Professional Documents
Culture Documents
Contents
B&R Revision Information (12.07.2010)VC_V3.35.6 VisualComponents SG4 Runtime Upgrade...........................................................................................................1
Contents......................................................................................................................................................................................................................................1
Requests and problems by product and version.........................................................................................................................................................................1
1A4000.02 Visual Components.........................................................................................................................................................................................1
Requests and problems by product/component..........................................................................................................................................................................2
1A4000.02 Visual Components.........................................................................................................................................................................................2
Libraries...................................................................................................................................................................................................................2
SG4 Editor − PageDesigner....................................................................................................................................................................................3
SG4 Runtime − Alarmsystem..................................................................................................................................................................................3
SG4 Runtime − Alarmsystem VC 3.06.4.................................................................................................................................................................4
SG4 Runtime − Common.........................................................................................................................................................................................4
SG4 Runtime − Common VC−Build vom 24.11.2008..............................................................................................................................................5
SG4 Runtime − Controls..........................................................................................................................................................................................5
SG4 Runtime − Controls 3.06.4...............................................................................................................................................................................8
SG4 Runtime − Controls 2.6.0.0007.UG01.RuntimeSG4 Build 1601......................................................................................................................8
SG4 Runtime − Keyhandling...................................................................................................................................................................................8
SG4 Runtime − Scaling...........................................................................................................................................................................................8
SG4 Runtime – TerminalMode................................................................................................................................................................................8
SG4 Runtime − VNC................................................................................................................................................................................................9
B&R Revision Information (12.07.2010)
VC_V3.35.6 VisualComponents SG4 Runtime Upgrade
The current revision information can be downloaded from the B&R Homepage download area (http://www.br−automation.com/download).
Contents
• Requests and problems by product/version
• Requests and problems by product/component
400022897,
Problem VC 3.35.0 VC 3.34.4 Task can't be destroyed when loaded in the specified time.
400023200
205378 Problem VC 3.34.8 VC 3.34.6 VNC connection no longer possible – Authentication error
400022311 Problem VC 3.34.8 VC 3.34.2 Listbox control shows different color when locked
400021049 Problem VC 3.34.8 − B&R VNC Viewer doesn't work reliably with AutoConnect
400022249 Problem VC 3.34.6 VC 3.34.4 Data point not updated when page is changed
400022312 Problem VC 3.34.6 VC 3.34.2 HTML control cuts off the last line
400019972 Problem VC 3.34.6 VC 3.34.0 Changing languages quickly causes the HTML control to trigger a PageFault
400017946 Problem VC 3.34.6 V3.0.71.29 SP05 Focus stays on the input field, even when the layer is hidden
400021489 Problem VC 3.34.6 V2.7.0.0016 SP09 Terminal: VA_Attach returns Status 0, even if there no drawbox can be seen
400020452 Problem VC 3.34.4 VC 3.34.2 PageFault when many alarm groups with index gaps
400019924 Problem VC 3.34.4 VC 3.34.0 "Out of Physical Memory" when booting the terminal
400020054 Problem VC 3.34.4 VC 3.34.0 Deviation from VNC colors when they are changed using VA_SetPaletteColor
400018340 Problem VC 3.34.4 V3.0.71.24 UP03 Transferring VCLIB not possible.
400016766 Problem VC 3.34.4 V3.0.71.24 SP03 VCLib can't be compiled after conversion
400017953 Problem VC 3.34.4 V2.7.0.0015 SP08 GIF images are no longer shown in the HTML control
400015555,
400014477, V2.5.3.0028.SP05
Problem VC 3.34.4 VCDATA contains incorrect data – Touch screen can no longer be used
400008686, [U2.90]
400012920
V2.5.3.0028.SP03
164005 Problem VC 3.34.4 Cycle time violation during priority change
[R2.90]
Invalid values for the DisplayBrightness data point of the internal data source when CPU load is
