Professional Documents
Culture Documents
Jet - Lube Industrial Catalog PDF
Jet - Lube Industrial Catalog PDF
Industrial
Through 60 years of research, development, Table of Contents
testing and manufacturing, Jet-Lube has developed
Anti-Seizes 2
a broad line of grease products for Industrial,
EP Greases 6
MRO, Marine, Food Grade, and OEM applications:
Thread Sealants 11
Anti-Seize Compounds, EP Greases, Thread
Lubricants 14
Sealants, Lubricants, Anaerobics, Penetrants and
Anaerobics 16
General Purpose Lubes & Cleaners.
Coatings 18
Every Jet-Lube product is meticulously developed, Specialties 19
manufactured and inspected to the industrys Cleaners 21
most comprehensive and rigorous quality control
standards. Jet-Lube is proud to have been ISO
CertiÞed since 1993. With manufacturing plants
in Houston, Edmonton and the United Kingdom,
Jet-Lube has earned its place as a world-wide
leader in the lubrication industry.
as a master blender of grease products, by the ASTM for our research, test
and R&D lab, and the U.S. government for our Mil-Spec test capabilities.
its an OEM or MRO application, Jet-Lube has the right product for all of
The Jet-Lube, Inc. line of anti-seize compounds is a family of conÞguration that allows proper particle distribution
premium products developed to protect and lubricate metal necessary to plate on the surface of the threaded part
fasteners and parts from rust, corrosion, galling and metal under load. This plating action of components is a key
to metal contact. All of the Jet-Lube, Inc. anti-seize products factor for reaching proper torque loads and will aid in the
contain the highest percentage of copper, nickel or moly disassembly of the fastener without damage. This type
ßake, in an extreme temperature, chemical resistant, food of engineering and technology is what is behind all anti-seize
grade grease base. This exclusive grease base suspends all products manufactured by Jet-Lube, Inc. and is what sets
of the components for each type of anti-seize in a uniform Jet-Lube products apart from the competition.
ASTM A354 Quenched and tempered alloy steel bolts, studs, and other fasteners
ASTM A193/A193M Alloy steel and stainless steel bolting materials for high temp service
ASTM A320/A320M Alloy steel and stainless steel bolting materials for high temp service
ASTM F593 Stainless steel bolts, hex cap screws, and studs for general use
ASTM F468 Nonferrous bolts, hex cap screws, and studs for general use
ASTM F468 Stainless steel bolts, hex cap screws, and studs for general use
ASTM A194/194M Carbon & alloy steel nuts & bolts for high pressure and high temp service
ASTM F153 Zinc coating (hot dip) on iron and steel hardware
Kopr-KoteÆ SS-30
Anti-Seize and Thread Lubricant Anti-Seize Thread Lubricant and
-65°F to 1800°F (-54°C to 982°C) NSF Conductive Termination Compound
Registered (H-2) MIL PRF-907E Load -65°F to 1800°F (-54°C to 982°C) Clay Grease
Rating - 80,000 psi Friction CoefÞcient Thickener MIL-PRF 903E Load Rating - 80,000
(K-factor) - .15 10% pure metallic copper psi Friction CoefÞcient (K-Factor) - .13 30% Pure
ßake No VOC NSN #8030-01-239-8703 Copper Flake No VOC NSN #8030-00-180-
Not ClassiÞed as a Marine Pollutant DOT 6315 Conductive Rating - 8kv
approval CA2004080025 SS-30 is 30% high purity/reÞned copper ßake, mixed
KOPR-KOTE is a combination of copper ßake, in a high temp non-melt base grease formula that
graphite and other extreme pressure additives, not only aids in conductivity, but will work ideally as
blended into a food grade grease base that helps properly distribute all the an anti-seize compound for threaded fasteners and cable connections.
components on the surface of the fastener or the metal surface needing SS-30 literally copper plates mated surfaces to improve conductivity or
lubrication. This particle distribution is necessary to achieve the .15 ground continuity. The same is true for threaded fasteners. The highly
K-Factor and aids in the break out process by reducing metal to metal concentrated copper ßake works as a copper plating material under load or
contact that can cause friction, heat and damage to the threaded surface. compression to work as a dissimilar metal between surfaces, which is a key
factor for an anti-seize compound to perform properly.
10061 6 oz. Squeeze Tube, 10055 1/4 lb. Brush Top,
10002 1/2 lb. Brush Top, 10004 1 lb. Brush Top, 10007 2 lbs. Brush Top, 12555 1/4 lb. Brush Top, 12502 1/2 lb. Brush Top, 12504 1 lb. Brush Top,
10041 12 oz. Aerosol, 10050 14 oz. Cartridge, 10091 1 gal., 12507 2 lbs. Brush Top, 12523 10 lbs. (1 gal.), 12513 25 lbs. (2.5 gal.),
10092 2.5 gal., 10093 5 gal. 12515 50 lbs. (5 gal.), 12524 150 lbs. (15 gal.), 12529 500 lbs. (50 gal.)
