Professional Documents
Culture Documents
160
BUILDING COMPONENTS
THE
& SPECIALS
RANGE
special shapes
At Ibstock we view Special Shaped Bricks as the unique
design elements to knit brickwork together. They
provide architects and designers with the freedom to
create distinctive buildings, providing limitless design
solutions in clay masonry.
Ibstock-Kevington is the UKs largest brickwork special shape fabrication
company offering nationwide coverage of special shaped bricks and building
components. With modern and efficient factories, Ibstock Kevington,
supported by an experienced technical and design team, is able to supply
products quickly and cost effectively.
161
Chimneys Lightweight and easy-to-install
Faststack chimneys for both fully
functional and decorative purposes.
IBSTOCK
EXPLORE
Arches | Pre-fabricated brick and stone arches to suit most construction methods.
162 Cutting
masonry as well as other natural & Pre-cast Bespoke high strength concrete-backed brick and stone
synthetic materials, alloys & metals. components and facades.
Special Shapes Both manufactured and cut & bonded BS Special shapes
service enabling easier and quicker creative brickwork design.
Underslung soffits Pre-cast masonry units to create deep reveals and soffits to masonry facades.
special shapes
Brickwork Time-saving and cost-effective brickwork
details to use with conventional masonry.
Components
166-169 Angle & AN • Bricks to turn brickwork through angles 186-189 Plinth Bricks PL • S played bricks that create changes in
Cant Bricks on plan. depth to brickwork elevations.
• Vertical
and horizontal chamfers to
brickwork for doors and window openings.
172-177 Bullnose BN •V
ertical and horizontal curves to
Bricks brickwork for doors & windows.
• Subtle curves to projecting brickwork. 193 Soldier SD •R eturns for soldier courses
Bricks in brickwork.
• Curved capping details to walls.
184-185 Sill Bricks I.C • Ibstock shapes designed for durable 195 Universal UJ • Decorative specials used to turn
brick sills to openings. Joint Bricks brickwork through any angle on plan.
(including
Easyangle®)
At the core of the Caplock® system is a simple idea: The resulting capping or coping course forms a virtually Throughout this brochure products that can be used with
immovable mass and remains locked in place even in the the Caplock® system will be clearly identified especially in the
A specially designed two metre PVC-u extrusion is held in
event of mortar problems. Cappings and Copings section.
place on each side by a course of bricks, leaving the upper
flanges proud of the wall. The benefits of the Caplock® system are: These specials will be identified with the following symbol:
After a bed of mortar is laid, special Caplock capping or
® • Improved strength of wall. This denotes that the special is available with or without the
coping bricks, incorporating an integral keyway, can then be special keyway design for Caplock®.
• Resistance to vandal damage.
locked into place by simply bedding the unit onto the PVC-u
• Increased life expectancy of the wall.
extrusion and mortar bed.
When ordering Caplock® specials please identify your
• Cost-effective.
Its flanges firmly lock into position in the keyway, ensuring requirements by adding -C to the end of the specials
both alignment and positive location. • Large choice of capping and coping profiles. code e.g. for a Double Cant Type AN6.1 quote code AN6.1-C.
• Can be used for many wall designs.
165
B
This section shows special shaped bricks that turn brickwork through angles; and cant bricks that create
α A
chamfered vertical and horizontal features. These British Standard capping bricks along with Ibstock’s own L.H. SHOWN
D
special shapes fulfil most applications and many are available in the Caplock® format.
C
a
A
L.H. SHOWN B
D A MIRROR
Type No. A B C D a
AN.3.1+ 164 102 65 51 30° E
D
AN.3.2+ 164 102 65 51 45° L.H. SHOWN
AN.3.3+ 164 102 65 51 60°
AN.3.4 159 102 65 102 30°
Apartments, Streetly, West Midlands AN.3.5 159 102 65 102 45°
AN.5 Single Cant (Left & Right Hand)
Ravenhead Smooth Red & Chester Red Blend - AN.2.5 External Angle AN.3.6 159 102 65 102 60°
AN.3.7+ 215 102 65 102 30° Type No. A B C D E
AN.3.8+ 215 102 65 102 45° AN.5.1 215 102 65 46 159
AN.3.9+ 215 102 65 102 60° AN.5.2 215 102 65 60 173
B
90º
B
A
E
A
a C MIRROR
D L.H. SHOWN
D E
AN.1 Squint Brick (Left & Right Hand) AN.6 Double Cant
Type No. A B C D E a
Type No. A B C D E a AN.1.2+ 164 102 65 51 94 45°
Type No. A B C D E
Type No. A B C D E
AN.1.1+ 164 102 65 51 89 30° AN.1.3+ 164 102 65 51 117 60° AN.6.1 215 102 65 46 103 AN.6.2 215 102 65 60 131
166
+ suitable for half bond without cutting (any angle available) suitable for quarter bond without cutting (any angle available) available in Caplock®
AN.11.1 AN.3.1
AN.8.1
AN.5.1
AN.7.1
E E
MIRROR
C
D
B A
45 45
D
E
B D
E F A
F D C
MIRROR a
F A
F C
MIRROR
B
C
a AN.11 Single Cant Internal Angle
C
Type No. A B C D E F a
AN.11.1 215 102 159 46 159 101 30°
AN.10 Single Cant External Angle AN.11.2 215 102 159 60 173 101 30°
Type No. A B C D E F a Type No. A B C D E F a AN.11.3 215 102 159 46 159 70 45°
AN.10.1 215 102 159 46 159 101 30° AN.10.4 215 102 159 60 173 70 45° AN.11.4 215 102 159 60 173 70 45°
AN.10.2 215 102 159 60 173 101 30° AN.10.5 215 102 159 46 159 35 60° AN.11.5 215 102 159 46 159 35 60°
Church Hall, Wivelsfield, East Sussex
AN.10.3 215 102 159 46 159 70 45° AN.10.6 215 102 159 60 173 35 60° AN.11.6 215 102 159 60 173 35 60° Parham Red Stock - AN.5.2 Single Cant
167
+ suitable for half bond without cutting (any angle available) suitable for quarter bond without cutting (any angle available) available in Caplock®
Angle & Cant Bricks
F E
C
D
B A
MIRROR
Type No. A B C D E F
AN.12.1 215 215 102 46 103 159