400015608 Problem VC 3.34.2 V3.0.71.20 SP02
high
400016772 Problem VC 3.34.2 V2.7.0.0015 SP08 PageFault when changing to trend page
400008686 New function VC 3.34.2 V2.7.0.0012 SP05 VC4 calibration – Plausibility check
400013828 Problem VC 3.33.8 VC 3.33.4 VC trend: Curves are displayed with an offset.
400014333 Problem VC 3.33.8 VC 3.33.4 AddFractionDigitsDatapoint doesn't work with negative values
400013100 Problem VC 3.33.8 V3.0.71.20 SP02 VA_GetActAlarmList and VA_wcGetActAlarmList don't work independently of each other
400014228 Problem VC 3.33.8 V2.7ßeta Runtime: First time data points are refreshed after VC is opened takes very long
400009670 Problem VC 3.33.8 − MP251 and MP281 sporadically boot without the battery
400014137 Problem VC 3.33.8 − Variables are not updated on the terminal until the page is opened
192550 New function VC 3.33.6 VC 3.33.4 Support of X20CP1483
400012226 Problem VC 3.33.6 VC 3.33.2 The Edit Up virtual key starts at a whole number value for REAL variables
400010730 Problem VC 3.33.6 VC 3.33.2 Memory leak in the VNC Viewer
400009827 Problem VC 3.33.6 − Time base drifts apart when the trend graph is disabled/enabled.
400011053 Problem VC 3.33.4 VC 3.33.0 The ColorDatapoint of a bitmap on a touchpad doesn't work
400010225 Problem VC 3.33.4 VC 3.32.4 VC trend: Time axis drifts away from the CPU time.
400011018,
Problem VC 3.33.4 V3.0.71.16 SP01 Warning 28715 appears in the logbook if 2 VnC server are used.
400010230
400010678 Problem VC 3.33.4 V3.0.71.16 SP01 When changing pages to an invalid index, double entries are made in the page history
400006776 Problem VC 3.33.4 V2.7.0.0011 SP04 Page fault if alarms generated over a long period of time
400011189 Problem VC 3.33.4 V2.7.0.0011 SP04 Momentary key action on a touchpad gets stuck when button released
400011033 Problem VC 3.33.4 V2.7.0.0010 SP03 If 2 internal datasources are used, the log book entry "Unable to create Rtk object." appears.
400010183 Problem VC 3.33.4 V2.6.0.0014 SP04 Entries via USB keyboard still possible in locked edit control
400009536 Problem VC 3.33.2 VC 3.33.0 Syntax−Highlighting doesn't work correct
400008676 Problem VC 3.33.2 VC 3.33.0 VC Trend Control > Online Continuous freezes at zoom functions.
400008128 Problem VC 3.33.2 VC 3.32.8 Page fault after an PREVIOUS or NEXT action on a HTML control, if no HTML page exists.
400007222 Problem VC 3.33.2 V3.0.71.10 Page change to Index 0 using ChangePageDatapoint not possible
VA_QuitAlarms must be called twice with the same parameters for the alarm group to be
400009099 Problem VC 3.33.2 V2.7.0.0010 SP03
acknowledged.
400007576,
Problem VC 3.33.2 V2.7.0.0010 SP03 User trend is not displayed on the terminal
400009500
175663 Problem VC 3.33.2 − Incorrect LED states if LED information is output and key states are read at the same time
186080 Problem VC 3.33.0 V3.0.71.16 SP01 Watchdog is triggered if the slider of a ListBox control is set to "Auto".
184610 Problem VC 3.33.0 V2.7.0.0009 SP02 Alarms no longer displayed on terminal
Revision Information VC_V3.35.6 VisualComponents SG4 Runtime Upgrade 2
184170 Problem VC 3.33.0 V2.7.0.0009 SP02 CPU goes into service mode without a logger entry
400006596 Problem VC 3.33.0 V2.7.0.0009 SP02 VC trend: Watchdog triggered when TrendValueContainer too small.
184775 Problem VC 3.33.0 V2.7.0.0009 SP02 Dropdown element: Error in index evaluation
183033 Problem VC 3.33.0 V2.7.0.0007 PageFault when loading a large HTML file
184145 New function VC 3.33.0 V2.6.0.0010 SP01 Touchpad disappears very slowly
184415 Problem VC 3.32.8 VC 3.32.8 Visualization freezes sporadically when changing to an alarm page.
183270 Problem VC 3.32.8 VC 3.32.4 PageFault when visualization is overloaded
183415 Problem VC 3.32.8 V3.0.71.10 Multiline text alignment executed incorrectly on button control
400006272 Problem VC 3.32.8 V2.7.0.0009 SP02 Visualization freezes when changing to the alarm page
400005628 Problem VC 3.32.8 V2.7.0.0008 SP01 PageFault when scrolling in the alarm list
181325 Problem VC 3.32.8 V2.7.0.0007 VA_wcGetActAlarmList outputs the wrong status when called the first time.
182040 Problem VC 3.32.8 V2.7.0.0007 In VC4 32−bit mode, 32−bit bitmaps can't be displayed using the VA_BlitBitmap function.