-65°F to 2400°F (-54°C to 1316°C) MIL-PRF 907E -65°F to 2400°F (-54°C to 1316°C) MIL-PRF
Load Rating - 50,000 psi Friction CoefÞcient 907E Load Rating - 50,000 psi Friction
(K-Factor) - 0.17 Highly Concentrated Blend of CoefÞcient (K-Factor) - 0.17 Highly
Molybdenum DisulÞde & Graphite No VOC Concentrated Blend of Molybdenum DisulÞde
& Graphite No VOC
550 Æ blend of molybdenum disulÞde and graphite in
a high temp grease carrier, makes this multi-purpose 550 Æ EXTREMEÆ ANTI-SEIZE COMPOUND
extreme pressure anti-seize lubricant especially is an enhanced formulation of our 550 Æ product.
effective under high loads and pressures up to 50,000 psi. This unique 550 Æ EXTREMEÆ is the ideal product for petrochemical plant maintenance
blend of inert materials makes 550 compatible with all materials where needs. Its homogeneous composition offers maximum protections against
nickel & copper have compatibility related issues. Low coefÞcient of friction seizure and heat freeze, eases assembling and dismantling, and saves man
makes 550 a good choice for rough cut threads made of cast iron, black hours. It assures protection against rust, oxidation, and corrosion. It will not
steel and specially suited for high nickel alloys as a thread lubricant. harden, evaporate, or settle out; and it requires no thinning. In addition to
molybdenum disulÞde (MoS2), graphite, and low friction Þllers, 550 Æ
15555 1/4 lb. Brush Top, 15502 1/2 lb. Brush Top, 15504 1 lb. Brush Top,
EXTREMEÆ utilizes a new generation complex base grease that is fortiÞed
15507 2 lbs. Plug Top, 15523 10 lbs. (1 gal.), 15513 25 lbs. (2.5 gal.),
with effective rust and corrosion inhibitors and inherent anti-wear
15515 50 lbs. (5 gal.), 15524 150 lbs. (15 gal.), 15529 500 lbs. (50 gal.)
properties. As an added beneÞ t of 550 Æ EXTREMEÆÆ when compared to
other Anti-Seize compounds containing greater than 40% molybdenum
NikalÆ disulÞde is the coefÞcient friction of 550 Æ EXTREMEÆ is less sensitive to
Pure-Nickel Extreme Temp temperature.
Anti-Seize
and Thread Lubricant 47161 6 oz. Squeeze Tube, 47102 ½ lb. Brush Top, 47104 1 lb. Brush Top
-65°F to 2600°F (-54°C to 1427°C)
MIL-PRF 903E Load Rating - <100,000 psi NikalÆ Nuclear Grade
Friction CoefÞcient (K-Factor) - .15 20% Pure-Nickel Extreme Temp Anti-Seize
Pure Nickel Flake No VOC and Thread Lubricant
-65°F to 2600°F (-54°C to 1427°C) Synthetic
NIKAL, a Graphite Free, Pure-Nickel formula,
Grease Thickener MIL-PRF 907E Load Rating -
is an inert anti-seize specially formulated where
<100,000 psi Friction CoefÞcient (K-Factor) - .15
ammonia acetylene or vinyl monomers are present. NIKAL will not
20% Pure Nickel Flake No VOC
contaminate catalyst beds. This blend contains ßake particles of pure Nickel
and other additives blended in a high temp complex grease carrier found NIKAL-NUCLEAR is specially tested and certiÞed
to enhance anti-seize performance. This formula is recommended for use pure for use in nuclear power plants and for
when applications prohibit the use of copper products. applications where a class 1, 2 or 3 non-wetted
application for auxiliary equipment in nuclear and fossil power plants is
13661 6 oz. Squeeze Tube, 13655 1/4 lb. Brush Top,
required. CertiÞed test results are provided with each production lot of
13602 1/2 lb. Brush Top, 13604 1 lb. Brush Top,
product. Each lot is tested for contaminants of sulfur, halogens and
13623 8 lbs. (1 gal.), 13613 20 lbs. (2.5 gal.), 13615 40 lbs. (5 gal.),
low-melt components, which is required by NRC.
13624 120 lbs. (15 gal.), 13629 400 lbs. (50 gal.)
13555 1/4 lb. Brush Top, 13502 1/2 lb. Brush Top, 13504 1 lb. Brush Top
Nuclear-Nonmetallic
Nonmetallic Anti-Seize Silver Plus Regular
and Thread Lubricant Regular Grade Anti-Seize
-65°F to 2400°F (-54°C to 1316°C) MIL-PRF 907E and Thread Lubricant
Load Rating - >100,000 psi Friction CoefÞcient -65°F to 1800°F (-54°C to 982°C) MIL-PRF 907E
(K-Factor) - 60,000 psi No Metallic Content Friction CoefÞcient (K-Factor) - .15 15% Pure
No VOC Metallic Content (Copper & Aluminum) No VOC
NUCLEAR NONMETALLIC is a specially SILVER PLUS REGULAR is a Heavy Duty Blend
formulated version of the traditional Nickel Grade of aluminum, copper and graphite lubricants in a
Nuclear material that will not contaminate reactor petroleum grease base. It is a non-drying, soft-set
catalysts beds or cause galling on reactor rod ends. Each production lot anti-seize, specially formulated to work with
has certiÞed test results provided for material traceability and for purity. aluminum, carbon steel, black iron and rough cut threads. SILVER PLUS
Formulated for all 1, 2 and 3 non-wetted applications found in nuclear REGULAR protects metal parts from rust corrosion, seizing and galling up
power plants and fossil fuel plants. This formulation is engineered for high to 1800°F (982°C). The micro-sized particles produce a smooth
nickel alloys, carbon steel fasteners and is nonconductive. consistency and allow it to quickly coat Þne threads and small and large
diameter fasteners. The metallic components make it very conductive and,
14902 1/2 lb. Brush Top, 14904 1 lb. Brush Top
because the primary anti-seize particle is aluminum, it eliminates the
potential for galvanic corrosion.
