Professional Documents
Culture Documents
5
6
7
8
9
10 Always cut the pipe 90° square. For all diameters, and in
W RSPRESS
particular Ø26 and greater, use of the RS32 or RS63 pipe
11 cutter is recommended.
12
13
RS32 - RS63
40
1
2
Slide the calibrated pipe all the way into the press fitting 3
R so the pipe is visible through the windows.
4
5
6
7
8
9
Open the compression jaw and ensure that the shoulder
10
T of the fitting is located in the groove of the jaws. To
ensure correct compression, operate the press tool until 11
the jaws release automatically.
12
13
41