Professional Documents
Culture Documents
MANIFOLD KIT
MANIFOLD Includes manifold, pressure relief valve, check valve, pressure gauge, tri-clamps, gaskets, tri-clamp to 2” MNPT adapter, manual
Materials Stainless Steel with EPDM Gaskets
Weight 40lbs
PUMP KIT
Includes pump, mounting flange, return pipe, gasket, O-rings, circlip, cover, spider, 5/8 stainless steel bolt/nut/washer kit, antiseize, manual
Application DEF (Diesel Exhaust Fluid/Diesel Emissions Fluid) per ISO22241 Standard
Device Characteristics Vertical Immersion Pressure Pump with Impellers
Model DEF640
In-tank Operating Temperature Range +23F to +104F (-5C to +40C)
Storage Temperature Range -22F to +122F (-30C to +50C)
PUMP Approvals ISO22241 for storage and dispensing of Diesel Exhaust Fluid
Dimensions 8’ Tank Standard 10’ Tank Standard
Flange Bottom to End of Pump = 95” Flange Bottom to End of Pump = 122”
Flange Bottom to Top of Motor = 30” Flange Bottom to Top of Motor = 30”
Overall Length = 125” Overall Length = 152”
DEF Pumping Solutions
DEF Pumping Solutions
16” Dia.
REQUIRED TANK INTERFACES
5/8” Bolt 10.0” Min.
hole min. opening
14.25” BC
30” Top of tank
flange
125” 8 Ft.
152” 10 Ft. TOP VIEW - PUMP IN SUMP
Customer supplied piping
from this point. Shut off
Access Chamber valve required in system.
95” 8 Ft. (48" Diameter Shown)
122” 10 Ft.
3” Tri-clamp
to 2” MNPT
(Supplied with
manifold)
37”
Minimum immersion in Tank flange
liquid to start pump RJ DEF pump mounting supplied with
4” >4” tank (24” dia.
flange fits 10” ANSI flange
profile(may be rotated 360° shown)
as allowed by bolt pattern) Pressure gauge
Tank bottom