Professional Documents
Culture Documents
Please see notes below for important information regarding sealing surfaces for flat face flanges.
Gaskets:
Use full face gasket , 3/16” thick, with a Shore A scale hardness of 60 to 70 durometer.
Torque Requirements:
Use of a torque wrench is strongly recommended for installation of flanged piping systems.
Use SAE standard washers under all nuts and bolt heads.
This information is provided as a guide to the use and application of CC-Couplings and is not or does not represent a specific warranty
of the product or its performance. The designer or user must determine the suitability of this product for a specific application.