Professional Documents
Culture Documents
Summary
Case Description Alignment Price in INR
1 MS Pipe with 300 mm Dia Along Nalla ₹ 8,70,67,115
2 MS Pipe with 300 mm Dia Along Road ₹ 7,71,74,919
3 MS Pipe with 150 mm Dia Along Nalla ₹ 4,98,78,140
4 MS Pipe with 150 mm Dia Along Road ₹ 4,46,38,400 Recommended
5 GI Pipe with 150 mm Dia Along Road ₹ 2,98,87,140
Notes -
1.Price above is exclusive of
a) Lisening Cost
b) Cost required to resolve local issues
c) All applicable taxes
Pipe Length considered are based on measurement done using Google earth and basic survey by road
Actual length will be decided only after detailed survey
Basic Calculations-
Discharge (lit/day)
Pipe Dia Velocity
in m m/s 23hr Pumping 12 hr. pumping
0.3 1.7 99,49,738 51,91,168
0.15 1.5 21,94,795 11,45,111
We can proceed with 150 mm diameter MS pipe along the road alignment with 23 hrs. of pumping.
Following points are considered-
1.Life of MS material is 30-35 years while of GI is 7-8 years only We recommend to go with MS material with
2.Tapping is easy for GI material then MS Epoxy coating
3. Maintenance of MS pipe is easy as compare to GI.
4.IF we are going with alignment by Nalla then following issues are there
a. Chances of corrosion will be increased
b. Dewatering cost will be more
c. we may face issues during the welding connection We recommend to go with Road alignment
d. Difficult for construction
e. Extra amount due to requirement's of chairs
5. for smaller diameter pipe initial cost will be less but the operating cost will increase @ 20 %.
But considering our demand we can proceed with 150 mm dia pipe.
6.We understand the future demand is around 20 lac lit/day considering this
the final water storage with 50 % buffer should be 30 lac/ lit/day.
Out of this 20 lacs lit/ day can be utilized from this resource
for initial period we can go with 12 hr. of pumping to meet the current demand
Case 1-MS Pipe-300mm Dia _along Nalla
Pipe Line Work for Khandala Township_Phase 1_From Panchpatra River to Jackwell near Adoshi Dam
Raw Water Pumping Main 300mm dia MS pipe
Sr. No Description of Item Qty Unit Rate Amount
1 Survey work 8 KM 12000 96000
2.1 300 mm I.D. 8 mm thick (below GL) 8000 RMT 4900 39200000
2.2 100 mm I.D. 8 mm thick (for scour valve) 50 RMT 2100 105000
5 Air Cushion Valves tramper proof-Providing supplying lowering and 10 NO 28350 283500
laying Vaccum breaker cum air cushion valve designed as per
specification attached in the tender with isolating butterfly valve having
body disc and end cover in graded cast iron to IS 210 Gr. CF 200 generally
conforming BS 5155, synthetic rubber faced ring secured on disc by
retaining ring with stainless steel
Case 1-MS Pipe-300mm Dia _along Nalla
Providing, lowering laying Erecting Non return valve 300 mm 1 NO 55000 55000
8 Murum bedding 200 mm Thick-Filling in plinth and floors, murum 1600 CUM 280 448000
bedding in trenches with approved murum from excavated materials
from foundation in 15 cm to 20 cm layers including watering and
compaction complete.
9 Lowering Laying And Transporting M.S.Pipe and specials '8 mm 8050 RMT 367.5 2958375
thick'-Transporting, laying in position to correct line and level M.S. pipes
and specials with/without any outcoating, on prepared bedding in
trenches/on pedestals or chairs upon piers, trestles, etc. marginal
cutting wherever required, assembling, tack welding the same.The
rate to include loading,
unloading, hoisting, etc. complete as specified.