69902 1/2 lb. Brush Top, 69904 1 lb. Brush Top, 69923 8 lbs. (1 gal.),
69916 40 lbs. (5 gal.)
Kopr-Kote Exceeds -65°F to 1800°F 0.15 H-2 A307, A354, Ideal for high temp, stress and load
MIL-PRF-907E -54°C to 982°C A193/A193M, applications. Not recommneded for
A320/A320M, aluminum Þttings and fasteners
AF468, A563, F467
550 Exceeds -65°F to 2400°F 0.17 A307, A449, General purpose water resistant
MIL-PRF-907E -54°C to 1316°C A193/A193M, lubricant for use on steel,
A320/A320M, aluminum & cast iron
F593, Ax563,
A194/A194M,
F594, F467,
A153, B690, B696
550 Extreme Exceeds -65°F to 2400°F 0.17 A307, A449, Enhanced formulation of 550 to
MIL-PRF-907E -54°C to 1316°C A193/A193M, better enable assembly and
A320/A320M, dismantling of threaded connections.
F593, Ax563, General purpose water resistant
A194/A194M, lubricant for use on steel, aluminum
F594, F467, & cast iron.
A153, B690, B696
SS-30 Exceeds -65°F to 1800°F 0.13 A307, A354, Designed for stainless steel
MIL-PRF-907E -54°C to 982°C A193/A193M, applications in high temp
A320/A320M, environments (above 500°F)
F468, A563, F467
Silver Plus Exceeds -65°F to 1800°F 0.08 A307, A354, Micro-sized particles allow it to
MIL-PRF-907E -54°C to 982°C A193/A193M, quickly and easily coat Þne-
A320/A320M, threaded, small & large diameter
F468, A563, F467 fasteners
ECF -65°F to 2600°F 0.15 Superior adhesion to wet steel
-54°C to 1427°C surfaces and resistant to water
wash off
Nikal Exceeds -65°F to 2600°F .15 A193/A193M, Used whenever ammonia, acetylene
MIL-PRF-907E -54°C to 1427°C A563, A194/A194M, or vinyl molomers are present.
B633, A153, B696 Will not contaminate catalyst beds
Nikal -65°F to 2600°F .15 Specially tested and certiÞed
Nuclear -54°C to 1427°C pure for nuclear power plants.
CertiÞed test results are
provided with each production
lot of product.
Nuclear Exceeds -65°F to 2400°F 0.17 Nonmetallic formula. Specially
Nonmetallic MIL-PRF-907E -54°C to 1316°C certiÞed pure for nuclear power
plants. CertiÞed test results are
provided with each production
lot of product.
Moly -65°F to 800°F 0.18 Contains MoS2 for high-temp
Petrolatum -54°C to 427°C applications
Graphite AMS-2518 -65°F to 900°F 0.13 Particularly suitable for contact with
Petrolatum (Formerly -54°C to 482°C austenitic steels, titanium, nickel &
MIL-T-5544C) cobalt alloys, and similar corrosion-
resistant metals & alloys
Zinc Dust MIL-T-22361 -65°F to 800°F 0.13 Prevents seizing of threaded
Petrolatum -54°C to 427°C components made from
aluminum and its alloys
White MIL-PRF-907 -65°F to 1800°F 0.15 H1 Ideal for incident food contact
Knight FDA CFR21, -54°C to 982°C NSF applications
Part 178.3570 61
Marine Grade -65°F to 1800°F 0.15 Yes Extra protection in extreme and
Anti-Seize -54°C to 982°C adverse marine conditions
Lithium
Jet-Plex-EP
Premium Multipurpose Grease
0°F to 425°F (-18°C to 232°C) Will not run or pound out Pumpable hot or cold Extremely resistant to rust and oxidation Color - Red
Available in NLGI 1 and NLGI 2 grades
JET-PLEX-EP is the ideal multipurpose grease for use in extreme pressure and high temperature operating conditions. JET-PLEX-EP is manufac-
tured from carefully selected petroleum oils and lithium complex soap to create a multipurpose grease with a dropping point of 550°F (288°C).
JET-PLEX-EP has excellent resistance to water and water washout. JET-PLEX-EP is formulated with special lubricity, anti-wear, and extreme
pressure additives and fortiÞed with rust, corrosion and oxidation inhibitors.
JET-PLEX-EP is recommended for all types of bearing and sliding applications, for shock-loading, pounding, rough chassis usage and high loads.
31750 14 oz. Cartridge, 31705 1 lb. Can, 31706 5 lbs. Can, 31716 35 lbs. (5 gal.), 31724 120 lbs. (15 gal.), 31729 400 lbs. (50 gal.)
