This document contains calculations to design the top and bottom bars of a steel beam. For the top bar, a moment of 0 KNm requires 0 mm2 of steel. For the bottom bar, a moment of 150 KNm requires 671.5353 mm2 of steel, which can be provided using 4 bars with a diameter of 16 mm each. Transverse steel is also designed in the flange.
This document contains calculations to design the top and bottom bars of a steel beam. For the top bar, a moment of 0 KNm requires 0 mm2 of steel. For the bottom bar, a moment of 150 KNm requires 671.5353 mm2 of steel, which can be provided using 4 bars with a diameter of 16 mm each. Transverse steel is also designed in the flange.
This document contains calculations to design the top and bottom bars of a steel beam. For the top bar, a moment of 0 KNm requires 0 mm2 of steel. For the bottom bar, a moment of 150 KNm requires 671.5353 mm2 of steel, which can be provided using 4 bars with a diameter of 16 mm each. Transverse steel is also designed in the flange.
Fcu = 25 N/mm2 Fcu = 25 N/mm2 100As/Ww*d = 0.54 OK Fy = 500 N/mm2 Fy = 500 N/mm2 Transverse Steel in Flange, Width of Flange (Wf)= 1500 mm Width of Flange (Wf)= 1500 mm 1.5*Df = 225 mm2/m Depth of Flange (Df)= 150 mm Depth of Flange (Df)= 150 mm Provide, Width of Web(Ww)= 300 mm Width of Web(Ww)= 300 mm Spacing = 150 mm c/c Depth of Web (Hw)= 400 mm Depth of Web (Hw)= 400 mm No. of Bars= 6.67 7 Clear Cover = 50 mm Clear Cover = 50 mm Dia of Bars = 8 mm Effective depth(d)= 495 mm Effective depth(d)= 495 mm Min.Ast = .13% *Wf*Df 292.5 mm2
Moment = 0 KNm (From Staad) Moment = 150 KNm (From Staad) Ast Provided = 351.8581 ok
M/Wf*d^2*Fcu = 0 M/Wf*d^2*Fcu = 0.016325
From Figure 7.5 of WH Mosley, From Figure 7.5 of WH Mosley, La= 0.95 page 148 La= 0.95 page 148 Z= 470.25 mm Z= 470.25 mm d-Z = 24.75 OK d-Z = 24.75 OK As req.= 0 mm2 As req.= 671.5353 mm2 Provide, Provide, No. of bars = 2 No. of bars = 4 Dia. of Bar = 12 mm Dia. of Bar = 16 mm Ast Provided = 226.1945 OK Ast Provided = 804.247 OK