after Main Electrical Power restored Restarting of Main Engine after Main Electrical Power restored: 1. Request Bridge to shift Telegraph to stop position. 2.When main power restored, all main engine service systems will be restored automatically by sequential start of pumps. 3.Confirm that jacket cooling water pressure, lubricating oil pressure, fuel oil pressure are normal. After reset by pressing “cause reset” button, no highlighted red lines on the BMS-2000 control panel on the page “shut down, slow down”. If for any reason any line on “shut down, slow down” page is highlighted red, rectify it by bringing the respective system to operational status. 4.Request Bridge to start Main Engine and give the steps for telegraph according to navigational situation.
Restarting of Aux. Boiler after Main Electrical Power
restored:
1. Restart Boiler FD fan.
2.Confirm that Boiler Control Panel alive. Reset all alarms by pressing reset button. 3. Restart Boiler by shifting the “BNR OPERATION” switch to
“AUTO ON” position. Turn switch to this position and release, it
will come back to “AUTO” position by its own. Date: 07.04.2018 Signature/Approval C/E