10 Providing Epoxy Painting (Food grade ) indide of pipe-Providing & 7540 SQM 949.2 7156968
applying primer one coat of Epoxy Paint or equivalent such as Dr.
bake, Krishana conchem, Asian paint, Atul limited, Burger Paint, Epoxy
primer 50 to 60Microns thick and two coats of gamma coatings or
equivalent such as Dr. bake, Krishana conchem, Asian paint, Atul
limited, Burger Paints 30 microns thick each to new M.S. pipes and
structural steel or concrete surface including repainting the surface
by finishing by solvent degreasing and derusting by applying chemical
method and scaffholding if neccesarry etc
complete as per manufacturer's specifications
13 PCC M15-Providing and laying in situ, following grades of C.C. of M 15 50 CUM 6000 300000
trap/granite/quartzite/gneiss metal for foundation and bedding
including bailing out water, form work, compacting and curing,
finishing etc. complete.
14.2 In RMC M-20 For foundation Chairs 150 CUM 9000 1350000
17 Gas cutting for pipes-Gas cutting (either square cut or 'V' cut) pipes, 500 RMT 110 55000
plates etc. of thickness
Case 1-MS Pipe-300mm Dia _along Nalla
18 Providing and constructing Brick chambers-Providing and constructing
on sewer B.B. masonry circular manhole chamber with concentric
cone 1.2m dia. at bottom and 0.5 dia. at top upto depth of 2m, 1.5m dia
at bottom and 0.5m at top upto depth 9.0m, with 20cm thick brick
work, upto depth of 2.0m from top of MH and 35cm thick brickwork for
next depth upto 5m. Depth of chamber and for depth upto 9m,
23cm thick brick work upto depth 2m from the top of manhole chamber
and 35 cm thick brickwork for a depth upto 5 m and 45cm thick brick
work for remaining depth upto 9m in C.M. 1:4 proportion with 20mm
thick smooth plaster on both sides in C.M. 1:2 proportion including
additional excavation, foundation concrete 250mm thick and
hounches and channels in C.C. 1:2:4 proportion, finishing channels in
smooth rendering, providing and fixing C.I. Dapauri types steps, each
weighing 5.5kg, 1:2:4 coping and providing and fixing approved make
and quality S.F.R.C. frame and cover of 56cm dia. (20 tonnes
capacity), etc. complete as directed by Engineer-Incharge.
19 Refilling the trenches-Filling in plinth and floors murum bedding in 11500 CUM 100 1150000
trenches with approved murum from excavated materials from
foundation in 15 cm to 20 cm layers including watering and
compaction complete.
22 Removal of Hording, trees, pole, structure and hurdles if any along the LS LS 1 500000
alignment of pipeline and refixation or shifting.
2.1 300 mm I.D. 8 mm thick (below GL) 7200 RMT 4900 35280000
2.2 100 mm I.D. 8 mm thick (for scour valve) 50 RMT 2100 105000
Providing, lowering laying Erecting Non return valve 300 mm 1 NO 55000 55000
9 Lowering Laying And Transporting M.S.Pipe and specials '8 mm 7200 RMT 368 2646000
thick'-Transporting, laying in position to correct line and level M.S. pipes
and specials with/without any outcoating, on prepared bedding in
trenches/on pedestals or chairs upon piers, trestles, etc. marginal
cutting wherever required, assembling, tack welding the same.The
rate to include loading,
unloading, hoisting, etc. complete as specified.
10 Providing Epoxy Painting (Food grade ) indide of pipe-Providing & 6786 SQM 949 6441271.2
applying primer one coat of Epoxy Paint or equivalent such as Dr.
bake, Krishana conchem, Asian paint, Atul limited, Burger Paint,
Epoxy primer 50 to 60Microns thick and two coats of gamma coatings
or equivalent such as Dr. bake, Krishana conchem, Asian paint,
Atul limited, Burger Paints 30 microns thick each to new M.S. pipes and
structural steel or concrete surface including repainting the surface
by finishing by solvent degreasing and derusting by applying chemical
method and scaffholding if neccesarry etc
complete as per manufacturer's specifications
12 Hydraulic testing of M.S. pipeline FOR 300 mm-Hydraulic testing of 8 KM 42000 336000
M.S. pipeline to specified pressure including cost of all materials
and labour and water for testing for the length minimum 1 km, using
reciprocating type pumps which should be able to provide specified
test pressure gauges and other necessary equipments, labour
operation charges, etc. required for testing. The rate under this item
shall also include cost of retesting, if necessary.
