Professional Documents
Culture Documents
Matricle: UBA18P0179
School: Coltech
Fig 1
Fig 1 above shows our components wired up and ready for simulation
Results
A two-way switching connection means you can control an electrical equipment like a bulb by two
switches placed at different places.
Two-way switch can be operated from any of the switches independently, meaning whatever the
position of the other switch (ON/OFF) you can control the light with the other switch.
When switches are in opposite states the lamp will be inn an off state as shown in fig 1
Fig 2
When the switches are in the same state the lamp is ON as shown in fig 2
The truth table below shows the state of the lamp of the two-way switch
0 0 0
0 1 1
1 0 1
1 1 0
Where the 0 represents the OFF condition and 1 represents the ON condition