Professional Documents
Culture Documents
BDWS Slickline Report Oct 10 2013 of 1.875 Pxn-Plug (BDWS Tool) and 1.875 Px-Plug (PTT Tool)
BDWS Slickline Report Oct 10 2013 of 1.875 Pxn-Plug (BDWS Tool) and 1.875 Px-Plug (PTT Tool)
Oct 10 2013
Subject : Pretest and drift run 1.875” PXN-Plug ( BDWS TOOL ) and 1.875” PX-Plug ( PTT TOOL )
Drift run 1.875” PX-Plug ( PTT Tool ) in Y-Tool profile and 1.875” SSD report on below.
1.Prepare 1.875” PX-Plug with 1.875” X-Line running tool ( Selective ) position.
2.Drift run 1.875” PX-Plug with 1.875” X-Line running tool ( Selective ) position into Y-Tool profile can’t pass
at No-Go of Y-Tool pull out.
3.Drift run 1.875” PX-Plug with 1.875” X-Line running tool ( Selective ) position into 1.870” SSD can’t pass SSD
profile.
4.Contact with K.Panit of job and contact with K.Phatsakron HLB of job.
Drift run 1.875” PXN-Plug ( BDWS tool ) in Y-tool profile and 1.875” SSD profile report on
below.
1.Prepare 1.875” PXN-Plug with 1.875” X-Line running tool ( Selective ) position.
2.Drift run 1.875” PXN-Plug with 1.875” X-Line running tool ( Selective ) position into Y-Tool profile can pass
at No-Go of Y-Tool picture on below.
Black Diamond-Thailand
1.875”PX-PLUG ( PTT TOOL )
1.875” PXN-PLUG ( BDWS TOOL )
3. Drift run 1.875” PXN-Plug with 1.875” X-Line running tool ( Selective ) position into SSD profile can pass at
SSD profile picture on below.
1.Drift run 1.875” B-Selective Shifting tool for check sure can pass Y-Tool No-Go and SSD profile.
* Report to K.Panit, K.Asadawut and K.Phatsakron HLB.
2. For share need to check with HLB team they have 1.875” XN-Nipple or not. If have can use install below SSD
for set 1.875” PXN-Plug.