13 PCC M15-Providing and laying in situ, following grades of C.C. of M 15 50 CUM 6000 300000
trap/granite/quartzite/gneiss metal for foundation and bedding
including bailing out water, form work, compacting and curing,
finishing etc. complete.
14.2 In RMC M-200 For foundation Chairs 150 CUM 9000 1350000
15 REINFORCEMENT Fe 500-Providing and fixing in position steel bar 22.5 MT 65000 1462500
reinforcement of various diameters for RCC piles, caps,
footings, foundations slabs, beams, foundations, slabs, beams,
columns, canopies, fins, arches etc. as per detailed designs,
drawings, and schedule, including cutting, bending hooking the
bars, binding with wires or tack welding and supporting as
required, etc. complete. (including cost of binding wire)
Case 2-MS Pipe-300mm Dia_along Road
17 Gas cutting for pipes-Gas cutting (either square cut or 'V' cut) 500 RMT 110 55000
pipes, plates etc. of thickness
19 Refilling the trenches-Filling in plinth and floors murum 11000 CUM 100 1100000
bedding in trenches with approved murum from excavated
materials from foundation in 15 cm to 20 cm layers
including watering and compaction complete.
22 Removal of Hording, trees, pole, structure and hurdles if any along the 0 LS 1 500000
alignment of pipeline and refixation or shifting.
2.1 300 mm I.D. 8 mm thick (below GL) 8000 RMT 2600 20800000
2.2 100 mm I.D. 8 mm thick (for scour valve) 50 RMT 2000 100000
8 Murum bedding 200 mm Thick-Filling in plinth and 1600 CUM 280 448000
floors, murum bedding in trenches with approved
murum from excavated materials from foundation in 15
cm to 20 cm layers including watering and compaction
complete.
9 Lowering Laying And Transporting M.S.Pipe and 8000 RMT 385 3080000
specials '8 mm thick'-Transporting, laying in position to
correct line and level M.S. pipes and specials
with/without any outcoating, on prepared bedding in
trenches/on pedestals or chairs upon piers, trestles,
etc. marginal cutting wherever required, assembling, tack
welding the same.The rate to include loading,
unloading, hoisting, etc. complete as specified.
10 Providing Epoxy Painting (Food grade ) indide of pipe- 3500 SQM 949 3321500
Providing & applying primer one coat of Epoxy Paint
or equivalent such as Dr. bake, Krishana conchem, Asian
paint, Atul limited, Burger Paint, Epoxy primer 50 to
60Microns thick and two coats of gamma coatings or
equivalent such as Dr. bake, Krishana conchem,
Asian paint, Atul limited, Burger Paints 30 microns
thick each to new M.S. pipes and structural steel or
concrete surface including repainting the surface by
finishing by solvent degreasing and derusting by applying
chemical method and scaffholding if neccesarry etc
complete as per manufacturer's specifications
Case 3-MS Pipe-150mm Dia_along Nalla
13 PCC M15-Providing and laying in situ, following grades of 25 CUM 6000 150000
C.C. of M 15 trap/granite/quartzite/gneiss metal for
foundation and bedding including bailing out
water, form work, compacting and curing, finishing
etc. complete.
14.2 In RMC M-200 For foundation Chairs 100 CUM 9000 900000
17 Gas cutting for pipes-Gas cutting (either square cut or 'V' 500 RMT 110 55000
cut) pipes, plates etc. of thickness
19 Refilling the trenches-Filling in plinth and floors 6500 CUM 100 650000
murum bedding in trenches with approved murum
from excavated materials from foundation in 15 cm
to 20 cm layers including watering and compaction
complete.
2.1 150 mm I.D. 8 mm thick (below GL) 7200 RMT 2600 18720000
2.2 100 mm I.D. 8 mm thick (for scour valve) 50 RMT 2000 100000
8 Murum bedding 200 mm Thick-Filling in plinth and 1440 CUM 280 403200
floors, murum bedding in trenches with approved
murum from excavated materials from foundation in
15 cm to 20 cm layers including watering and
compaction complete.