400005677 Problem VC 3.32.8 V2.7.0.0007 Visualization freezes when an open dropdown menu is locked
181060 Problem VC 3.32.8 V2.6.0.0012 SP02 Backlight can no longer be turned off on an APC620 with i855 chipset
179548 Problem VC 3.32.8 V2.6.0.0012 SP02 StackFault when starting the visualization with an HTML control.
172280 Problem VC 3.32.8 V2.6.0.0007 Pagefault if no trend data are connected
The DrawBox control will be drawn with black background during runtime, undependently of the
171960 Problem VC 3.32.8 V2.6.0.0007
projected color in the editor.
171805 Problem VC 3.32.8 V2.6.0.0007 Textf arrays without teex with index 0 are not displayed in the listbox during runtime.
167205 Problem VC 3.32.8 V2.6.0.0007 Standard values for brightness and contrast selected poorly for VNC
V2.5.3.0028.SP07
177153 Problem VC 3.32.8 Memory leak in the alarm system
[B2.91]
V2.5.3.0028.SP02
160658 Problem VC 3.32.8 VNC keyboard causes offset shift on the hardware keys in the key matrix
[Q2.90]
400008688 Problem VC 3.32.8 − Font displayed differently on the target than configured in the editor.
167037 Problem VC 3.32.8 − LED modes shifted on MP40/50
181990 Problem VC 3.32.6 V2.7.0.0007 PageFault if VA_wcGetActAlarmList is called during an overload
182085 Problem VC 3.32.6 V2.7.0.0007 Touchpad is closed when a layer is shown.
400004441 Problem VC 3.32.6 V2.7.0.0007 The trend control of type "User" only updates the trend data sporadically during runtime.
177965 Problem VC 3.32.6 V2.7.0.0005 Terminal mode: Touchpad open bit is not reset automatically
182440 Problem VC 3.32.6 V2.6.0.0012 SP02 ListBox: Selected entry not visible
400004923 Problem VC 3.32.6 V2.6.0.0012 SP02 Listbox index is not updated.
172380 Problem VC 3.32.6 V2.6.0.0007 Trend control: Autoscroll doesn't work when two curves with different TrendTimeScales are used.
179513 New function VC 3.32.6 − Support for external CSS files
If the recording of an online trend is triggered a second time, the scroll data point is not
180198 Problem VC 3.32.4 V3.0.71.9
reinitialized
178743 New function VC 3.32.4 V2.7.0.0005 Calling a page with an anchor doesn't output it at the CurrentURLDatapoint
182135 Problem VC 3.32.2 VC 3.05.6 VisVC library is initialized prematurely and causes a continuous reboot
178880 Problem VC 3.32.2 V2.6.0.0012 SP02 Prev and Next only work once with HTMLViewControl
179438 Problem VC 3.32.2 V2.6.0.0011 SP02 Completion value only possible up to 32767
400002468 Problem VC 3.32.2 − No transparency in GIF bitmaps
174440 Problem VC 3.05.2 V2.6.0.0010 SP01 Long delay before restarting a trend recording.
Trend control: Incorrect display of the trend curve when a PLC unit is used on the value data
168388 Problem VC 3.05.2 V2.6.0.0007
point.
167032 Problem VC 3.05.2 V2.6.0.0007 VA_SetContrast sets the brightness on the MP50
V2.5.3.0028.SP04
165860 Problem VC 3.05.2 In Terminal mode, VA_NGetAlCurPos always returns group number 0
[S2.90]
400020571 Problem − V2.7.0.0015 SP08 Alarm system doesn't work on the terminal after Config alarm control is displayed.
182975 Problem − V2.6.0.0012 SP02 PageFault when transferring shared resources
400005486,
400009155, V2.5.3.0028.SP04
Problem − Continuous reboot damages CompactFlash
400007436, [S2.90]
400024553
Libraries
ID#400016766 : solved problem, known since V3.0.71.24 SP03, solved since VC 3.34.4
Since some variable types in the VCLib are declared incorrectly in the fun file, the library can't be compiled when these functions are used.
If small changes are made to the project and the system is restarted after the project is transferred, a continuous reboot occurs because the
VisVC library is initialized too soon.
The first time it is called the function returns the value 247 (busy), even when the call was successful.