AN.12.2 215 215 102 60 131 173
Boundary Wall, Stourbridge, West Midlands | Atlas Smooth Red & Himley Mixed Russet Original - AN.12.1 Double Cant Stop End
F E For suitability of coping and capping details, please refer to the BDA guide “Severely Exposed Brickwork”
D
C E E 45 45
E E E E
B 45 45 A MIRROR
C C C
D 45º 45º D D 45º 45º
F F 45º 45º
F F
AN.13 Double Cant Stop End 45 45 MIRROR A B MIRROR A 45 45 MIRROR
A B B
(Canted Corners On Bed)
Type No. A B C D E F
AN.13.1 215 215 102 46 103 159
AN.13.2 215 215 102 60 131 173
E E
C
D
A B
MIRROR
AN.14 Double Cant External Return With AN.15 Double Cant External Return With AN.16 Double Cant External Return With AN.17 Double Cant External Return With
Internal Mitre (Square Corner On Bed) Internal Mitre (Canted Corner On Bed) Internal Slope (Square Corner On Bed) Internal Slope (Canted Corner On Bed)
Type No. A B C D E Type No. A B C D E F Type No. A B C D E Type No. A B C D E F
AN.14.1 215 215 102 46 103 AN.15.1 215 215 102 46 103 159 AN.16.1 215 215 102 46 103 AN.17.1 215 215 102 46 103 159
AN.14.2 215 215 102 60 131 AN.15.2 215 215 102 60 131 173 AN.16.2 215 215 102 60 131 AN.17.2 215 215 102 60 131 173
168
available in Caplock®
AN.6.1-C
E AN.12.1-C
D I.AN.19.1-C
C B I.AN.20.1-C
F A
a F
C MIRROR
AN.14.1-C
I.AN.21.1-C
I.AN.22.1-C
E E
C
C
E E B
E
a D
F B a
MIRROR
MIRROR
C C C
D D A
A C D
A B B A
I.AN.19 Three-way Transition Unit For I.AN.20 Double Cant Capping † I.AN.21 Double Cant Incline to Horizontal I.AN.22 Double Cant Horizontal to Incline
Double Cant Profile ** Transition Unit Transition Unit
Type No. A B C D E F Type No. A B C D E Type No. A B C D E a Type No. A B C D E a
I.AN.19.1 215 215 102 46 103 215 I.AN.20.1 215 215 102 46 103 I.AN.21.1 215 102 65 46 103 ∆ I.AN.22.1 215 102 65 46 103 ∆
I.AN.19.2 215 215 102 60 131 215 I.AN.20.2 215 215 102 60 131 I.AN.21.2 215 102 65 60 131 ∆ I.AN.22.2 215 102 65 60 131 ∆
169
** An Ibstock special to solve the problem of 3 way brick junctions. Available with or without false joints. † An Ibstock alternative to AN.6 format, for improved visual choice. ∆ Angle to be specified. available in Caplock®
AR.1 Tapered Header
Arch Bricks
Type No. A
Unit dimensions
B C D
Ideal span
dimensions
No. of whole
bricks (span)
No. of bricks
in semi-circle
AR.1.1 215 102 75 59 910 4 20 or 21
Arches have become a popular decorative and practical feature of new construction for both commercial I.AR.1.1-1* 215 102 75 62 1135 5 24 or 25
and housing developments. They can be used to complement new brickwork or to match in with existing AR.1.2 215 102 75 64 1360 6 28 or 29
I.AR.1.2-1* 215 102 75 65 1585 7 32 or 33
brickwork in refurbishment and renovation schemes.
AR.1.3 215 102 75 66 1810 8 36 or 37
I.AR.1.3-1* 215 102 75 67 2260 10 45 or 46
Our standard range of span dimensions gives a The arches illustrated here are a small selection
AR.1.4 215 102 75 69 2710 12 53 or 54
greater choice than the British Standard. Canted of those available. Different types of arches to an
and Bullnose profiles are available as standard. architect’s own design can easily be manufactured.
AR.2 Tapered Stretcher
Expert advice and the provision of CAD drawings AR.2.1 215 102 75 48 910 4 25
I.AR.2.1-1* 215 102 75 51 1135 5 29
are available through our Design Advisors.
AR.2.2 215 102 75 55 1360 6 33
I.AR.2.2-1* 215 102 75 57 1585 7 37
AR.2.3 215 102 75 58 1810 8 41
special shapes | arch bricks
A MIRROR A MIRROR
B B
AR.1
AR.2
AR.2
For type of Tapered Stretcher please refer to tables above.
170
Please note that special shaped bricks may be solid, perforated or frogged. In all illustrations, the intended brick face/s are shown in darker shading.
Surfaces not visible in diagrams will not be faced. Light shaded faces may contain voids or factory identification marks.
When specifying you should ascertain the orientation of any voids present.
Bonding Bricks
Bonding bricks, often forgotten, are one of the
key pieces in the jigsaw to make brickwork bond.
A range of specials with extra faces and the king
closer, a popular sill detail, are also available.
A E C
B
A A
171
*Suitable as a flush sill. available in Caplock®
B
A
B R
A
Bullnose Bricks
R
C
R
C
This section illustrates the complete range of bullnose bricks including Ibstock’s own specials for D
D L.H. SHOWN
improved visual choice and durability. Many of this group can be supplied in Caplock® format and
are identified with the Caplock® symbol. MIRROR
A
BN.3 Single Bullnose Stop (Left & Right Hand) BN.4 Double Bullnose Stop
A
R
Type No. A B C D R Type No. A B C D R
R R
C C BN.3.1 215 102 65 25 25 BN.4.1 215 102 65 25 25
BN.1 Single Bullnose (Left & Right Hand) BN.2 Double Bullnose
special shapes | bullnose bricks
R
A
B BN.6 Single Bullnose Stretcher On Flat
Type No. A B C R
BN.5 Single Bullnose Header On Flat BN.6.1 215 102 65 25
Type No. A B C R BN.6.2 215 102 65 51
BN.5.1 215 102 65 25
BN.5.2 215 102 65 51
C
C C
R
R
R
R R R
A A A
B B
R.H. SHOWN B
L.H. SHOWN
BN.8 Single Bullnose Internal Return Header BN.7 Single Bullnose Internal Return Stretcher
Faced (Left & Right Hand) Faced (Left & Right Hand)
BN.9 Single Bullnose Internal Return Flat Faced
Type No. A B C R Type No. A B C R
(Left & Right Hand)
BN.8.1 215 102 65 25 BN.7.1 215 102 65 25
BN.8.2 215 102 65 51 Type No. A B C R BN.7.2 215 102 65 51
Supermarket, Droitwich, Worcestershire BN.9.1 215 102 65 25
BN.8.3 215 102 102 25
BN.7.3 215 102 215 25
Staffordshire Slate Blue Smooth & Birtley Olde English
BN.1.2 Single Bullnose
BN.8.4 215 102 102 51 BN.9.2 215 102 65 51
BN.7.4 215 102 215 51
172
Please note that special shaped bricks may be solid, perforated or frogged. In all illustrations, the intended brick face/s are shown in darker shading. Surfaces not visible in diagrams will not be faced.