Aluminum Complex
FMG
Food Machinery Grease
0°F (-18°C) to over 400°F (204°C) NSF rated H1 Non-pound out formula Bacteriostatic Agent Anti-wear additives Color
or White
FMG is speciÞcally designed for use in the food processing industry where it may have incidental food contact. FMG has been formulated
ulated to
perform in a wide variety of operating conditions. It is extremely water resistant and will remain in place even after frequent wash downs.
Polymer additives provide adhesive/cohesive strength to protect against pound-off when shock loads are encountered. For slower speeds,
higher loads or greater adhesion and water resistance, FMG is also available in an ISO 460 grade.
FMG is recommended for the lubrication of roller, needle, ball, journal, and sliding bearings in the food processing and handling industry.
ustry.
30150 14 oz. Cartridge, 30116 35 lbs. (5 gal.), 30124 120 lbs. (15 gal.), 30129 400 lbs. (50 gal.)
EP Greases
Product Type Color Temp SpeciÞcations NLGI Grade Marine NSF Features
Arctic Temp-Guard
Extreme Cold Temperature Grease High-Temp Grease
-65°F to 225°F (-54°C to 107°C) Dropping point of 285°F -10°F to 600°F (-23°C to 316°C) No petroleum based oils or
(141°C) Contains no solid additives Extremely resistant to salt additives High ßash point Excellent low temperature
spray All temperature formula; effective winter or summer properties Non-melting High Þlm strength with low coefÞcient
Water resistant Rust and corrosion resistant Color - Amber of friction Low volatility for less smoke and odors Color - Black
ARCTIC is particularly suitable for use in extreme cold TEMP-GUARD is a high quality synthetic grease for high
environments such as cold rooms, cold storage lockers, ice plants, temperature applications. It contains both graphite and molybde-
and on refrigeration or cold storage equipment. It will resist such num disulÞde to give the product both low friction and extreme
environmental contact as humidity, ice, and road salts without pressure capabilities. The synthetic ßuid in this product provides
hardening, washing off or deteriorating. exceptional low temperature ßow characteristics as well as high
temperature stability. There are no polymers to build viscosity or
ARCTIC is an excellent service grease that has passed the Shell Roll Test
viscosity index. TEMP-GUARD is ideal for plain and anti-friction ball and
for 100 hours at 150°F (66°C), and passed Federal Test Method Standard
roller bearings, kiln bearings, crushers, crane ladles, press and hammer
No. 791B, Method No. 3454.2 Leakage Tendencies of Automotive Wheel
guides, high temperature blowers, fans and oven conveyors.
Bearing Greases and ASTM 1263. It also passes the application salt-spray
resistance and rust tests required by the United States Government for its 31850 14 oz. Cartridge, 31805 1 lb. Can, 31806 5 lbs. Can,
severe environmental contact greases. 31816 35 lbs. (5 gal.), 31824 120 lbs. (15 gal.)
ARCTIC may be used on automobiles and aircraft, in industrial applica-
tions, or anywhere lubricating properties of a moderate to severe nature
are required over a wide range of temperatures.
35050 14 oz. Cartridge, 35005 1 lb. Can, 35006 5 lbs. Can,
35016 35 lbs. (5 gal.), 35024 120 lbs. (15 gal.), 35029 400 lbs. (50 gal.)
Thread Sealants
Thread Sealants
Product SpeciÞcations Temp Pressure NSF Features
V-2 MIL-TT-S-1732 -70°F to 500°F 10,000 psi liquid P1 Vegetable oil-based, soft-setting,
(formerly MIL-T-27730A) -57°C to 260°C 2,000 psi gases NSF-61 for use with potable water
TFW MIL-TT-S-1732 -35°F to 500°F 10,000 psi liquid Ideal for high-pressure applications
-37°C to 260°C 2,000 psi gases
TF-15 CA COR Title 22 -50°F to 600°F 10,000 psi liquid Ideal for Þberglass pipe applications
-46°C to 316°C
TF-25 -100°F to 600°F 10,000 psi liquid Ideal for pipe diameters larger than 3 inches
-73°C to 316°C
Petro Tape CID A-A-58092 -400°F to 500°F 2 mil thicker than average tapes
(formerly MIL-T-27730A) -240°C to 260°C One wrap application
PFPE Grease 0°F to 600°F 1,500 psi liquid Unmatched chemical & solvent resistance
-18C to 260°C
Jet-Lube Thread Sealants are manufactured to seal vibration loosening, solvent evaporation, damaged
and secure metal, plastic and Þberglass piping and threads and temperature cycling. All sealants are
Þttings by Þlling the voids and imperfections on the specially manufactured to meet plumbing codes
threaded surfaces and to eliminate back ßow for use in natural gas applications, Þre sprinkler
through the threads, thus causing a leak pattern. system installations and general purpose applica-
Jet-Lube thread sealants prevent leakage caused by tions for threaded plastic pipe.