ID#181060 : solved problem, known since V2.6.0.0012 SP02, solved since VC 3.32.8
ID#165860 : solved problem, known since V2.5.3.0028.SP04 [S2.90], solved since VC 3.05.2
ID# 400005486, 400009155, 400007436, 400024553 : known problem since V2.5.3.0028.SP04 [S2.90], correction planned for VC 3.32.4
On some devices, shutting off damages the file system on the CompactFlash card.
Furthermore, AR doesn't observe the boot order of the BR modules (dependency problem).
ID#179438 : solved problem, known since V2.6.0.0011 SP02, solved since VC 3.32.2
If you define a virtual key of type ToggleDatapoint in Visual Components NG and select a UINT process variable as completion data point, the
completion value cannot be higher than 32767.
ID#400013100 : solved problem, known since V3.0.71.20 SP02, solved since VC 3.33.8
If the functions VA_wcGetActAlarmList and VA_GetActAlarmList are used simultaneously to query the alarm lists for the project inserted here,
there is interaction between the two VC system tasks.
It can be observed that the tasks change each other's return values.
Since the status 240 is no longer correctly set for the number of alarms, after a certain amount of time there is an array overrun, and therefore
a PageFault.
ID#400006776 : solved problem, known since V2.7.0.0011 SP04, solved since VC 3.33.4
ID#400009099 : solved problem, known since V2.7.0.0010 SP03, solved since VC 3.33.2
VA_QuitAlarms must be called twice with the same parameters for the alarm group to be acknowledged.
If the VISAPI function VA_QuitAlarms is called, the first call after a restart causes all alarms to be acknowledged and the status 0 is output.
For all calls after this, the function must be called twice with the same parameters in order for the function
"Acknowledge all alarms in alarm group" to be executed.
ID#184610 : solved problem, known since V2.7.0.0009 SP02, solved since VC 3.33.0
If an alarm filter is used, when the page is changed multiple times no alarms are displayed any more.
When changing to an alarm page with an alarm control, the visualization freezes sporadically.
ID#184170 : solved problem, known since V2.7.0.0009 SP02, solved since VC 3.33.0
ID#400006272 : solved problem, known since V2.7.0.0009 SP02, solved since VC 3.32.8
If the alarm control has a time display, the visualization freezes when changing to a page with the control.
Revision Information VC_V3.35.6 VisualComponents SG4 Runtime Upgrade 4
ID#183270 : solved problem, known since VC 3.32.4, solved since VC 3.32.8
An unnecessary reference in the alarm system causes sporadic crashes when overloading the visualization.
ID#400005628 : solved problem, known since V2.7.0.0008 SP01, solved since VC 3.32.8
If you scroll quickly and long in the alarm list, a PageFault occurs.
ID#177153 : solved problem, known since V2.5.3.0028.SP07 [B2.91], solved since VC 3.32.8
After several days of operation, no memory is free on the device, which causes crashes and other errors
ID#164005 : solved problem, known since V2.5.3.0028.SP03 [R2.90], solved since VC 3.34.4
ID#400020571 : known problem since V2.7.0.0015 SP08, correction planned for VC 3.34.4
Alarm system doesn't work on the terminal after Config alarm control is displayed.
After an alarm control of type Config is displayed, the history alarm control no longer displays any alarms.
The problem occurs when very many alarm groups are used.
ID#400011722 : solved problem, known since V2.6.0.0012 SP02, solved since VC 3.06.4
Battery Discharged alarm should not be triggered on targets without a battery (4PP3xx.xxxx−xx).
If you change to a page with an alarm control, the CurrentPage variable is not written. The variable is not set to the respective value until the
page is left, which causes another error.
ID#400018340 : solved problem, known since V3.0.71.24 UP03, solved since VC 3.34.4
Transferring the VCLIB causes error messages that make it impossible to transfer the project without first clearing the memory.
ID#400015608 : solved problem, known since V3.0.71.20 SP02, solved since VC 3.34.2
Invalid values for the DisplayBrightness data point of the internal data source when CPU load is high
High CPU loads can cause the value 0 is displayed for simultaneous accesses.
ID# 400015555, 400014477, 400008686, 400012920 : solved problem, known since V2.5.3.0028.SP05 [U2.90], solved since VC 3.34.4
Calibration permits incorrect states which can result in the device no longer being able to be operated using the touch screen.
Runtime: First time data points are refreshed after VC is opened takes very long
ID#400011033 : solved problem, known since V2.7.0.0010 SP03, solved since VC 3.33.4
If 2 internal datasources are used, the log book entry "Unable to create Rtk object." appears.
