Professional Documents
Culture Documents
INT-1
20/03/2020
Contents
1. Column Internals Summary----------------------------------------------------------------------------------------------------------------3
2. Feed/Draw Summary------------------------------------------------------------------------------------------------------------------------4
3. CS-1--------------------------------------------------------------------------------------------------------------------------------------------- 5
3.1. Tray Geometry----------------------------------------------------------------------------------------------------------------------------- 5
3.2. Design Parameters------------------------------------------------------------------------------------------------------------------------7
3.3. Results Summary--------------------------------------------------------------------------------------------------------------------------8
3.4. Hydraulic Plots----------------------------------------------------------------------------------------------------------------------------- 10
4. CS-2--------------------------------------------------------------------------------------------------------------------------------------------- 14
4.1. Tray Geometry----------------------------------------------------------------------------------------------------------------------------- 14
4.2. Design Parameters------------------------------------------------------------------------------------------------------------------------16
4.3. Results Summary--------------------------------------------------------------------------------------------------------------------------17
4.4. Hydraulic Plots----------------------------------------------------------------------------------------------------------------------------- 19
Hydraulic Analysis Report - B6 : INT-1
Number of sections 2
Number of diameters 2
Sections
Section Section
Column Start End Diameter Internals Tray or % Approach Limiting
Height Pressure
1 Stage Stage (meter) Type Packing Type to Flood Stage
(meter) Drop (bar)
Page 3 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
2. Feed/Draw Summary
Feed/Draw Summary
1 11 Draw
6 2 Feed
19 14 Draw
Page 4 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
3. CS-1
3.1. Tray Geometry
Section
Number of passes 1
Downcomer geometry
Weir geometry
Panels
Page 5 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Property A Unit
Page 6 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Page 7 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Number of passes 1
Limiting conditions
Maximum % downcomer
35,6485 5
backup (aerated)
Maximum downcomer
108,085 cum/hr/sqm 5 Side
loading
Maximum % downcomer
18,2511 5 Side
choke flood
Maximum % approach to
59,7241 5
system limit
Maximum Cs based on
0,108464 m/sec 5
bubbling area
Messages Summary
Page 8 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Messages
The diameter is 0,6353 meter. We recommend that this column and any column with a diameter less than 0,9144
meter be designed so as not to exceed 75% jet flood.
Page 9 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Page 10 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Page 11 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Page 12 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Page 13 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
4. CS-2
4.1. Tray Geometry
Section
Number of passes 1
Downcomer geometry
Weir geometry
Panels
Page 14 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Property A Unit
Page 15 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Page 16 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Number of passes 1
Limiting conditions
Maximum % downcomer
36,922 18
backup (aerated)
Maximum downcomer
252,985 cum/hr/sqm 18 Side
loading
Maximum % downcomer
42,9797 18 Side
choke flood
Maximum % approach to
57,8382 18
system limit
Maximum Cs based on
0,1048 m/sec 18
bubbling area
Messages Summary
Page 17 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Messages
The diameter is 0,7031 meter. We recommend that this column and any column with a diameter less than 0,9144
meter be designed so as not to exceed 75% jet flood.
Page 18 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Page 19 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Page 20 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Page 21 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Page 22 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Page 23 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Page 24 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Page 25 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Page 26 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Page 27 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Page 28 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Page 29 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Page 30 of 31 20/03/2020
Hydraulic Analysis Report - B6 : INT-1
Page 31 of 31 20/03/2020