Professional Documents
Culture Documents
DK Materialespecifikation, hovedproduktgrupper
S
GB
Materialspecifikation, huvudproduktgrupper
Material specification, main product groups
Date: 01 MAR 19 P
D Materialienspezifikation, Hauptproduktgruppen
F Matériaux, traitements et peinture Index
HS, Stringer SP, Barrier PL, Plinth / PLC, Plinth Corner
Material: Material: Material:
2.0 mm hot 2.0 mm hot 2.5 mm hot
galvanized steel galvanized steel galvanized steel
BSD and CS, Box side C, Cover plate DG, Plain cover plate
Material: Material: Material:
1.5 mm hot 1.25 mm steel 1-3M wide: 1.25 mm
galvanized steel steel
Pre-treatment: 4M wide: 1.5 mm
Pre-treatment: Iron phosphating steel
Iron phosphating
Colour: Pre-treatment:
Colour: Light grey, RAL 7035 Iron phosphating
Light grey, RAL 7035
Surface: Colour:
Surface: Fine structure Light grey, RAL 7035
Fine structure
Surface:
Fine structure
T, TT etc., Door ID and IDS, Mounting bar JK and AK, Cable support
Material: Material: Material:
1.5 / 2.0 mm steel 2.0 mm steel 2.5 mm steel
Pre-treatment:
Iron phosphating
Colour:
Light grey, RAL 7035
Surface:
Fine structure
Pre-treatment:
Iron phosphating
Colour:
Light grey, RAL 7035
Surface:
Fine structure
Colour: Colour:
Light grey, RAL 7035 Light grey, RAL 7035
Surface: Surface:
Fine structure Fine structure
EFXxX, Front plate 4208-0X00, Instrument plate EGP and EGPE, Mounting plate
Material: Material: Material:
1.5 mm steel 1.5 mm steel 2.5 mm hot
galvanized steel
Pre-treatment: Pre-treatment:
Iron phosphating Iron phosphating
Colour: Colour:
Light grey, RAL 7035 Light grey, RAL 7035
Surface: Surface:
Fine structure Fine structure
PID, Drawer Plug-in Front plate Plug-in / MPI PICH, Component holder
Material: Material: Material:
1.5 mm hot 1.5 mm alu. zinc 1.5 mm hot
galvanized steel galvanized steel
S225, S2000, S7000, Busbar holder S225, S2000, Form covering H, Corner
Material: Material: Material:
PC 2.0 mm PC Zinc
Surface:
Fine structure
Colour: Colour:
Clear Light grey, RAL 7035
Colour: Pre-treatment:
Light grey, RAL 7035 Iron phosphating
Surface: Colour:
Fine structure Light grey, RAL 7035
Surface:
Fine structure
Colour:
Light grey, RAL 7035
Surface:
Fine structure
Corrosion Class: C2 High acc. to ISO 12944-6 / Indoor panel acc. IEC / EN 61439
CUBIC corrosion classes are only valid for Panel parts, which have been through one of
CUBIC’s paint shops with their pretreatment and subsequently coasted with
CUBIC’s standard fine structure powder paint RAL 7035.
Application process:
Pre-rinsing Pre-rinsing
Iron phosphating Passivation
Water Demi-water
Based on RAL 7035, but CUBIC’s requirements to the tolerance of the colour are higher than the standard value according to the RAL
1)
system.
If the painted surfaces need cleaning, it is recommended to use detergent, type LOCTITE® SF 7070TM 2) or
LOCTITE® SF 7840TM 2).
If you have to remove remains from tape or similar, you can use ISOPRAPANYL 2) (also called isopropyl alcohol).
2)
The guidelines from the manufacturer should always be followed.