V-2Æ TFW
Multipurpose Pipe Thread Sealant PTFE Fire Sprinkler, Pressurized Air and
with PTFE Natural Gas Pipe Thread Sealant
-70°F to 500°F (-57°C to 260°C) NSF - 61 -70°F to 500°F (-57°C to 260°C) Biodegradable
#21265 Uniform Plumbing Code: IAPMO #1282 Non-Melt Contains PTFE No VOC Brushable
Biodegradable MIL TT-S-1732 No VOC Seals to 0°F 10,000 psi Rating (Liquids) MIL-TT-S-1732
to 10,000 psi Friction Factor - .07 Brushable to Friction Factor - .07
0°F Contains PTFE Safe to use on PVC &
TFW is manufactured to seal NPT threads for metal
Fiberglass Fittings No Odor
piping, threaded ball valves and for applications
V-2 is a combination of vegetable oil, PTFE and inert where PVC, CPVC and ABS are used. This special
Þllers that are environmentally safe, nontoxic for use in potable water appli- formula is ideal for Þre sprinkler applications where glycol testing
cations, on NPT and standard pipe Þ ttings. V-2 is a soft setting product, so is required. Provides sealing upon application and can be pressurized to
you can remove the Þ tting without damage to the threads. 10,000 psi for liquids and 2,000 psi for natural gas and pressurized air lines.
This formulation also has rust and corrosion inhibitors built in so the The soft setting formula is ideal where disassembly of Þ ttings is required.
connection/Þ tting will not rust or corrode. V-2 also has a bacteria/fungistat The rust and corrosion inhibitors are built in to assure trouble free
which is a food grade additive that will eliminate bacterial culturing. disassembly and help eliminate damage to the threaded Þ tting. The formula
35555 1/4 pt. Brush Top, 35502 1/2 pt. Brush Top, is built around micro-Þne particles which allow Þ ttings and valves to be
35504 1 pt. Brush Top, 35507 1 qt. Brush Top, 35523 1 gal., assembled with ease, and ensures immediate seal and pressurization.
35515 5 gal., 35524 15 gal., 35529 500 lbs. (50 gal.) 24055 1/4 pt. Brush Top, 24002 1/2 pt. Brush Top,
24004 1 pt. Brush Top, 24007 1 qt. Brush Top, 24023 1 gal.,
TF-25 24015 5 gal., 24024 15 gal., 24029 50 gal.
Line Pipe and NPT Thread Sealant and
Anti-Seize TF-15Æ
-100°F to 600°F (-73°F to 316°C) Contains PTFE Fiberglass Pipe Thread Sealant
& Graphite Brushable to 0°F Soft Setting -60°F to 600°F (-51°C to 316°C) Non-Metallic
Formula Non-Melt Formula Chemically Inert No VOC Contains PTFE & Graphite H2S
Pressures to 10,000 psi liquid and 2,000 psi natural Additive Pressures to 10,000 psi Liquid and
gas & air Friction Factor - .07 2,000 psi Natural Gas & Pressurized Air
TF-25 is a thread sealant that has anti-seize Frictions Factor - 0.7
characteristics, where standard thread sealants do TF-15 assures a tight connection assembly to
not have the ability to handle dual function applications. TF-25 performs better handle pressure surges, vibration,
both functions of sealing the threads on large diameter connections (3 1/2 temperature ßuctuations and pressures up to 10,000 psi. The highly reÞned
and above), while also working as an assembly and disassembly lubricant. materials used for this formula do not interfere with connection assembly,
The ingredients are inert, noncorrosive, and ideal for natural gas, hot oils, thus allowing full thread engagement which creates the actual seal in the
desolate materials and wastewater applications. TF-25 is ideal as a thread thread form. Fiberglass threaded pipe is a rough cut thread which requires
sealant where loose Þ tting or worn threads are present, on imperfectly cut a sealant to lubricate the threaded surface and seal at the same time.
threads or where thread damages have occurred. TF-25 may be used on Creating a tight seal is important to eliminate back ßow of the contents
both ferrous and nonferrous metals. traveling through the pipe. Some of the typical uses for Þberglass pipe are
23502 1/2 lb. Brush Top, 23504 1 lb. Brush Top, 23507 2 lbs. Plug Top, salt water discharge applications, wastewater plants, power generation
23523 10 lbs. (1 gal.), 23513 25 lbs. (2.5 gal.), 23515 50 lbs. (5 gal.) stations and for highly corrosive materials which would corrode metal piping.
23023 1 gal., 23012 2 gal., 23015 5 gal., 23024 15 gal.,
23029 50 gal.
Petro-Tape
Heavy-Duty Thread Sealant Tape
-400°F to 500°F (-240°C to 260°C) 3-Mil
Thickness Conforms to CID A-A-58092
(MIL-T-27730A) Inert Properties Chemical
Resistant Pure Virgin Polytetraßuoroethylene
PETRO-TAPE is inert and highly resistant and
impervious to salt water, fuels, refrigerants, acids and alkalis, including
kerosene, cleaning ßuids and gases. Immediate pressurization of the joint is
possible. This 3-Mil tape will not tear easily, as the combination of polymers
actually stretch and expand to develop a tight seal. When the NPT Þ tting is
assembled to the pipe, the Petro-Tape will not tear or ball up in the threads
during assembly which can cause leak patterns to develop.
