Professional Documents
Culture Documents
DK Generelle projekteringsanvisninger
S
GB
Generalla projekteringsanvisning
General projecting guidelines
Date: 01 MAR 19 P
D Generelle projektierungsanweisung
F Instructions générales de princopal Index
Check list for panel construction, general points:
Barriers bounding a section must be fitted from bottom to top - both in the
front and in the rear side.
Mounting bars or similar must be fitted from the front to the rear.
Plinth reinforcements must be fitted, if the weight per transport unit > 600 kg.
The width of the bottom plates must follow the width of the section.
For possible future extensions of an assembly, you must take the placing of the
busbar holder into consideration, f.ex. by placing the outer busbar holders
1M or 2M from the front. Likewise, you must take the placing of components and
outgoing cables, etc. into consideration.
Dimensions
in mm
Door / Cover
Module Panel construction Inside
plate
[M] [mm] [mm] [mm] [mm] [s1)] [mm]
Rear access
Front access
Top view
Top view
Outgoing units Cable way Outgoing units Cable way Outgoing units Outgoing units
4M
Front
Top view
M
Front x4
Ma
Plain cover
plate, dgXxX
Front Barrier, spX
Top view
Front
1056-0000
≤ IP41
Panel height 2 3 4 5 6 7 8 9 10 11 12
in modules
Number of
0 0 1 2 2 2 3 3 4 4 4
supports, etc.
Reinforcements
JK ID IDS ICCP SP
≥ 600 kg
≤ 2400 kg
Reinforced hinge,
complete
0610-0000s
9 2)
53 24
20
136 1072
20
40
Cower ø13 72 304
screw
136 ø151) ø15 ø13
20
20
24 Plinth frame, 6x2M
4
See details 136 72 136 See details 142 222 576 222 142
See details 136 72 120 72 136 See details 142 222 384 384 222 142
See details 142 222 222 142 See details 142 222 384 192 384 222 142
See details 142 222 192 222 142 See details 142 222 384 384 384 222 142
1)
For plinth reinforcement.
Plinth frame, 5x2M Plinth frame, 10x2M 2)
Cover screw 4mm, if not wall bracket.
Wall
136
9 2) 1072
53 24 40
72
20
20 120 496
Cower ø13 72
screw
136 ø151) ø15 ø13
20
20
24 Plinth frame, 6x3M
See details 142 222 576 222 142
4
136
1264
40
72
120 496
72
136 136
496 1456
40 40
72 72
72 72
136 136
688 1648
40 40
72 72
72 72
136 136
880 1840
40 40
72 72
72 72
1)
For plinth reinforcement.
Plinth frame, 5x3M Plinth frame, 10x3M 2)
Cover screw 4mm, if not wall bracket.
Wall
9 2) 142
1264
53 24 40
20
222
20
Cower ø13 688
screw
222
20
20 ø151) ø15 ø13
142
24
4
Plinth frame, 7x4M
See 142 222 222 142 See 142 222 384 384 222 142
details details
142 142
688 1456
40 40
222 222
688 688
222 222
See 142 222 192 222 142 See 142 222 384 192 384 222 142
details details
142 142
880 1648
40 40
222 222
688 688
222 222
See 142 222 384 222 142 See 142 222 384 384 384 222 142
details details
142 142
1072 1840
40 40
222 222
688 688
222 222
1)
For plinth reinforcement.
Plinth frame, 6x4M Plinth frame, 10x4M 2)
Cover screw 4mm, if not wall bracket.
Sealing
6820-0208 = 1 meter
3040-0812
3040-0812
Sealing
6820-0208
With screw type 1030-0510 (2 pcs per bottom plate) and sealing
tape (2274-0000) the bottom is IP54 and can support up to 85 kg.
Without screw and sealing the bottom is IP33 and can support up
to 50 kg.
2010-4812
P24XX
1030-0510