Professional Documents
Culture Documents
Single Aisle Technical Training Manual M35 LINE MECHANICS (CFM 56) (LVL 2&3) General
Single Aisle Technical Training Manual M35 LINE MECHANICS (CFM 56) (LVL 2&3) General
GENERAL
Maintenance External Visit (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
UCC11021 - U2935T0
M35 LINE MECHANICS (CFM 56) (Lvl 2&3) TABLE OF CONTENTS Feb 01, 2011
GENERAL Page 1
Single Aisle TECHNICAL TRAINING MANUAL
NOTE: Note: The instructions for the checks that must be done are in
the FCOM.
The maintenance personnel usually does a full inspection before each
originating flight. If no maintenance personnel is available, a flight crew
member does the full inspection. The parking brake must be on during
the exterior inspection to let the flight crew do a check of the brake wear
indicators.
Do a check of the structure for impact damage.
Do a check for signs of fuel, oil or hydraulic leaks.
M35 LINE MECHANICS (CFM 56) (Lvl 2&3) MAINTENANCE EXTERNAL VISIT (2) Feb 01, 2011
GENERAL Page 2
Single Aisle TECHNICAL TRAINING MANUAL
UCC11021 - U2935T0 - UM01D4000000001
EXTERNAL VISIT
M35 LINE MECHANICS (CFM 56) (Lvl 2&3) MAINTENANCE EXTERNAL VISIT (2) Feb 01, 2011
GENERAL Page 3
AIRBUS S.A.S.
31707 BLAGNAC cedex, FRANCE
STM
REFERENCE UCC11021
FEBRUARY 2011
PRINTED IN FRANCE
AIRBUS S.A.S. 2011
ALL RIGHTS RESERVED
AN EADS COMPANY