Professional Documents
Culture Documents
Product Guide
ASME B30.5
Imperial 85%, Metric 85%, DIN/ISO
Features
• 13,6 t (15 USt) capacity
Steering
The YB5515-2 comes standard with three steering modes:
front (two-wheel), four-wheel coordinated, and four-wheel
crab steer with electronic self alignment. Operators can
choose between modes via three-position rocker switch
Outriggers located on dash panel.
The YB5515-2 outriggers are two-position
(0˚ and 100˚) beam/jack style outriggers with
inverted jack cylinders and pivoting pad.
Operator cab
New operator control layout with
hydraulic proportional joystick
controls, tilt steering wheel, and automotive
dash panel gauges and indicator lights.
Contents
Specifications 4
Dimensions and weights 7
Working ranges and load charts (imperial) 9
Working ranges and load charts (metric) 15
Working ranges and load charts (DIN/ISO) 21
Transport and lifting data 27
Rigging chart 28
Symbols glossary 29
Specifications
Superstructure
Load Moment Indicator
Boom A simple, effective, and easy to use load moment
indicating system used in conjunction with the
4,6 m – 12,5 m (15 ft – 41 ft) three-section, anti-two block system to assist the operator in efficient
full-power, synchronized, telescopic boom. operation of the unit within the limits of the load
Maximum tip height: 14,2 m (46.5 ft) chart. The display panel displays the max. load allowed,
the actual hook load, length and angle of the boom,
and load radius in Dot Matrix numerical values and
*Optional Boom provides a load utilization colored bar graph. Inputs by
operator are maximum allowed load and parts of line.
5,4 m – 15,4 m (17.8 ft – 50 ft) four-section, If non-permitted conditions are approached the L.M.I.
full-power, synchronized, telescopic boom. will warn the operator with an audible alarm and a
Maximum tip height: 16,5 m (54 ft) warning light and will lock out those functions that
may aggravate the condition.
Anti-two block device 140L (37 gal) steel hydraulic reservoir with sight
level gauge and steel side plating to guard against side
Standard anti-two block device (hardwired), which, impact.
when activated, provides an audible and visual warning
to the operator and “locks out” all functions whose Return line replaceable filter with by-pass protection
movement can cause two-blocking. and service indicator. Cartridge filter rating of 3
micron.
Two speed gear motor driven hoist with automatic Cummins QSB 3.3L four cylinder / turbo-charged diesel
spring applied / hydraulically released wet brake. rated at 75kW (100 hp) at 2600 rpm. Includes std. 120V
Smooth drum with cable follower. engine block heater and air intake “Grid” heater. Engine
hour meter located in dash display. Alternator: 120 amp.
Maximum hoist pull (first layer): 63,6 kN (14,300 lb) Maximum Torque: 414Nm (305 ft/lb).
Maximum permissible single line pull: Fuel requirements: Maximum of 15 ppm sulphur content.
44,5 kN (10,000 lb.) (3.5:1 design factor) Requires “Ultra Low” sulphur diesel fuel.
NOTE: Tier IV required for sale in North America and
Maximum single line speed: 64 m/min (210 fpm) European Union countries.
Outriggers Transmission
Single stage hydraulic telescoping beam with oblique Powershift with four speeds forward and four reverse.
style jack cylinder on all four corners. Provides Steering column mounted shifter.
extended and down and retracted and down lifting
capabilities.
Operators control station
Integral holding valve on both beam and jack.
Outrigger positioning indicator located in dash display. Frame mounted, open air style control station with cab
shell includes all crane functions and driving controls
Outrigger pad size: 222 mm x 254 mm and equipped with overhead safety glass. Other
(8.75 in x 10 in) standard equipment includes a suspension seat with
seat belt, sight level bubble and 1,1 kg (2.5 lb) fire
Maximum outrigger pad load: 15 876 kg (35,000 lb) extinguisher, and tilt steering wheel. The dash panel
will display the fuel level gauge, water temperature
gauge, engine rpm, battery voltage, and hour meter.
Outrigger controls Indicator lights will display parking brake, low
transmission pressure, low brake pressure, outrigger
Independent outrigger control rocker switches for beam position, headlights, work lights (if ordered), and
or jack selection with a separate extend /retract rocker hoist 3rd wrap (if ordered). Crane function indicator
selector switch. 360˚ level bubble located inside cab. and turn signal indicators are also included. The load
indicator display will be mounted on the top of the
dash panel for direct line of sight for the operator.
Includes the standard cab shell and all controls and Full LED lighting includes turn indicators, head, tail,
indicators noted above, with the addition of front, rear, brake, and hazard warning lights recessed mounted.
and right side glass, a split (two-piece) hinged door
with sliding glass, front windshield wiper and washer, Maximum speed
hot water heater and defroster with fan and cab dome
light.
33.8 km/h (21.0 mph)
Electrical system
Gradeability (theoretical)
One heavy duty maintenance free 12V battery,
820CCA at 0˚F 68%.....(to drive train stall) NO LOAD
40%....(to drive train stall) with 9072 kg
(20,000 lb) DECK LOAD
Drive
Standard three steering modes. 18 t (20 USt) two sheave low profile “galvanize coated”
Front (two wheel), four wheel coordinated, and hook block with “quick reeve design”. Back-up motion
four wheel crab steer with electronic self realignment. alarm; outrigger motion alarm; non-skid decking;
Three position rocker switch located on dash panel. front and rear lifting, towing, and tie-down lugs.