Light shaded faces may contain voids or factory identification marks. When specifying you should ascertain the orientation of any voids present.
C R C
R R
A A R
MIRROR B
B L.H. SHOWN L.H. SHOWN MIRROR
R R
C C R R
B A B A
MIRROR MIRROR
BN.10 Bullnose External Return On Edge (Left & Right Hand) BN.11 Bullnose External Return On Flat (Left & Right Hand)
Type No. A B C R Type No. A B C R Type No. A B C R Type No. A B C R
BN.10.1 215 65 102 25
BN.10.3 215 215 102 25 BN.11.1 215 102 65 25 BN.11.3 215 215 65 25
BN.10.2 215 65 102 51
BN.10.4 215 215 102 51 BN.11.2 215 102 65 51 BN.11.4 215 215 65 51
R R R
A A
B L.H. SHOWN B
BN.12 Bullnose Mitre (Left & Right Hand) BN.13 Bullnose Double Header On Flat
BN.3.2
BN.5.1 BN.2.2
BN.1.2
BN.12.1
BN.4.2
173
available in Caplock®
C C
Bullnose Bricks R
R
A
R
A
B B
MIRROR
MIRROR
BN.14.1 Bullnose Double Stretcher On Flat BN.14.2 Bullnose Double Stretcher On Flat
Type No. A B C R Type No. A B C R
BN.14.1 215 102 65 25 BN.14.2 215 102 65 51
special shapes | bullnose bricks
C C
R
R
A B
A
MIRROR
R BN.16.1 Cownose
R Type No. A B C R
BN.16.1 215 102 65 25
MIRROR
BN.15.4 215 215 102 51
BN.15.5 215 159 65 25
BN.15.6 215 159 65 51 BN.16.2 Cownose
Boundary Wall, Sherfield-on-Loddon, Hampshire
BN.15.7 215 215 65 25 Type No. A B C R
Cheddar Red & Bexhill Red - BN.15.4 Stop End to Double Bullnose On Edge and to Bullnose Double Header On Flat
BN.15.8 215 215 65 51 BN.16.2 215 102 65 51
For suitability of coping and capping details, please refer to the BDA guide “Severely Exposed Brickwork”
174
available in Caplock®
Please note that special shaped bricks may be solid, perforated or frogged. In all illustrations, the intended brick face/s are shown in darker shading.
Surfaces not visible in diagrams will not be faced. Light shaded faces may contain voids or factory identification marks. When specifying you should ascertain the orientation of any voids present.
BN.19.2 C
R
B
A R
R
R
A
MIRROR
BN.18.4 BN.15.4
Type No. A B C R
A B
R R
R R
MIRROR
B
B
C
D R C
R D R BN.19 External Return to Double Bullnose
On Edge and to Bullnose Double Header
A MIRROR A MIRROR On Flat (Square Corner On Bed)
Type No. A B C R
BN.19.1 215 215 102 25
BN.17.1 Cownose Stop BN.17.2 Cownose Stop
BN.19.2 215 215 102 51
Type No. A B C D R Type No. A B C D R BN.19.3 215 215 65 25
BN.17.1 215 102 65 25 25 BN.17.2 215 102 65 25 51 BN.19.4 215 215 65 51
175
available in Caplock®
BN.21 Double Bullnose External Angle to
Double Bullnose On Edge and to Bullnose
C R Double Header On Flat
Bullnose Bricks
R
R R
A B Type No. A B C D R a
B
R MIRROR
BN.21.1 215 102 159 101 25 30°
C C
BN.21.2 215 102 159 101 51 30°
BN.21.3 215 65 159 101 25 30°
BN.21.4 215 65 159 101 51 30°
BN.20 External Return to Double Bullnose On Edge BN.21.5 215 102 159 70 25 45°
a
& to Bullnose Double Header On Flat (Rounded BN.21.6 215 102 159 70 51 45°
Corner On Bed) BN.21.7 215 65 159 70 25 45°
R R
Type No. A B C R BN.21.8 215 65 159 70 51 45° R R
BN.20.1 215 215 102 25 BN.21.9 215 102 159 35 25 60°
A A
BN.20.2 215 215 102 51 BN.21.10 215 102 159 35 51 60°
MIRROR D D
BN.20.3 215 215 65 25 BN.21.11 215 65 159 35 25 60°
BN.20.4 215 215 65 51 BN.21.12 215 65 159 35 51 60°
special shapes | bullnose bricks
Boundary Wall, Sherfield-on-Loddon, Hampshire | Cheddar Red & Bexhill Red - BN.21.2 Double Bullnose External Angle to Double Bullnose On Edge and to Bullnose Double Header On Flat
For suitability of coping and capping details, please refer to the BDA guide “Severely Exposed Brickwork”
176
available in Caplock®
Please note that special shaped bricks may be solid, perforated or frogged. In all illustrations, the intended brick face/s are shown in darker shading. Surfaces not visible in diagrams will not be faced. Light shaded faces may contain voids or factory identification marks.
When specifying you should ascertain the orientation of any voids present.
