Professional Documents
Culture Documents
REPEATER INTERFACE
RP-U1
Technical Specification
Connection Diagram
Cable Connection :
S. No. DB-15 Connector Signal Name Radio Side Pin no.
1 5 CARRIER DECTECT 8
2 6 GND 7
3 7 TX 2
4 8 PTT 3
5 9 PWR (+12V DC) 13
6 10 GND 7
7 11 GND 7
8 12 NC --
9 13 RX 11
10 14 SPK-IN 15
11 15 SPK-OUT 16
Caution: The 16 pin connector supplied with the equipment is non-polarized. Extreme
care must be taken before connecting to radio. Connector is marked as RADIOTOP/ RA-
Operation :
Program the radio as described in programming chart.
Connect the cable as described in cable Connection.
Power On the repeater unit
Select the LOCAL / REPEATER MODE Switch.
Select SPK ON/ SPK MUTE MODE switch. ( Not Use in GM-338/ GM-950 Radio )