Professional Documents
Culture Documents
AirGuard
Wheel Sensor, TPMS
This snap-in wheel sensor can be installed in copied from the "old" sensor to the new one,
both light alloy rims and steel rims and can be or can be reassigned. In addition, the wheel
activated wirelessly. Please note that the sensors can be rewritten, and can be used in
permissible maximum speed is restricted to aluminium and steel rims. The sensors can be
210 km/h. Supplied with a rubber valve. ordered individually and are supplied with a
Herth+Buss wheel sensors can be used in all complete valve. A replacement valve is also
vehicles that have a tyre pressure monitoring available.
system installed as standard. The AirGuard is < one for all: optimum stockage with just
required for programming and adjustment to one universal wheel sensor
the vehicle concerned. This process only takes < for steel or aluminium rims
between 5 and 15 seconds per sensor. An < certification up to 210 km/h
outstanding feature of the Herth+Buss wheel < battery service life: 3-7 years
sensors: the original serial/ID number can be
DU Article no.
1 70699434
Content Colour QU
Valve, TPMS 1 70699434013
AirGuard
Accessories see DU
Programming-/Diagnostic Unit, TPMS Katalog08 1 95990001
AirGuard
ELPARTS | JAKOPARTS