9 Lowering Laying And Transporting M.S.Pipe and 7200 RMT 385 2772000
specials '8 mm thick'-Transporting, laying in position to
correct line and level M.S. pipes and specials
with/without any outcoating, on prepared bedding in
trenches/on pedestals or chairs upon piers,
trestles, etc. marginal cutting wherever required,
assembling, tack welding the same.The rate to
include loading,
unloading, hoisting, etc. complete as specified.
Case 4-MS Pipe-150mm Dia_along Road
10 Providing Epoxy Painting (Food grade ) indide of pipe- 3400 SQM 949 3226600
Providing & applying primer one coat of Epoxy
Paint or equivalent such as Dr. bake, Krishana
conchem, Asian paint, Atul limited, Burger Paint,
Epoxy primer 50 to 60Microns thick and two coats
of gamma coatings or equivalent such as Dr. bake,
Krishana conchem, Asian paint, Atul limited,
Burger Paints 30 microns thick each to new M.S. pipes
and structural steel or concrete surface including
repainting the surface by finishing by solvent
degreasing and derusting by applying chemical
method and scaffholding if neccesarry etc
complete as per manufacturer's specifications
12 Hydraulic testing of M.S. pipeline FOR 300 mm- 7.2 KM 42000 302400
Hydraulic testing of M.S. pipeline to specified
pressure including cost of all materials and labour
and water for testing for the length minimum 1 km,
using reciprocating type pumps which should be
able to provide specified test pressure gauges and
other necessary equipments, labour operation
charges, etc. required for testing. The rate under
this item shall also include cost of retesting, if
necessary.
13 PCC M15-Providing and laying in situ, following grades 25 CUM 6000 150000
of C.C. of M 15 trap/granite/quartzite/gneiss metal
for foundation and bedding including bailing out
water, form work, compacting and curing, finishing
etc. complete.
17 Gas cutting for pipes-Gas cutting (either square cut or 500 RMT 110 55000
'V' cut) pipes, plates etc. of thickness
2 Providing ISI mark G.I. pipes of following class and dia. including all local and
central taxes, octroi, inspection charges, transportation to stores, etc.
complete. (IS-1239/2004
2.1 150 mm I.D. 8 mm thick (below GL) (21.80 kg/m) 7200 RMT 2000 14400000
2.2 100 mm I.D. 8 mm thick (for scour valve) 50 RMT 1500 75000
3 Sluice Valves PN - 1.6 without bypass-Providing double flanged sluice Valve 70000
conforming to IS 2906/14846 including worm gear arrangements as per
test pressure, stainless steel spindle, caps, including all taxes,
transportation, etc. complete.
300 mm 4 NO 12810 51240
100 mm 4 NO 4000 16000
5 Air Cushion Valves tramper proof-Providing supplying lowering and laying 10 NO 28350 283500
Vaccum breaker cum air cushion valve designed as per specification
attached in the tender with isolating butterfly valve having body disc and end
cover in graded cast iron to IS 210 Gr. CF 200 generally conforming BS 5155,
synthetic rubber faced ring secured on disc by retaining ring with stainless
steel
7 Excavation in Soft Rock and Hard Rock-Excavation for pipe trenches in earth, soils of
all types, sand, gravel and soft murum, hard murum and boulders,W.B.M. road
including removing the excavated material upto a distance of 50 metres and
lifts as below, stacking and spreading as directed, normal dewatering, preparing the
bed
0 - 1.5 m 7000 CUM 950 6650000
8 Murum bedding 200 mm Thick-Filling in plinth and floors, murum bedding in 1100 CUM 280 308000
trenches with approved murum from excavated materials from foundation in 15 cm to
20 cm layers including watering and compaction complete.