30774 ½ x 500
Gear-Guard Sheen-Free
Premium Lubricant Paste Non-Sheening Wire Rope Coating
0°F to 550°F (-18°C to 288°C) Biodegradable Nonhazardous Pumpable
Brushable/Pumpable formula Black, Flexible Þnish No evaporation
Sticky Semi-Fluid Petroleum Oil Penetrates to wire rope core to provide inner-
Based Material strand lubricity. SHEEN-FREE displaces water while
This product has been developed to coat coating scratches and nicks. Forms an outer Þlm to
and protect mating surfaces of opened protect against salt water corrosion and wash off.
and closed crown ring and pinion gears. This product is designed for applications when
Also used for bull gears, planetary ring gears and assemblies where high docking or mooring where wire ropes will be in contact with sea water.
load contact protection is required. GEAR-GUARD contains molybdenum SHEEN-FREE is biodegradable, nonhazardous, water resistant, and contains
disulÞde and graphite in a water resistance grease base so the product will light oil type products that will not sheen on the surface of sea water.
not run, sling off or melt over time and exposure to the elements. This SHEEN-FREE is a ßexible coating for both working and storage of cables
combination of durable and ßexible components produces a thin Þlm on and wire rope. SHEEN-FREE is a thin Þlm oil for coating spools for storage
the gears, eliminating metal to metal contact which will reduce surface heat or transport. Water will not penetrate the coating and remains ßexible for
and wear. working applications. Conforms to US Coast Guard speciÞcation 9150-01-
17941 12 oz. Aerosol, 17909 9 lbs. (1 gal.), 17916 35 lbs. (5 gal.) 398-7341 for lubrication properties. SHEEN-FREE is a direct offset to
Prelube 19 wire rope lubricant and coating.
WLD (Wire Line 33720 5 gal.
Dressing)
Wire Rope, Cable and Roller WRL (Wire Rope
Chain Dressing & Lubricant
Non-Melt Base Grease -25°F to 350°F
Lubrication/Oil)
Wire Rope and Chain Lubricant
(-32°C to 177°C) Black Brushable -25°F to 350°F (-32°C to 177°C)
Formula NSN # 9150-01-179-0228 Petroleum Oil Color - Beige Solvent
WLD is a blend of petroleum and Free Pumpable
organic resins that aid in adhesion All wire ropes contain numerous moving
properties and make WLD highly water resistant. This formula is a coating parts that require lubrication. Each time
for long-term storage to protect exposed wire rope. Ideally suited for the rope bends or ßexes, the internal
spooling applications where pneumatic lubricators are present for applying strands rub together causing friction,
wire rope lubricants. Our special blend of rust and corrosion inhibitors will heat and wear. WRL has a blend of additives that coat, cover and protect
eliminate oxidation and is UV protected. WLD will not run or drip off the strands from the weathering conditions caused by offshore environ-
during transport or storage. The barrier Þlm of WLD protects against the ments. Highly resistant to rain and salt water atmospheres, ideally suited
formation of rust and prevents rust binding which reduces cable ßexibility for offshore cranes and lashing lines. The formula of rust and corrosion
and life, increasing friction and wear. WLD is well suited for walking drag additives make this ideal for lubricating wire rope, forklifts and any
line applications and as a lubricant for wire line guides and sheaves. WLD application that needs lubrication without attracting dirt and grime. WRL
has the ability to penetrate in a working environment to protect the inner can also be used for cable pull systems and lines on amusement park rides.
core strands of the cable or rope.
34041 12 oz. Aerosol, 34010 7 lbs. (1 gal.),
28541 12 oz. Aerosol, 28510 7 lbs. (1 gal.), 28516 35 lbs. (5 gal.), 34020 35 lbs. (5 gal.), 34024 110 lbs. (15 gal.),
28524 120 lbs. (15 gal.), 28529 400 lbs. (50 gal.) 34029 375 lbs. (50 gal.)
Lubricants
Product Temp NLGI Color NSF Marine Features
Gear-Guard -25°F to 350°F 3 Black, Paste Ideal for all heavily loaded applications
-32°C to 177°C
OG-H 0°F to 550°F 3 Black, Paste Highly adhesive and easy to apply
-18°C to 288°C
WLD -25°F to 350°F Black, Paste Yes Ideal for use in salt water environments
-32°C to 177°C
WRL -25°F to 350°F Amber Yes Provides a non-drying, non-tacky Þlm
-32°C to 177°C
MP-50 -300°F to 750°F 3.5 Blue to Black Plates metal surfaces
-184°C to 399°C
Oven Chain -25°F to 350°F White NSF-61 Yes A premium, effective, high-viscosity lubricant
Lubricant -32°C to 177°C
Marine Moly -300°F to 750°F Black, Paste Yes Extremely resistant to weather conditions
-184°C to 399°C
Jet-Lube -30°F to 400°F Black Yes USCG Spec. Number 9150-01-398-7341
Sheen-Free -34°C to 204°C
TL-22 TL-72
Removable Screwlock High-Temp Studlock
Purple MIL-S-46163A Type II, Grade M Up to 450°F (232°C) Red MIL-S-46163A
Vibration-proof, low-removal torque compound for Permanent threadlocker/sealant resistant to extreme
small fasteners less than ¼ (6.35mm.) requiring future temperatures. Gap Þlling formulation for large diameter,
adjustment or removal. coarse-threaded parts. For use on furnace mounting
bolts, steel mill conveyor bolts, and kiln & oven bolts.
55666 50 ml., 55667 250 ml.
55566 50 ml., 55567 250 ml.