I.BN.25.2
R
C
R
A B
I.BN.22.2
R R
R R
BN.21.6
MIRROR
Type No. A B C R
I.BN.22.1 215 215 102 25
I.BN.22.2 215 215 102 51
I.BN.22.3 215 215 65 25
I.BN.22.4 215 215 65 51
R
B
R
C A
MIRROR
Type No. A B C D
I.BN.25.1 215 102 215 25
I.BN.25.2 215 102 215 51
177
*An Ibstock special to solve the problem of 3 way brick junction. † An Ibstock alternative to BN.2 format for improved visual choice. available in Caplock®
I.CP.5.2
I.CP.6.2
B B
D2
D1
D1
special shapes | cappings & copings
A MIRROR
C A
D2 MIRROR
C
I.CP.5.1
CP.1.1 I.CP.20.1
B
B
D2
D1
A
D1 A
D2
I.CP.6.1
MIRROR
MIRROR
I.CP.5.1 Half Round Coping 90° Return I.CP.5.2 Half Round Capping 90° Return*
178
*Angles are available. available in Caplock®
Caplock® is available as standard on the
following colours/textures:
Colour/Type Product
Red Smooth Cheddar Red
Ravenhead Red Smooth
Holbrook Smooth Red
Red Dragfaced Bristol Red
Ravenhead Red Rustic
Blue Smooth Staffordshire Slate Blue Smooth
Blue Dragfaced Staffordshire Blue Brindle Dragfaced
Buff Smooth Cheddar Golden
Smooth Buff
Buff Dragfaced Bristol Gold
Red Sanded Stock Parham Red Stock
Leicester Red Stock
B B
B
D2
A B D1
C A C
A
D1 C
A C D2
D2
D1
MIRROR
MIRROR MIRROR
D1
D2
MIRROR
179
B B
E
E
D2
D1
A C A
D2
C
MIRROR MIRROR
F F
special shapes | cappings & copings
E
B
E B
A
C A
C
D2
D1
D1
D2
MIRROR
MIRROR
I.CP.7.1 Saddleback Coping Stop End I.CP.7.2 Saddleback Capping Stop End
I.CP.9.1
CP.2.1
I.CP.21.1
I.CP.7.1
Walling, Social Housing, Greenford, Greater London | Ravenhead Red Smooth - CP.2.2 Saddleback Capping
For suitability of coping and capping details, please refer to the BDA guide “Severely Exposed Brickwork”
180
available in Caplock®
B
E
D2
D1
D1 A
A D2
MIRROR
A A
MIRROR
I.CP.9.2
B
B
E
E
D2
D1
CP.2.2
I.CP.21.2 A
D1 C A C
D2
I.CP.7.2
MIRROR MIRROR
An Ibstock alternative to the CP2.1 format for An Ibstock alternative to the CP2.2 format for
improved visual choice. improved visual choice.
181
* Angles are available. available in Caplock ®
Please note that special shaped bricks may be solid, perforated or frogged. In all illustrations, the intended brick face/s are shown in darker shading.
Surfaces not visible in diagrams will not be faced. Light shaded faces may contain voids or factory identification marks. When specifying you should ascertain the orientation of any voids present.
102
B
B B C
B
C MIRROR
C C 10
102
10 65
102 10
10 MIRROR
65 65
A 140
65 A 215
A I.F.4 Faceted Capping 90° Return
65
Type No. A B C
I.F.4.1 215 65.5 42
special shapes | cappings & copings
I.F.1 Faceted Capping † I.F.2 Faceted Capping † I.F.3 Faceted Capping Stop End
I.F.4.2 255 77.5 50
Type No. A B C Type No. A B C Type No. A B C
I.F.1.1 215 65.5 42 I.F.2.1 215 65.5 42 I.F.3.1 215 65.5 42
I.F.1.2 255 77.5 50 I.F.2.2 255 77.5 50 I.F.3.2 255 77.5 50 B
C
10
65
a
C A
10
B
a 102 B I.F.7 Faceted Capping Horizontal to
65
Incline Transition Unit
C
Type No. A B C a
A A I.F.7.1 215 65.5 42 ∆
65
102
A
A E B
D
B
D D
B
MIRROR
182
∆ Angle to be specified. †Note: Other widths available **Note: Can be cut to form incline to transition unit. available in Caplock®
Please note that special shaped bricks may be solid, perforated or frogged. In all illustrations, the intended brick face/s are shown in darker shading.
Surfaces not visible in diagrams will not be faced. Light shaded faces may contain voids or factory identification marks. When specifying you should ascertain the orientation of any voids present.
MIRROR Faceted capping bricks featured show
A the Ibstock Caplock® system.
E D
B
B
B
B C
L.H. SHOWN
I.F.4.1-C I.F.2.1-C
I.BC.1
I.F.6.1-C
I.F.7.1-C
E
D
I.F.1.1-C
A
C B L.H. SHOWN
I.F.3.1-C
I.BC.8 Base Coping 90° Internal Return (Left and Right Hand)
Type No. A B C D E
I.BC.8.1 102 45 35 65 215
I.BC.8.2 122 45 35 65 235
A
B
D
B
B
E
L.H. SHOWN C MIRROR
I.BC.9 Base Coping 90° External Return (Left and Right Hand)
Type No. A B C D E
I.BC.9.1 102 45 35 65 228
I.BC.9.2 122 45 35 65 228
183
Sill Bricks
Ibstock’s range of overhanging sills with associated stop ends and returns have been designed
to provide the correct overhang and drip detail to ensure durable brickwork.
35
35 MIRROR MIRROR
C 35
C 102 102
A D
A
a B
a 50
A
65
152 12 B
65 a
15 MIRROR 12 65
152 B
15 12
L.H. SHOWN C
R.H. SHOWN
152 15
I.C.1 Overhanging Angled Sill I.C.2 Faced Angled Sill End (Left & Right Hand)
Type No. A B C a Type No. A B C a I.C.3 Overhanging Angled Sill Stooled End
special shapes | sill bricks
I.C.6.1
I.C.1.1
E
35 I.C.4.1
D
A
a
C 65 12
10 152 15 I.C.2.1
B 152
MIRROR
184
† available without false joints.
Please note that special shaped bricks may be solid, perforated or frogged. In all illustrations, the intended brick face/s are shown in darker shading.
Surfaces not visible in diagrams will not be faced. Light shaded faces may contain voids or factory identification marks. When specifying you should ascertain the orientation of any voids present.