ID# 400011018, 400010230 : solved problem, known since V3.0.71.16 SP01, solved since VC 3.33.4
If you have 2 VnC server with directly mapped visualizations in your project the warning 28715 − Unable to create Rtk object − will appear in
the logbook.
Revision Information VC_V3.35.6 VisualComponents SG4 Runtime Upgrade 5
When a ScreenSaverDatapoint is connected, it is not possible to change to the page with Index 0 using ChangePageDatapoint.
In VC4 32−bit mode, 32−bit bitmaps can't be displayed using the VA_BlitBitmap function.
Incorrect LED states if LED information is output and key states are read at the same time
If LED information is written and key states are read at the same time, then only one state is transferred correctly to the hardware.
This can cause incorrect LED states to occur.
ID#174440 : solved problem, known since V2.6.0.0010 SP01, solved since VC 3.05.2
If you stop a trend in continuous mode while it is already continuously scrolling (right edge has been reached) and would then like to restart it,
there is a long delay.
If this action is executed before the recording reaches the edge, there is no delay before the restart.
If a GIF file with a defined transparency color is inserted in the editor, this setting is ignored.
Support of X20CP1483
When the touchpad is closed, it takes a long time for it to disappear. It is deconstructed piece by piece.
If you link to an HTML page that contains an anchor, the anchor is not output at the CurrentURLDatapoint.
ID#182975 : known problem since V2.6.0.0012 SP02, correction planned for VC 3.06.4
ID#400013511 : solved problem, known since V3.0.71.20 SP02, solved since VC 3.33.6
Room and CPU temperature data for an X20 CPU are not displayed during runtime
The values for the room and CPU temperature of an X20 CPU are displayed correctly in the I/O mapping, but not via the internal VC data
sources.
ID# 400022897, 400023200 : solved problem, known since VC 3.34.4, solved since VC 3.35.0
With long HTML documents, it's not possible to scroll down to the last line.
Revision Information VC_V3.35.6 VisualComponents SG4 Runtime Upgrade 6
ID#400022311 : solved problem, known since VC 3.34.2, solved since VC 3.34.8
ID#400017946 : solved problem, known since V3.0.71.29 SP05, solved since VC 3.34.6
Focus stays on the input field, even when the layer is hidden
The focus doesn't pass to the next input field if there is no valid input field when the layer is hidden.
If another layer with an input field is then shown, the focus still stays on the hidden control.
ID#400017953 : solved problem, known since V2.7.0.0015 SP08, solved since VC 3.34.4
ID#400016772 : solved problem, known since V2.7.0.0015 SP08, solved since VC 3.34.2
If a trend has REAL variables connected and invalid limits, the target crashes.
Variables are not updated on the terminal until the page is opened
When a page is opened after a status data point is changed, the affected controls are not shown/hidden until after the page has completely
loaded.
ID#400010678 : solved problem, known since V3.0.71.16 SP01, solved since VC 3.33.4
When changing pages to an invalid index, double entries are made in the page history
If a ChangePage variable is used to change to a non−existing page, the page is not changed, but the initial page is added a second time to the
page history. When changing to the previously visited page, the button must therefore be pressed twice to trigger a page change.
The color of the bitmap background can't be changed using the ColorDatapoint if it is on a touchpad.
Syntax−Highlighting was only used for one character after the key character. The problem occured because of control characters in the text
groups.
Page fault after an PREVIOUS or NEXT action on a HTML control, if no HTML page exists.
ID#186080 : solved problem, known since V3.0.71.16 SP01, solved since VC 3.33.0
ID#400006596 : solved problem, known since V2.7.0.0009 SP02, solved since VC 3.33.0
ID#184775 : solved problem, known since V2.7.0.0009 SP02, solved since VC 3.33.0
If you set the index to an invalid location and then move the min/max data points so that the index is valid, the old index remains selected in
the dropdown control.
Seems to only check validity when the index is changed.
Revision Information VC_V3.35.6 VisualComponents SG4 Runtime Upgrade 7
ID#183415 : solved problem, known since V3.0.71.10, solved since VC 3.32.8
If a multiline text is output on the button control, the text alignment is not performed properly.
On an identically configured text control, the alignment is OK, however.
If no new memory can be allocated when loading a large HTML page, a PageFault occurs.
If a VC trend runs for a longer time (>1 hour), the time axis deviates considerably (~10 sec) from the actual CPU time.
ID#182440 : solved problem, known since V2.6.0.0012 SP02, solved since VC 3.32.6
If not all entries in the ListBox are not visible, the selected entry may not be displayed after the selection is confirmed.