TL-77 TL-90
Heavy Duty Permanent Threadlocker Wicking Adhesive & Sealant
Red MIL-S-46163A Type I, Grade L MIL-S-22473E Green MIL-S-46163A Type III, Grade R MIL-S-22473E
Type I, Grade AVV Type III, Grade AA
High-strength, high-viscosity, permanent threadlocker/ Low viscosity, penetrating adhesive/sealant. This
sealant for fasteners over 1 (25mm.) in diameter. Ideal compound can penetrate the smallest voids in assembled
for large coarse-threaded studs, large gap or sloppy Þtting components. Once cured in place, a positive lock is
parts. formed helping to prevent leakage. Ideal for pillow block
bearings and bearing races.
55366 50 ml., 55367 250 ml.
55466 50 ml., 55467 250 ml.
RT-80 HP-45
Maximum Strength Retainer Hydraulic and Pneumatic High-Pressure
MIL-S-56050C Type II, Class 2 Sealant
HP-45 is a fast curing anaerobic sealant for hydraulic and
High viscosity, single component anaerobic resin
pneumatic Þ ttings up to 2 (51mm.) in diameter. Resists
designed for bonding rigid assemblies of all types. RT-80
water, most solvents, vibration loosening and pressures
is excellent for locking bearings, keys and splines.
to 10,000 psi.
Eliminates spin out and backlash.
57966 50 ml.
56266 50 ml.
TL-42 TL-71
Removable Nutlock Permanent Studlock
Blue MIL-S-46163A Type II, Grade N MIL-S-22473E Red MIL-S-46163A Type I, Grade K
Type II, Grade CVV Chemically resistant, permanent threadlocker/sealant.
Medium-strength general purpose threadlocker which, For use on bolts and studs up to 1 (25mm.) in diameter.
after curing, is removable with hand tools. Typical uses Resists fuels, lubricants, and most industrial liquids and
include coupling drive bolts, motor mounting bolts, gases to prevent leakage and corrosion.
construction equipment nuts and conveyor roller nuts. 55260 Fish Bowl with 100 2 oz. Bullets,
55160 Fish Bowl with 100 2 oz. Bullets, 55261 100 2 oz. Bullets without Fish Bowl,
55161 100 2 oz. Bullets without Fish Bowl, 55263 35 ml. Gel Pump, 55265 10 ml.,
55163 35 ml. Gel Pump, 55165 10 ml., 55266 50 ml., 55267 250 ml.
55166 50 ml., 55167 250 ml.
Anaerobics
Product HP-45 PS-67 PS-92
ALL PURPOSE LUBRICANT is the ideal product to be used COLD GALVANIZING COMPOUND is ideally suited for use on
on bearings, machinery, connectors, nuts and bolts, and all metal surfaces. structural steel, guard rails, galvanized surfaces, welded joints, offshore
equipment, and anywhere that a rust inhibiting coating is required.
50441 13 oz. Aerosol
51141 14 oz. Aerosol
Renew Moly-Mist
Belt Dressing MoS2 Dry Film Lubricant
NSF P1 Prevents Slippage Stops Squeaks, Squeals Extends Noncorrosive Bonds to Most Porous & Nonporous Metals
Belt Life Resists Water Wash-Off Increases Power -300°F to 750°F (-184°C to 399°C)
USDA/FDA Authorized
MOLY-MIST lowers friction, prevents galling, seizure, stickslip,
RENEW was developed to meet the demands of todays fretting, corrosion and metal-to-metal contact; reduces torque
industrial grade belt usage. RENEW eliminates problem belt and power consumption. It can be applied while equipment is
slippage on all round, ßat and V power transmission belts, in motion, deposits a coating of MoS2 on hard to reach
auto fan belts and all industrial and farm machinery belt drives. surfaces of Þxed, moving or irregular parts. MOLY-MIST is
RENEWs dry, tacky Þlm increases traction while permitting used wherever a dry lubricant is needed, particularly where
decreased belt tension for longer belt life. Can increase power up to 50%. temperatures are extreme, where environments are hostile,
RENEW is resistant to water wash-off and performs effectively under wet and where friction must be kept to a minimum.
conditions. RENEW removes residual build-up and will not glaze or collect MOLY-MIST provides the initial lubrication protection that is needed
dirt and dust. May be applied while belts are in operation. where conventional lubrication in most cases cannot. Its low coefÞcient of
50941 12 oz. Aerosol friction, bonding tenacity, and ability to sustain lubrication make MOLY-
MIST a pre-assembly necessity. Lubrication or lack of lubrication on the
Þrst pass or revolution of a wearing surface to a large extent determines
Rubber Lubricant the life of a component. New parts contain rough surfaces in the form of
Water-Based Rubber Lubricant & Mold microscopic imperfections. Use of MOLY-MIST during initial running in
Release Agent period will provide extended service life.
