Professional Documents
Culture Documents
Chain Specs PDF
Chain Specs PDF
American
Petroleum
Institute
AMERICAN CHAIN LICENSED UNDER
ASSOCIATION SPEC 7F-0022
ISO 9001 REGISTERED
3
Coated T-Pin
High shear T-pins resist corrosion and retain position in the
most extreme applications. Sizes 200, 264, 240.
Solid Rollers
Shotpeened solid rollers for ultimate sprocket contact,
shock resistance and toughness.
Available Options
Advanced Corrosion Resistant Plating is available upon request.
This plating process combines three metals that are mechanically
applied to chain components before assembly. This technology
is superior to other plating processes in providing corrosion
resistance.
Made in
Coil Tubing Injector Kits
U.S.A.
As chains interact with the injector sprockets, positioned gripper
blocks secure the tubing to advance or retract the coil within the
well. Special chain pins manufactured from alloy steel are through
hardened for tensile strength and fatigue resistance. Drives coil
tubing injector chains are available with Corrosion Resistant Silver
Shield CR® Series coatings to address stress corrosion cracking
caused by moist operating environments.
Made in U.S.A.
80-1 through 80-8
Width Average
Roller Transverse Average
Pitch Between Link Plate Pin Dia. Pi n Tensile Riveted Cottered
Dia. Pitch Weight
L.P. Strength
80-2 1.000 0.627 0.625 0.943 0.125 0.313 1.155 2.434 0.768 0.638 0.857 0.642 43,000 3.735 STD STD
80-3 1.000 0.627 0.625 0.943 0.125 0.313 1.155 3.589 0.768 0.638 0.857 0.642 64,500 5.602 STD STD
80-4 1.000 0.627 0.625 0.943 0.125 0.313 1.155 -- -- -- 0.857 0.642 86,000 7.436 MTO STD
80-5 1.000 0.627 0.625 0.943 0.125 0.313 1.155 -- -- -- 0.857 0.642 107,500 9.031 MTO STD
80-6 1.000 0.627 0.625 0.943 0.125 0.313 1.155 -- -- -- 0.857 0.642 129,000 10.824 MTO STD
80-8 1.000 0.627 0.625 0.943 0.125 0.313 1.155 -- -- -- 0.857 0.642 172,000 14.432 MTO STD
100-2 1.250 0.755 0.750 1.180 0.156 0.375 1.411 3.000 0.908 0.785 0.912 0.785 66,000 5.603 STD STD
100-3 1.250 0.755 0.750 1.180 0.156 0.375 1.411 -- -- -- 0.912 0.785 99,000 8.470 MTO STD
100-4 1.250 0.755 0.750 1.180 0.156 0.375 1.411 -- -- -- 0.912 0.785 132,000 11.110 MTO STD
100-5 1.250 0.755 0.750 1.180 0.156 0.375 1.411 -- -- -- 0.912 0.785 165,000 13.970 MTO STD
100-6 1.250 0.755 0.750 1.180 0.156 0.375 1.411 -- -- -- 0.912 0.785 198,000 16.720 MTO STD
100-8 1.250 0.755 0.750 1.180 0.156 0.375 1.411 -- -- -- 0.912 0.785 264,000 22.290 MTO STD
NOTE:
• Available in carbon steel.
• Cut to length chain available.
• Corrosion resistant finishes for components available upon request.
• Offsets not recommended/please contact Drives Engineering.
• T-head cotters used on sizes 200, 264, and 240 Oil Field Chain.
• Heavy chain series available/MTO.
• Product specifications subject to change without notice.
ISO 9001 REGISTERED
9
Made in U.S.A.
120-1 through 120-8
Width Average
Roller Transverse Average
Pitch Between Link Plate Pin Dia. Pi n Tensile Riveted Cottered
Dia. Pitch Weight
L.P. Strength
120-2 1.500 1.000 0.875 1.425 0.187 0.437 1.789 3.767 1.119 1.071 1.119 0.989 90,200 8.270 STD STD
120-3 1.500 1.000 0.875 1.425 0.187 0.437 1.789 -- -- -- 1.119 0.989 135,300 12.100 MTO STD
120-4 1.500 1.000 0.875 1.425 0.187 0.437 1.789 -- -- -- 1.119 0.989 180,400 16.170 MTO STD
120-5 1.500 1.000 0.875 1.425 0.187 0.437 1.789 -- -- -- 1.119 0.989 225,500 20.240 MTO STD
120-6 1.500 1.000 0.875 1.425 0.187 0.437 1.789 -- -- -- 1.119 0.989 270,600 24.200 MTO STD
120-8 1.500 1.000 0.875 1.425 0.187 0.437 1.789 -- -- -- 1.119 0.989 360,800 32.270 MTO STD
121-2 1.500 0.750 0.875 1.425 0.187 0.437 1.546 -- -- -- 0.994 0.864 90,200 6.760 MTO STD
121-3 1.500 0.750 0.875 1.425 0.187 0.437 1.546 -- -- -- 0.994 0.864 135,300 10.080 MTO STD
NOTE:
• Available in carbon steel.
• Cut to length chain available.
• Corrosion resistant finishes for components available upon request.
• Offsets not recommended/please contact Drives Engineering.
• T-head cotters used on sizes 200, 264, and 240 Oil Field Chain.
• Heavy chain series available/MTO.
• Product specifications subject to change without notice.
• 121 series replaces 472 series.
ISO 9001 REGISTERED
10
Made in U.S.A.