If a layer is unhidden while a touchpad is open, the touchpad is closed and entry is cancelled.
The trend control of type "User" only updates the trend data sporadically during runtime.
ID#400004923 : solved problem, known since V2.6.0.0012 SP02, solved since VC 3.32.6
If the index data point of a listbox changes during runtime while the listbox is in editing mode, the element with the selected index is not
selected. If the entire listbox is hidden and shown using the status data point, the element with the selected index should be selected. Instead,
no elements are selected.
If the recording of an online trend is triggered a second time, the scroll data point is not reinitialized
If the recording of an online trend is triggered a second time using the trigger data point, the scroll data point is not reinitialized.
ID#179548 : solved problem, known since V2.6.0.0012 SP02, solved since VC 3.32.8
ID#178880 : solved problem, known since V2.6.0.0012 SP02, solved since VC 3.32.2
The control dependent function can be used to jump back and forth within the navigation history in the HTMLView control.
In terminal mode, status bi 3 (touchpad open) is not automatically reset when the touchpad is closed.
Trend control: Autoscroll doesn't work when two curves with different TrendTimeScales are used.
If two trend curves with different TrendTimeScales are used in a trend configuration, when the end is reached only the first curve is continued
and the second one doesn't scroll.
If a trend curve control without trend data is used, the target crashes.
Textf arrays without teex with index 0 are not displayed in the listbox during runtime.
With special fonts, the number of lines in a listbox is not the same on the target as in the editor.
Trend control: Incorrect display of the trend curve when a PLC unit is used on the value data point.
The HTML control in Visual Components should support external CSS files (in addition to embedded and inline CSS files).
The line height of listbox controls is miscalculated during runtime. This results in differences between the number of lines in the project
development interface and the listbox that is actually displayed.
The Edit Up virtual key starts at a whole number value for REAL variables
If a REAL variable that is connected to a unit group with a default precision is displayed in a numeric control in which the number of decimal
places changes dynamically during runtime, then an error occurs when the actions Edit Up and Edit Down are used to change the value of the
variable. The value is not directly incremented or decremented. First it is rounded to the default precision of the unit group and then it is
incremented or decremented.
ID#400011189 : solved problem, known since V2.7.0.0011 SP04, solved since VC 3.33.4
If there is a momentary key action on a touchpad, and the button is left in the pressed state (without releasing the touch screen), the data point
remains set, but the button appears to be reset.
ID#400010183 : solved problem, known since V2.6.0.0014 SP04, solved since VC 3.33.4
If an edit control is locked using a status data point, it is still possible to make entries using a USB keyboard.
ID#160658 : solved problem, known since V2.5.3.0028.SP02 [Q2.90], solved since VC 3.32.8
VNC keyboard causes offset shift on the hardware keys in the key matrix
Adding a VNC server causes the hardware keys in the key matrix to be mapped starting at offset 128.
Without the VNC server the hardware keys start at offset 0.
If a negative value is entered for an AddFractionDigits data point, no decimal places are removed, but for positive values they are added.
ID#400021489 : solved problem, known since V2.7.0.0016 SP09, solved since VC 3.34.6
If a VA_Attach is opened on a terminal visualization, Status 0 is returned even if the drawbox control is not visible.
Since drawboxes are not supported on the terminal, the error status 7080 should be returned.
Revision Information VC_V3.35.6 VisualComponents SG4 Runtime Upgrade 9
ID#400019924 : solved problem, known since VC 3.34.0, solved since VC 3.34.4
Due to a problem in the memory manager, the entire memory is used up when booting a terminal, causing an "Out of Physical Memory"
exception.
ID# 400007576, 400009500 : solved problem, known since V2.7.0.0010 SP03, solved since VC 3.33.2
It isn't possible to connect via VNC, since the password entry always ends with an authentication error.
If the VNC server is not yet ready when the B&R VNC Viewer first establishes a connection, there will be problems establishing a connection
later on.
Deviation from VNC colors when they are changed using VA_SetPaletteColor
When a color is changed during runtime using VA_SetPaletteColor, this change is ignored by VNC.
This results in different colors being displayed on the target and VNC.
When changing pages, memory is always allocated, which eventually leads to a PageFault.
Standard values for brightness and contrast selected poorly for VNC
When making a VNC connection with the MP40/MP50, the VNC server sends 0 as default values for the brightness and contrast.
This cause the MP40 display to be difficult to read.
The LED modes for the MP40/50 are incorrect. "On" results in "Blinking".