35
65 178 178
152 152
35
A
MIRROR B
A
12
a 152 15 65
26
12
15
35 35
a
º
B B
A
A a
a
65
65 12 152
12 a
º
15 152 15
38 102 140
10
I.C.7 Overhanging Angled Sill Internal Angle (Left and Right Hand) I.C.8 Overhanging Angled Sill External Angle (Left and Right Hand)
Type No. A B a a Type No. A B a a Type No. A B a a Type No. A B a a
I.C.7.1 140 7.5 30° 30° I.C.7.4 215 10.0 50° 30° I.C.8.1 140 7.5 30° 30° I.C.8.4 215 10.0 50° 30°
I.C.7.2 140 7.5 30° 45° I.C.7.5 215 10.0 50° 45° I.C.8.2 140 7.5 30° 45° I.C.8.5 215 10.0 50° 45°
I.C.7.3 140 7.5 30° 60° I.C.7.6 215 10.0 50° 60° I.C.8.3 140 7.5 30° 60° I.C.8.6 215 10.0 50° 60°
185
B
A
C A
Plinth Bricks
B
F
E 45º C
F
45º a
45º
Plinth bricks have been used for many years in both commercial and domestic buildings. Illustrated
D L.H. SHOWN D
along with British Standard Specials are Ibstock’s own substantial range of specials with extra faces
and shapes to aid bonding. Included in this is our own through-the-wall plinth, (I.PL.15.1), which E L.H. SHOWN
removes the requirement for cut bricks to make up the wall thickness (see page 189).
B
A
F E
45º
special shapes | plinth bricks
D L.H. SHOWN
45º
L.H. SHOWN PL.6.13 + 215 102 65 9 102 46 30°
D
PL.6.14 + 215 102 65 23 102 60 30°
PL.6.15 + 215 102 65 9 102 46 45°
PL.4 Plinth Internal Return - long (Left & Right Hand)* PL.6.16 + 215 102 65 23 102 60 45°
Private Housing, Douglas, Isle of Man
Type No. A B C D E F Type No. A B C D E F PL.6.17 + 215 102 65 9 102 46 60°
Cheddar Golden & Cheddar Red - PL.2.1 Plinth Header, I.PL.15.1
PL.4.1 215 102 65 9 46 169 PL.4.2 215 102 65 23 60 155 Wide Bed Plinth Stretcher & PL.8.9 Plinth External Angle PL.6.18 + 215 102 65 23 102 60 60°
186 * extra faces available + suitable for half bond suitable for quarter bond
Please note that special shaped bricks may be solid, perforated or frogged. In all illustrations, the intended brick face/s are shown in darker shading.
Surfaces not visible in diagrams will not be faced. Light shaded faces may contain voids or factory identification marks. When specifying you should ascertain the orientation of any voids present.
I.PL.15.1 wide bed plinth stretcher is
recommended to save time on site –
if the PL.3.1 plinth stretcher is used on
the upper course, a cut brick is required F
behind it to support the brick leaf above. E 45º
B
F
45º C
D
C
B A D
L.H. SHOWN
A
a
B
F
45º C
A
a
L.H. SHOWN
E
187
suitable for quarter bond without cutting + suitable for half bond without cutting * extra faces available
B
E
45º C
Plinth Bricks D
A
R.H.SHOWN
E
45º
special shapes | plinth bricks
C
I.PL.13.1 A
I.PL.9.1
B L.H.SHOWN
I.PL.15.1
I.PL.10 Plinth Stretcher Faced On End (Left & Right Hand)
I.PL.10.1
Type No. A B C D E
I.PL.10.1 215 102 65 9 46
B B
A A
C
C
E E
45º 45º
F F
L.H.SHOWN D L.H.SHOWN
D
I.PL.11 Plinth / Cant Mitre Stretcher (Left & Right Hand) I.PL.12 Plinth / Cant Mitre Header (Left & Right Hand)
188
E E
45º 45º
C
D
E D
45º
C C
45º
B A A
A R.H. SHOWN B
D B L.H. SHOWN
A B A B
F F
C C
E 45º E
45º 45º
L.H. SHOWN L.H. SHOWN
D D
I.C.10 Plinth To Splayed Cant Internal Return (Left & Right Hand) I.C.16 Plinth Internal Return (long) (Left & Right Hand)
Type No. A B C D E F Type No. A B C D E F Type No. A B C D E F Type No. A B C D E F
I.C.10.1 215 102 65 9 46 169 I.C.10.2 215 102 65 23 60 155 I.C.16.1 215 102 65 9 46 169 I.C.16.2 215 102 65 23 60 155
An Ibstock special to aid bonding at stop situations and also as transition to single cant reveal. An Ibstock special alternative to I.C.10 for transition into single cant feature giving a mitred finish.
189
Please note that special shaped bricks may be solid, perforated or frogged. In all illustrations, the intended brick face/s are shown in darker shading.
Surfaces not visible in diagrams will not be faced. Light shaded faces may contain voids or factory identification marks.
When specifying you should ascertain the orientation of any voids present.
Radial Bricks
Ibstock offers radial bricks in a wide range of radii to give more choice and greater potential
for architectural detailing of both buildings and landscaping. Included is the transition brick which
is essential to avoid poor quality junctions when curve changes to straight.
NOTE: To be used in conjunction with I.RD.3, radial to straight transition bricks. NOTE: To be used in conjunction with RD.2 radial bricks.
190
Shelf Angle Bricks 65
102
140 a
Ibstock has a unique range of rebated shelf angle bricks with a wide choice of internal and external angles and returns all to suit our nine standard rebate sizes.
215 A B
65 102
MIRROR
R.H. SHOWN
215
I.SA.3 Rebated Soldier External Angle
B (Left & Right Hand)
A
Type No. A B a
MIRROR
I.SA.3.1 82 15 30°
I.SA.3.2 82 25 30°
I.SA.1 Rebated Soldier I.SA.3.3 82 35 30°
I.SA.3.4 77 15 30°
Type No. A B
I.SA.3.5 77 25 30°
I.SA.1.1 82 15
I.SA.3.6 77 35 30°
I.SA.1.2 82 25
191
Please note that special shaped bricks may be solid, perforated or frogged. In all illustrations, the intended brick face/s are shown in darker shading.
Surfaces not visible in diagrams will not be faced. Light shaded faces may contain voids or factory identification marks.
When specifying you should ascertain the orientation of any voids present.
Slip Bricks
Ibstock has a range of slip bricks generally used for cladding or refurbishment work.
Shelf Angle Bricks A range of thicknesses is available.