140-1 through 140-8
Width Average
Roller Transverse Average
Pitch Between Link Plate Pin Dia. Pi n Tensile Riveted Cottered
Dia. Pitch Weight
L.P. Strength
140-2 1.750 1.000 1.000 1.663 0.220 0.500 1.924 4.062 1.253 1.150 1.253 1.068 114,900 10.270 STD STD
140-3 1.750 1.000 1.000 1.663 0.220 0.500 1.924 -- -- -- 1.253 1.068 172,350 15.290 MTO STD
140-4 1.750 1.000 1.000 1.663 0.220 0.500 1.924 -- -- -- 1.253 1.068 229,800 20.460 MTO STD
140-5 1.750 1.000 1.000 1.663 0.220 0.500 1.924 -- -- -- 1.253 1.068 287,250 25.520 MTO STD
140-6 1.750 1.000 1.000 1.663 0.220 0.500 1.924 -- -- -- 1.253 1.068 344,700 30.690 MTO STD
140-8 1.750 1.000 1.000 1.663 0.220 0.500 1.924 -- -- -- 1.253 1.068 459,600 40.920 MTO STD
160-2 2.000 1.250 1.126 1.899 0.252 0.563 2.305 4.843 1.454 1.370 1.454 1.269 145,600 13.210 STD STD
160-3 2.000 1.250 1.126 1.899 0.252 0.563 2.305 -- -- -- 1.454 1.269 218,400 20.790 MTO STD
160-4 2.000 1.250 1.126 1.899 0.252 0.563 2.305 -- -- -- 1.454 1.269 291,200 27.830 MTO STD
160-5 2.000 1.250 1.126 1.899 0.252 0.563 2.305 -- -- -- 1.454 1.269 364,000 34.760 MTO STD
160-6 2.000 1.250 1.126 1.899 0.252 0.563 2.305 -- -- -- 1.454 1.269 436,800 41.690 MTO STD
180-2 2.250 1.400 1.406 2.132 0.281 0.687 2.592 -- -- -- 1.561 1.390 190,000 18.100 MTO STD
NOTE:
• Available in carbon steel.
• Cut to length chain available.
• Corrosion resistant finishes for components available upon request.
• Offsets not recommended/please contact Drives Engineering.
• T-head cotters used on sizes 200, 264, and 240 Oil Field Chain.
• Heavy chain series available/MTO.
• Product specifications subject to change without notice.
ISO 9001 REGISTERED
11
Made in U.S.A.
200-1 through 200-3
Width Average
Roller Transverse Average
Pitch Between Link Plate Pin Dia. Pi n Tensile Riveted Cottered
Dia. Pitch Weight
L.P. Strength
200-2 2.500 1.490 1.562 2.312 0.312 0.781 2.817 -- -- -- 1.889 1.544 200,000 21.000 MTO STD
200-3 2.500 1.490 1.562 2.312 0.312 0.781 2.817 -- -- -- 1.889 1.544 300,000 31.500 MTO STD
264-2 2.500 1.490 1.562 2.375 0.375 0.875 3.083 -- -- -- 2.015 1.672 270,000 24.900 MTO STD
264-3 2.500 1.490 1.562 2.375 0.375 0.875 3.083 -- -- -- 2.015 1.672 405,000 37.300 MTO STD
264-4 2.500 1.490 1.562 2.375 0.375 0.875 3.083 -- -- -- 2.015 1.672 540,000 49.800 MTO STD
240-2 3.000 1.864 1.875 2.812 0.375 0.937 3.458 -- -- -- 2.212 1.854 304,400 32.200 MTO STD
240-3 3.000 1.864 1.875 2.812 0.375 0.937 3.458 -- -- -- 2.212 1.854 456,600 49.400 MTO STD
240-4 3.000 1.864 1.875 2.812 0.375 0.937 3.458 -- -- -- 2.212 1.854 608,800 65.700 MTO STD
241-1 3.000 1.250 1.875 2.812 0.375 0.937 -- 3.094 -- -- 1.905 1.547 152,200 16.200 MTO MTO
NOTE:
• Available in carbon steel.
• Cut to length chain available.
• Corrosion resistant finishes for components available upon request.
• Offsets not recommended/please contact Drives Engineering.
• T-head cotters used on sizes #200, #264 and #240 Oil Field Chain.
• Heavy chain series available including 241H / MTO basis.
• Product specifications subject to change without notice.
Arlington • Birmingham • Chicago American Chain Association
Dallas • Davenport • Denver (ACA)
Algeria • Argentina • Australia • Brazil
Des Moines • Detroit • Fort Worth
Canada • Croatia • Egypt • France Conveyor Equipment
Houston • Indianapolis
Germany • Holland • India • Italy • Malaysia Manufacturers Association
Kansas City • Los Angeles
(CEMA)
Mexico • Morocco • Poland • Qatar • Mexico City • Milwaukee
Singapore • Spain • Sweden • Tunisia Minneapolis • Mississauga • Modesto Association of Equipment
Ukraine • United Arab Emirates Montreal • Newcastle Manufacturers (AEM)
Philadelphia • Portland • Richmond
United Kingdom • United States Grain Elevator and
Rochester • St. Louis • Salt Lake City
Venezuela • Vietnam • Yemen Processing Society
Tampa • Tucson • Vancouver
(GEAPS)
Fulton, Illinois
Home Office & Manufacturing
Fulton, Illinois 61252
Phone 1-800-435-0782 • Fax 1-815-589-4420
USA
Oil Field Chain
American Petroleum
Institute (API) 7F
American
Petroleum
Institute
www.drivesinc.com AMERICAN CHAIN LICENSED UNDER
ASSOCIATION SPEC 7F-0022
USA/ Fulton, IL