9 Lowering Laying And Transporting M.S.Pipe and specials '8 mm thick'- 7200 RMT 385 2772000
Transporting, laying in position to correct line and level M.S. pipes and specials
with/without any outcoating, on prepared bedding in trenches/on pedestals or
chairs upon piers, trestles, etc. marginal cutting wherever required, assembling, tack
welding the same.The rate to include loading,
unloading, hoisting, etc. complete as specified.
10 Providing Epoxy Painting (Food grade ) indide of pipe-Providing & applying primer 0 SQM 985 0
one coat of Epoxy Paint or equivalent such as Dr. bake, Krishana conchem, Asian
paint, Atul limited, Burger Paint, Epoxy primer 50 to 60Microns thick and two
coats of gamma coatings or equivalent such as Dr. bake, Krishana conchem, Asian
paint, Atul limited, Burger Paints 30 microns thick each to new M.S. pipes and
structural steel or concrete surface including repainting the surface by finishing by
solvent degreasing and derusting by applying chemical method and scaffholding if
neccesarry etc
complete as per manufacturer's specifications
Case 5-GI Pipe-150mm dia_along Road
12 Hydraulic testing of M.S. pipeline FOR 300 mm-Hydraulic testing of M.S. pipeline to 7.2 KM 42000 302400
specified pressure including cost of all materials and labour and water for testing
for the length minimum 1 km, using reciprocating type pumps which should be able
to provide specified test pressure gauges and other necessary equipments, labour
operation charges, etc. required for testing. The rate under this item shall also
include cost of retesting, if necessary.
13 PCC M15-Providing and laying in situ, following grades of C.C. of M 15 25 CUM 6000 150000
trap/granite/quartzite/gneiss metal for foundation and bedding including bailing
out water, form work, compacting and curing, finishing etc. complete.
15 REINFORCEMENT Fe 500-Providing and fixing in position steel bar reinforcement of 12 MT 65000 780000
various diameters for RCC piles, caps, footings, foundations slabs, beams,
foundations, slabs, beams, columns, canopies, fins, arches etc. as per detailed
designs, drawings, and schedule, including cutting, bending hooking the bars,
binding with wires or tack welding and supporting as required, etc. complete.
(including cost of binding wire)
16 Welding in all positions with required number of runs, for M.S. pipes internally
and or externally including gauging wherever necessary, fixing appurtenances
and other accessories in connection with pipe laying work as specification.
17 Gas cutting for pipes-Gas cutting (either square cut or 'V' cut) pipes, plates etc. 500 RMT 110 55000
of thickness
19 Refilling the trenches-Filling in plinth and floors murum bedding in 6500 CUM 100 650000
trenches with approved murum from excavated materials from foundation
in 15 cm to 20 cm layers including watering and compaction complete.
Case 5-GI Pipe-150mm dia_along Road
20 Disposal of surplus excavated material-Transportation of material such as 500 CUM 260 130000
excavated soil, murum, rock, bricks, concrete, steel, railing, stone,
roofing material, doors, windows, grills, pipes, wood, flooring etc. Filling
in truck and shifting /transporting it safely within all leads. This item
includes loading, un - loading, stacking, weighing if necessary and
transportation of material etc. complete.
0 Hr 80 0
21 Dewatering
LS LS 300000
22 Removal of Hording, trees, pole, structure and hurdles if any along the alignment of
pipeline and refixation or shifting.
LS LS 1 100000
23 Electrical work
0
24 Full Bore Electromagnetic Flow meter : Manufacturing, supplying & 2 No 200000 400000
commissioning electromagnetic flow meter (EMF) with HART facility for Raw /
Pure water with accuracy +/- 0.5 % of measured of value & protection as per
given specifications for size 100 mm- 1000 mm including sensor, transmitter
surge arrestor, cable duct separate PVC of 25 mm dia for 25 Mtrs, flow meter,
including the pipe line cutting, leveling & installation of flow meters in the
pipelines with necessary tool tackles, cranes etc. as may be required at site &
based on technical specifications to the satisfaction of Project Management
Consultant/Engineer in Charge.
25 Providing and Fixing MS specials 1000 Kg 80 80000
TOTAL 29887140