102 51
a 164 a
215
102
102
B 65
B
65 A A
I.SA.6 Rebated Stretcher External Angle I.SA.7 Rebated Stretcher Squint External Angle
(Left & Right Hand) (Left & Right Hand)
Type No. A B a Type No. A B a
I.SA.6.1 82 15 30° I.SA.7.1 82 15 30°
I.SA.6.2 82 25 30° I.SA.7.2 82 25 30°
I.SA.6.3 82 35 30° I.SA.7.3 82 35 30°
I.SA.6.4 77 15 30° I.SA.7.4 77 15 30°
I.SA.6.5 77 25 30° I.SA.7.5 77 25 30°
I.SA.6.6 77 35 30° I.SA.7.6 77 35 30°
I.SA.6.7 72 15 30° I.SA.7.7 72 15 30°
I.SA.6.8 72 25 30° I.SA.7.8 72 25 30°
I.SA.6.9 72 35 30° I.SA.7.9 72 35 30° Pedestrian Underpass, Ayr, Scotland | Multi Red Smooth - SL.1.1 Brick Faced Slip
I.SA.6.10 82 15 45° I.SA.7.10 82 15 45°
I.SA.6.11 82 25 45° I.SA.7.11 82 25 45°
I.SA.6.12 82 35 45° I.SA.7.12 82 35 45°
I.SA.6.13 77 15 45° I.SA.7.13 77 15 45°
I.SA.6.14 77 25 45° I.SA.7.14 77 25 45°
I.SA.6.15 77 35 45° I.SA.7.15 77 35 45° C
I.SA.6.16 72 15 45° I.SA.7.16 72 15 45° C
I.SA.6.17 72 25 45° I.SA.7.17 72 25 45°
B A
I.SA.6.18 72 35 45° I.SA.7.18 72 35 45°
I.SA.6.19 82 15 60° I.SA.7.19 82 15 60° A
I.SA.6.20 82 25 60° I.SA.7.20 82 25 60° B
I.SA.6.21 82 35 60° I.SA.7.21 82 35 60°
I.SA.6.22 77 15 60° I.SA.7.22 77 15 60° SL.1 Brick Faced Slip
I.SA.6.23 77 25 60° I.SA.7.23 77 25 60° Type No. A B C
I.SA.6.24 77 35 60° I.SA.7.24 77 35 60° SL.1.1 215 25 65
I.SA.6.25 72 15 60° I.SA.7.25 72 15 60° SL.1.2 215 30 65 SL.2 Brick Bed Slip
I.SA.6.26 72 25 60° I.SA.7.26 72 25 60° SL.1.3 215 40 65 Type No. A B C
I.SA.6.27 72 35 60° I.SA.7.27 72 35 60° SL.1.4 215 50 65 SL.2 215 102 25
192
Soldier Bricks D D
A
At Ibstock we have expanded the British Standard range of soldier bricks to include specials to help maintain bond. E
B C
D D
SD.3 Soldier External Return To Single Cant End*
B C
Type No. A B C D E
A SD.3.1 215 102 102 46 159
E SD.3.2 215 102 102 60 173
A
D
B C
A
SD.2 Soldier Internal Return To Single Cant On End*
SD.1 Soldier External Return Type No. A B C D E
B C
Type No. A B C Type No. A B C SD.2.1 215 102 102 46 159
AN.5.1
SD.3.1
C L.H. SHOWN
B
I.SD.4 A D
B C
MIRROR
I.SD.5
I.SD.6 Soldier External Return To Single Cant On End
Type No. A B C D
I.SD.6.1 215 140 140 159
I.SD.6.2 215 140 140 173
193
* May be used in sill or plinth situations. † An Ibstock special designed to maintain bond with brickwork above and below.
B
B
C
Spiral Bricks A
C
600mm
400mm
I.P.1 Pineapple Brick To 400mm Diameter Column I.P.2 Pineapple Brick To 600mm Diameter Column
Mosque, Leeds, West Yorkshire
Type No. A B C Type No. A B C
Cheddar Golden | I.SP.1.2 Spiral Brick to 400mm
Diameter Column Anti-clockwise I.P.1 275 180 65 I.P.2 220 143 65
194
Universal Joints (including Easyangle®) I.UJ.2
The Ibstock Universal Joint range is an innovative way The Universal Joint range is available as standard in
of forming returns and angles which has now become the following colours: D A
A C
an established detail for variable angles through 180˚
Colour/Type Product E I.UJ.1
making a decorative and practical solution to all designs. B
Red Smooth Cheddar Red
R B
The Universal Joint is available in two formats: Easyangle® Ravenhead Red Smooth
and a two piece option. The two piece option gives D
Blue Smooth Staffordshire Slate Blue Smooth R
a more pristine finish, whilst the one piece reduces C E
Buff Smooth Cheddar Golden Plan view of two
complexity on site and is very cost effective. Both options
Smooth Buff piece Universal Joint
are shown.