Nontoxic Low Foaming Odorless Heat Stable to
500°F (260°C) Environmentally Safe Nonstaining 16041 12 oz. Aerosol, 16015 35 lbs. (5 gal. Pail),
Nonßammable Ozone Friendly 16025 110 lbs. (15 gal. Drum), 16029 380 lbs. (50 gal. Drum)
19
Specialties
20
Cleaners
Clean-Up PS Terminal
Industrial Cleaner & Safety CFC-Free Electrical Contact Cleaner
Solvent 95% Free of Federal VOC Safe on plastics* Nonßammable
NSF Rated K1 Non-ßammable Ozone Nonstaining Residue Free Odorless May be used while
Friendly Acid, Alkali Free Low Odor equipment is operating >35kv Dielectric Strength NSF
>29KV Dielectric Strength Registered K2
CLEAN-UP is a heavy-duty, low-foaming, Formulated with a blend of HCFC and HFC solvents and
chlorinated solvent that rapidly dissolves propellants to safely and quickly clean electrical and electronic
oil, grease, paint, tar and grime on contact, components and equipment, while providing reduced damage to
leaving a clean, residue free surface. Will the environment as compared to CFCs and other HCFC-based
not corrode or damage metal. CLEAN-UP products. PS TERMINAL will penetrate and remove dirt, grease
is ideal for bearings, machinery, injectors, and organic contaminants and then evaporate leaving a residue-free
engine parts, tools, cables and more. surface. The blend of HCFCs and HFCs provides a Kauri-Butanol (KB)
61542 18 oz. Aerosol, 61533 1 gal., 61535 5 gal. value low enough to be safe in nearly every electrical and circuit board
application while still providing excellent cleaning and oxidation removal
Clean-Up II properties
Industrial Cleaner & Safety Solvent *Although much safer, this product may etch, discolor or crack the
Low VOC Formula Compliant in all 50 states Residue free following plastics; ABS, Polystyrene, Pebax 2533 Resin, and Polymethyl
Ozone friendly Methacry (Acrylic Resin). Test in an inconspicuous area before using.
CLEAN-UP II is a specially formulated low VOC blend of organic 60242 14 oz. Aerosol
solvents designed to quickly dissolve and rinse away dirt, grease,
grime, oil, tar and wax while being both environmentally Easy-CleanÆ Liquid
responsible and ozone friendly. The product contains no Alkaline-Based Concentrate
chlorinated or ßuorinated solvents, no hazardous air pollutants Biodegradable Nontoxic Nonßammable
and evaporates residue-free quickly. This product is California Noncombustible Nonfuming Water Soluble
compliant and acceptable for use in CARB/OTC States.
An alkaline-based cleaner/degreaser that uniquely
CLEAN-UP II starts working immediately on contact, breaking down and combines cleaning agents with newly developed
dissolving even stubborn contaminants without the use of ßuorinated, emulsifying technology to provide a product that
chlorinated or SARA listed ingredients. Safe on all metals and some can effectively remove carbon, grease, oil and other
plastics. For sensitive materials, test on an inconspicuous small area Þrst to organic deposits while being both safe and ozone
determine acceptability. For electrical services the system must be off and friendly. Contains no 1:1:1 Trichloroethane,
time given to evaporate before re-energizing the system to avoid ßash Fluorocarbons or SARA Title III, Section 313, Part
or Þre. 372 listed ingredients and contains no acids, chlorides, phosphates or
61442 14oz Aerosol, 61435 5 gal., 61429 50 gal. TTOs (Total Toxic Organic Compounds). EASY-CLEAN LIQUID is the
most effective cleaner/degreaser for heavy-duty industrial services available
Clean-Up Plus and can be used for parts degreasing, pressure washing, steam cleaning,
Citrus Degreaser ultrasound cleaning, or simply by brushing or spraying and then rinsing with
NSF Rated C1 Replaces 1:1:1 Trichloro- water or wiping clean. For best results, combine 5-gal. pail of EASY-
ethane Nonßammable Propellant CLEAN LIQUID with water in
Natural Organic Formula Ozone a 55-gal. drum.
Friendly Biodegradable 29KV 30033 1 gal., 30035 40 lbs. (5 gal.), 30029 400 lbs. (50 gal.)
Dielectric Strength
High performance blend of safe, organic Jet-Lube 5000
solvents quickly dissolves and rinses away Water-Based Cleaner
dirt, grease, grime, oil, tar, and wax, while & Degreaser
being both environmentally safe and NSF Rated A1, B2 & C1 Ph 7-8
ozone friendly. Works immediately on contact, breaking down and Biodegradable Nontoxic Noncor-
dissolving even the most stubborn contaminants without the use of rosive Nonßammable Nonfuming
ßuorinated, chlorinated or SARA listed ingredients. Slowly evaporates Contains no 1:1:1 Trichloroethane,
while cleaning, leaving a residue free surface. CLEAN-UP PLUS is safe on ßuorocarbons or SARA listed
all metals and most plastics. ingredients. Free of acids, alkalis,
72542 15 oz. Aerosol, 72535 5 gal., 72529 50 gal. chlorides, ethylene glycol ethers,
phosphates and TTOs (Total Toxic
Organic Compounds). JET-LUBE 5000 effectively removes carbon, grease,
oil and other organic deposits. Environmentally safe and ozone friendly. Use
full strength for maximum results or dilute with fresh or salt water. Used
for heavy-duty parts degreasing, pressure washing, steam cleaning,
ultrasound cleaning, or simply by brushing or spraying and then rinsing with
water or wiping clean. JET-LUBE 5000 is safe on all metals, most plastics,
vinyl, rubber, and Þberglass, carpet, wood and concrete.
71043 16 oz. Trigger Spray, 71033 1 gal., 71035 5 gal., 71029 50 gal.