of the following parameter variation, the capacitance of the
capacitor remains unaffected?
12. Which of the following expression is correct for electric field strength?
(a) E = D/E
(b) E = D2/t
(c) E = jtD
(d) E= nD2
14. Which of the following materials has the highest value of dielectric
constant?
(a) Glass
(b) Vacuum
(c) Ceramics
(d) Oil
15. Which of the following capacitors will have the least variation?
11
11
Basic Electrical Circuits NTS Based short
Multiple choice Questions
1. Which of the following wires has the greatest cross-sectional area?
a. 9 AWG
b. 14 AWG
c. 22 AWG
d. 30 AWG
2. What is the unit of measure for electrical pressure or electromotive force?
a. amps
b. ohms
c. volts
d. watts
3. Which of the following circuit configurations has the same amount of voltage
drop across each of its components?
a. parallel
b. series-parallel
c. series
d. combination
5. In a series circuit consisting of 3 resistors of 45Ω each and a 50V source, what
is the approximate amount of heat produced?
a. 16.6 W
b. 18.5 W
c. 135 W
d. 150 W
6. In a two-branch parallel circuit containing one 30- Ω resistor in each branch
and powered from a 10-V source,what is the total current flowing in the circuit?
a. .33 A
b. .67 A
c. 40 A
d. 60 A
10. Refer to Figure on the Reference Sheet. Which drawing is the electrical
symbol for a source of energy?
a. A
b. C
c. I
d. J
11. What is the classification of an AC circ uit in which the capacitive reactance is
50Ω, the inductive reactance is 30Ω and the resistance is 100 Ω?
a. resistive
b. inductive
c. capacitive
d. resonant
12. When using a standard multimeter to measure AC voltage, what type of
measurement will the multimeter indicate?
a. peak-to-peak
b. peak
c. average
d. rms
13. What happens to current flow in a capacitive circui t when the DC voltage
across the capacitor is approximately
equal to the source voltage?
a. Current flow is optimized.
b. Little current flows.
c. Current flow is maximum at the source.
d. Current flow is maximum at the capacitor.
14. What is the term used to describe the ability of a device to store energy in the
form of an electrical charge?
a. inductance
b. conductance
c. reactance
d. capacitance
a. 15 pF
b. 30 pF
c. 105 pF
d. 160 pF
16. If the distance between the plates of a capacitor decreases while all other
components of the capacitor remain the same, what happens to the capacitance of
the device?
a. increases
b. remains the same
c. decreases
d. varies
18. The Henry is the unit of measurement for which of the following properties?
a. reactance
b. capacitance
c. resistance
d. induction
19. Which of the following devices can be used to test the windings of an inductor
for continuity?
a. wattmeter
b. voltmeter
c. ohmmeter
d. Wheatstone bridge
20. Which of the following circuit conditions does a metal oxide varistor (MOV)
protect against?
a. high voltage
b. high current
c. high circuit noise
d. high cross-talk
11
4. 600000 mV
JUN
d. Over load
JUN