Red Sanded Stock Parham Red Stock
We also offer a unique Ibstock Universal Joint stop Leicester Red Stock
special, the ‘Elephants Foot’, which can be used to give I.UJ.1 Universal Joint Male I.UJ.2 Universal Joint Female
both a functional and decorative appeal to corners. Other colours may be available on request – Type No. A B C D E R Type No. A B C D E R
please contact your local sales office for advice. I.UJ.1 102 65 215 106 26 51 I.UJ.2 102 65 218 230 12 61
I.UJ.1
I.UJ.2
C
A
L.H. SHOWN
I.UJ.3
A A
A a B
B A
B
A B C
R
a C D
D D
C
C D A
L.H. SHOWN I.UJ.5 Elephants Foot External Angle To Be Used In I.UJ.6 Elephants Foot Stop Internal Angle To Be Used
Conjunction With I.UJ.1 & I.UJ.2 (Left & Right Hand) In Conjunction With I.UJ.1 & I.UJ.2 (Left & Right Hand) L.H. SHOWN
I.UJ.4 Elephants Foot Stop 90° Return, To Be Used In Type No. A B C D a Type No. A B C D a
Conjunction With I.UJ.1 & I.UJ.2 (Left & Right Hand) I.UJ.7 Easyangle® (Left & Right Hand)
I.UJ.5.1 102 65 159 215 30° I.UJ.6.1 102 65 102 215 30°
Type No. A B C D I.UJ.5.2 102 65 159 215 45° I.UJ.6.2 102 65 102 215 45° Type No. A B C D R
I.UJ.4 102 65 159 215 I.UJ.5.3 102 65 159 215 60° I.UJ.6.3 102 65 102 215 60° I.UJ.7.1 215 102 65 102 54
195
Special Shapes Index
BS & Ibstock BS & Ibstock BS & Ibstock BS & Ibstock BS & Ibstock BS & Ibstock BS & Ibstock BS & Ibstock BS & Ibstock BS & Ibstock
Reference Page Reference Page Reference Page Reference Page Reference Page Reference Page Reference Page Reference Page Reference Page Reference Page
AN.1.1 166 AN.17.1 168 BN.10.4 173 BN.21.12 176 I.C.2.1 184 I.F.3.1 182 I.SA.1.9 191 I.SA.5.5 191 I.SA.7.19 192 PL.6.13 186
AN.1.2 166 AN.17.2 168 BN.11.1 173 CB.1.1 171 I.C.2.2 184 I.F.3.2 182 I.SA.2.1 191 I.SA.5.6 191 I.SA.7.20 192 PL.6.14 186
AN.1.3 166 AN.18.1 169 BN.11.2 173 CB.1.2 171 I.C.2.3 184 I.F.4.1 182 I.SA.2.2 191 I.SA.5.7 191 I.SA.7.21 192 PL.6.15 186
AN.2.1 166 AN.18.2 169 BN.11.3 173 CB.1.3 171 I.C.2.4 184 I.F.4.2 182 I.SA.2.3 191 I.SA.5.8 191 I.SA.7.22 192 PL.6.16 186
AN.2.2 166 AN.18.3 169 BN.11.4 173 CB.1.4 171 I.C.2.5 184 I.F.5.1 182 I.SA.2.4 191 I.SA.5.9 191 I.SA.7.23 192 PL.6.17 186
AN.2.3 166 AN.18.4 169 BN.12.1 173 CB.1.5 171 I.C.2.6 184 I.F.5.2 182 I.SA.2.5 191 I.SA.6.1 192 I.SA.7.24 192 PL.6.18 186
AN.2.4 166 AN.18.5 169 BN.12.2 173 CB.1.6 171 I.C.3.1 184 I.F.5.3 182 I.SA.2.6 191 I.SA.6.2 192 I.SA.7.25 192 PL.7.1 187
AN.2.5 166 AN.18.6 169 BN.13.1 173 CB.1.7 171 I.C.3.2 184 I.F.5.4 182 I.SA.2.7 191 I.SA.6.3 192 I.SA.7.26 192 PL.7.2 187
AN.2.6 166 AR.1.1 170 BN.13.2 173 CB.1.8 171 I.C.3.3 184 I.F.5.5 182 I.SA.2.8 191 I.SA.6.4 192 I.SA.7.27 192 PL.8.1 187
AN.3.1 166 AR.1.2 170 BN.14.1 174 CB.1.9 171 I.C.3.4 184 I.F.5.6 182 I.SA.2.9 191 I.SA.6.5 192 I.SD.4 193 PL.8.2 187
AN.3.2 166 AR.1.3 170 BN.14.2 174 CB.1.10 171 I.C.4.1 184 I.F.6.1 182 I.SA.3.1 191 I.SA.6.6 192 I.SD.5 193 PL.8.3 187
AN.3.3 166 AR.1.4 170 BN.15.1 174 CB.1.11 171 I.C.4.2 184 I.F.6.2 182 I.SA.3.2 191 I.SA.6.7 192 I.SD.6.1 193 PL.8.4 187
AN.3.4 166 AR.2.1 170 BN.15.2 174 C.P.1.1 178 I.C.4.3 184 I.F.7.1 182 I.SA.3.3 191 I.SA.6.8 192 I.SD.6.2 193 PL.8.5 187
AN.3.5 166 AR.2.2 170 BN.15.3 174 C.P.1.2 178 I.C.4.4 184 I.F.7.2 182 I.SA.3.4 191 I.SA.6.9 192 I.SP.1.1 194 PL.8.6 187
AN.3.6 166 AR.2.3 170 BN.15.4 174 CP.2.1 180 I.C.5.1 185 I.P.1 194 I.SA.3.5 191 I.SA.6.10 192 I.SP.1.2 194 PL.8.7 187
AN.3.7 166 AR.2.4 170 BN.15.5 174 CP.2.2 180 I.C.5.2 185 I.P.2 194 I.SA.3.6 191 I.SA.6.11 192 I.SP.2.1 194 PL.8.8 187
AN.3.8 166 BD.1.1 171 BN.15.6 174 I.AN.19.1 169 I.C.6.1 185 I.PL.9.1 188 I.SA.3.7 191 I.SA.6.12 192 I.SP.2.2 194 PL.8.9 187
AN.3.9 166 BD.1.2 171 BN.15.7 174 I.AN.19.2 169 I.C.6.2 185 I.PL.9.2 188 I.SA.3.8 191 I.SA.6.13 192 I.UJ.1 195 PL.8.10 187
AN.5.1 166 BD.1.3 171 BN.15.8 174 I.AN.20.1 169 I.C.7.1 185 I.PL.10.1 188 I.SA.3.9 191 I.SA.6.14 192 I.UJ.2 195 PL.8.11 187
special shapes | index
