Professional Documents
Culture Documents
Anemometer Instruction Manual: MODEL GM816
Anemometer Instruction Manual: MODEL GM816
C. Operation B. Temperature
1.Turn on:Press "MODE" button for 2 seconds to turn on Unit Range Resolution Accuracy
the unit. LCD will display Air velocity, temperature and
℃ -10℃~+45℃ 0.2 ±2℃
battery icon. LCD backlight will last for 12 seconds.
2. Set unit of air velocity and measuring mode: °
F 14°
F~113°
F 0.36 ±3.6°
F
Press "MODE" button more than 3 seconds until "m/s" Battery CR2032 3.0V (Included)
starts to blink. Press "SET" button to select desired Thermometer NTC thermometer
GM816
air velocity unit. To confirm the unit, press "MODE" Operating temperature -10℃~+45℃(1 4°
F~113°
F)
button. For setting MAX/AVG/CU mode, press "SET"
Operating humidity Less than 90%RH
button again and again until CU/MAX/AVG blink, then
Store temperature -40℃~+60℃(-40°
F~140°
F)
press "MODE" button to confirm.
1). The setting will be stored when turn off the unit. But Current consumption Approx. 3mA
if you change the battery, the setting will go back to the Weight 52g
factory preset.
Dimension 40x18x105mm
2). Unit of Air velocity: m/s, Km/hr, ft/min, Knots, mph
3). Measuring mode: CU: current air velocity
MAX: max air velocity AVG: average air velocity
MADE IN CHINA