AN.5.2 166 BD.2 171 BN.16.1 174 I.AN.20.2 169 I.C.7.2 185 I.PL.10.2 188 I.SA.3.10 191 I.SA.6.15 192 I.UJ.3 195 PL.8.12 187
AN.6.1 166 BD.3 171 BN.16.2 174 I.AN.21.1 169 I.C.7.3 185 I.PL.11.1 188 I.SA.3.11 191 I.SA.6.16 192 I.UJ.4 195 PL.9.1 187
AN.6.2 166 BD.4.1 171 BN.17.1 175 I.AN.21.2 169 I.C.7.4 185 I.PL.11.2 188 I.SA.3.12 191 I.SA.6.17 192 I.UJ.5.1 195 PL.9.2 187
AN.7.1 167 BD.4.2 171 BN.17.2 175 I.AN.22.1 169 I.C.7.5 185 I.PL.12.1 188 I.SA.3.13 191 I.SA.6.18 192 I.UJ.5.2 195 PL.9.3 187
AN.7.2 167 BD.4.3 171 BN.18.1 175 I.AN.22.2 169 I.C.7.6 185 I.PL.12.2 188 I.SA.3.14 191 I.SA.6.19 192 I.UJ.5.3 195 PL.9.4 187
AN.8.1 167 BD.4.4 171 BN.18.2 175 I.AR.1.1-1 170 I.C.8.1 185 I.PL.13.1 189 I.SA.3.15 191 I.SA.6.20 192 I.UJ.6.1 195 PL.9.5 187
AN.8.2 167 BN.1.1 172 BN.18.3 175 I.AR.1.2-1 170 I.C.8.2 185 I.PL.14.1 189 I.SA.3.16 191 I.SA.6.21 192 I.UJ.6.2 195 PL.9.6 187
AN.9.1 167 BN.1.2 172 BN.18.4 175 I.AR.1.3-1 170 I.C.8.3 185 I.PL.15.1 189 I.SA.3.17 191 I.SA.6.22 192 I.UJ.6.3 195 RD.1.1 190
AN.9.2 167 BN.2.1 172 BN.18.5 175 I.AR.2.1-1 170 I.C.8.4 185 I.RD.1.3-1 190 I.SA.3.18 191 I.SA.6.23 192 I.UJ.7.1 195 RD.1.2 190
AN10.1 167 BN.2.2 172 BN.18.6 175 I.AR.2.2-1 170 I.C.8.5 185 I.RD.1.4-1 190 I.SA.3.19 191 I.SA.6.24 192 PL.1.1 186 RD.1.3 190
AN10.2 167 BN.3.1 172 BN.18.7 175 I.AR.2.3-1 170 I.C.8.6 185 I.RD.1.5-1 190 I.SA.3.20 191 I.SA.6.25 192 PL.1.2 186 RD.1.4 190
AN.10.3 167 BN.3.2 172 BN.18.8 175 I.BC.1.1 182 I.C.10.1 189 I.RD.2.3-1 190 I.SA.3.21 191 I.SA.6.26 192 PL.2.1 186 RD.1.5 190
AN.10.4 167 BN.4.1 172 BN.19.1 175 I.BC.1.2 182 I.C.10.2 189 I.RD.2.4-1 190 I.SA.3.22 191 I.SA.6.27 192 PL.2.2 186 RD.1.6 190
AN.10.5 167 BN.4.2 172 BN.19.2 175 I.BC.6.1 183 I.C.16.1 189 I.RD.2.5-1 190 I.SA.3.23 191 I.SA.7.1 192 PL.3.1 186 RD.2.1 190
AN.10.6 167 BN.5.1 172 BN.19.3 175 I.BC.6.2 183 I.C.16.2 189 I.RD.3.1 190 I.SA.3.24 191 I.SA.7.2 192 PL.3.2 186 RD.2.2 190
AN.11.1 167 BN.5.2 172 BN.19.4 175 I.BC.8.1 183 I.CP.5.1 178 I.RD.3.2 190 I.SA.3.25 191 I.SA.7.3 192 PL.4.1 186 RD.2.3 190
AN.11.2 167 BN.6.1 172 BN.20.1 176 I.BC.8.2 183 I.CP.5.2 178 I.RD.3.3 190 I.SA.3.26 191 I.SA.7.4 192 PL.4.2 186 RD.2.4 190
AN.11.3 167 BN.6.2 172 BN.20.2 176 I.BC.9.1 183 I.CP.6.1 179 I.RD.3.4 190 I.SA.3.27 191 I.SA.7.5 192 PL.5.1 186 RD.2.5 190
AN.11.4 167 BN.7.1 172 BN.20.3 176 I.BC.9.2 183 I.CP.6.2 179 I.RD.3.5 190 I.SA.4.1 191 I.SA.7.6 192 PL.5.2 186 RD.2.6 190
AN.11.5 167 BN.7.2 172 BN.20.4 176 I.BN.22.1 177 I.CP.7.1 180 I.RD.3.6 190 I.SA.4.2 191 I.SA.7.7 192 PL.6.1 186 SD.1.1 193
AN.11.6 167 BN.7.3 172 BN.21.1 176 I.BN.22.2 177 I.CP.7.2 180 I.RD.3.7 190 I.SA.4.3 191 I.SA.7.8 192 PL.6.2 186 SD.1.2 193
AN.12.1 168 BN.7.4 172 BN.21.2 176 I.BN.22.3 177 I.CP.9.1 181 I.RD.3.8 190 I.SA.4.4 191 I.SA.7.9 192 PL.6.3 186 SD.2.1 193
AN.12.2 168 BN.8.1 172 BN.21.3 176 I.BN.22.4 177 I.CP.9.2 181 I.RD.3.9 190 I.SA.4.5 191 I.SA.7.10 192 PL.6.4 186 SD.2.2 193
AN.13.1 168 BN.8.2 172 BN.21.4 176 I.BN.25.1 177 I.CP.20.1 179 I.SA.1.1 191 I.SA.4.6 191 I.SA.7.11 192 PL.6.5 186 SD.3.1 193
AN.13.2 168 BN.8.3 172 BN.21.5 176 I.BN.25.2 177 I.CP.20.2 179 I.SA.1.2 191 I.SA.4.7 191 I.SA.7.12 192 PL.6.6 186 SD.3.2 193
AN.14.1 168 BN.8.4 172 BN.21.6 176 I.C.1.1 184 I.CP.21.1 181 I.SA.1.3 191 I.SA.4.8 191 I.SA.7.13 192 PL.6.7 186 SL.1.1 192
AN.14.2 168 BN.9.1 172 BN.21.7 176 I.C.1.2 184 I.CP.21.2 181 I.SA.1.4 191 I.SA.4.9 191 I.SA.7.14 192 PL.6.8 186 SL.1.2 192
AN.15.1 168 BN.9.2 172 BN.21.8 176 I.C.1.3 184 I.F.1.1 182 I.SA.1.5 191 I.SA.5.1 191 I.SA.7.15 192 PL.6.9 186 SL.1.3 192
AN.15.2 168 BN.10.1 173 BN.21.9 176 I.C.1.4 184 I.F.1.2 182 I.SA.1.6 191 I.SA.5.2 191 I.SA.7.16 192 PL.6.10 186 SL.1.4 192
AN.16.1 168 BN.10.2 173 BN.21.10 176 I.C.1.5 184 I.F.2.1 182 I.SA.1.7 191 I.SA.5.3 191 I.SA.7.17 192 PL.6.11 186 SL.2 192
196 AN.16.2 168 BN.10.3 173 BN.21.11 176 I.C.1.6 184 I.F.2.2 182 I.SA.1.8 191 I.SA.5.4 191 I.SA.7.18 192 PL.6.12 186