Dimensions
6871 mm (270.5") RETRACTED 15,2 m (50') BOOM
Dimensions
1540 mm(60.6")
E E
A B C D 12.5 m (41 ft) boom 15,2 m (50 ft) boom
Two-wheel steer 3375 mm 6058 mm 6218 mm 6675 mm 7750 mm 7662 mm
(11 ft 1 in) (19 ft 10.5 in) (20 ft 4.8 in) (21 ft 10.8 in) (25 ft 5 in) (25 ft 2 in)
2475 mm (97.4")
Four-wheel steer 1722 mm 3841 mm 3993
223 mm (8.8") mm 4481 mm 5572 mm 5478 mm
(5 ft 8 in) (12 ft 7 in) (13 ft 1 in) (14 ft 8 in) (18 ft 3 in) (18 ft 0 in)
18°
1195 mm (47.0")
1140 mm 2420 mm (95.3")
(44.9") 1994 mm (78.5")
80° 40° 4020 mm (158.3")
1431 mm 1546 mm
(56.3") 4658 mm (183.4")
(60.9")
2472 mm
(97.3")
1283 mm
(50.5")
RADIUS B
RADIUS E
RADIUS C
R 2140 mm (84.3")
RADIUS A
RADIUS D
2481 mm (97.7")
2475 mm (97.4")
223 mm (8.8")
1073 mm
OTING NOSE 936 mm (42.4")
om only (36.9")
18° 18°
1195 mm (47.0")
2420 mm (95.3")
1994 mm (78.5")
40° 4020 mm (158.3")
1546 mm 4658 mm (183.4")
(60.9")
Grove YB5515-2 7
Dimensions and weights
1910 mm (75.2")
955 mm(37.6")
743 mm
(29.3")
2737 mm
(107.8")
1824 mm
(71.8")
975 mm (38.4")
1951 mm (76.8")
1159.804 mm (45.7")
2320 mm (91.3")
2472 mm (97.3")
1994 mm
(78.5")
1338 mm
(52.7")
165 mm
(6.5")
1220 mm (48.0") 2020 mm (79.5")
2439 mm (96.0") 4039 mm (159.0")
1336 mm (52.6")
2136 mm (84.1")
2671 mm (105.2")
4271 mm (168.1")
Weights
GVW Front Rear
kg lb kg lb kg lb
Basic machine: Including 12,5 m (41 ft) main boom, main hoist with 97,5 m
13 488 29,735 5817 12,823 7671 16,912
(320 ft) of wire rope, 18 t (20 USt) hook block, full counterweight, Tier IV engine
Add: enclosed cab, heater and glass 84,8 187 37,1 82 47,6 105
Crane weight 13 573 29,922 5854 12,905 7719 17,017
Basic machine: Including 12,5 m (41 ft) main boom, main hoist with 97,5 m
13 488 29,735 5817 12,823 7671 16,912
(320 ft) of wire rope, 18 t (20 USt) hook block, full counterweight, Tier IV engine
Add: 4,6 m (15 ft) fixed swingaway extension and extension carrier brackets
178 394 271 598 -93 -204
and downhaul weight
Crane weight 13 666 30,129 6088 13,421 7578 16,708
Basic machine: Including 12,5 m (41 ft) main boom, main hoist with 97,5 m
13 488 29,735 5817 12,823 7671 16,912
(320 ft) of wire rope, 18 t (20 USt) hook block, full counterweight, Tier IV engine
Add: 5,4 m - 15,4 m (17.8 ft - 50 ft) four-section full-power boom 435 961 363 802 72 159
8
Working range imperial
68
64
60
56
52
48
44
' BO
41.1
40
OM
36
' BO
69°
65°
34.0
60°
32 55°
55˚
50°
OM
45°
28
' BO
40°
26.0
35°
24
30°
20 25°
OM
20°
' BO
16 15°
17.7
10°
12
5°
8 0°
0
8 4 0 4 8 12 16 20 24 28 32 36 40 44 48 52 56
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove YB5515-2 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 9
Load chart imperial
1) The rated loads are the maximum lift capacities
MAIN BOOM LOAD RATINGS ON OUTRIGGERS as determined by operating radius, boom length
Extended and Down 360˚ or Retracted and Down Front/Rear and boom angle. The operating radius is the
horizontal distance from a projection of the axis
17.7 ft BOOM 26 ft BOOM 34 ft BOOM 41.1 ft BOOM
of rotation to the supporting surface, before
Boom Rated Boom Rated Boom Rated Boom Rated loading, to the center of vertical hoist line or
Radius Angle Load Angle Load Angle Load Angle Load tackle with load applied.
(ft) (deg) (lb) (deg) (lb) (deg) (lb) (deg) (lb)
6 65 30,000 – – – – – – 2) The rated loads shown on outriggers do not
8 57 26,850 68.5 26,400 – – – – exceed 85% of actual tipping. The rated loads
shown on rubber do not exceed 75% of actual
10 48 22,300 63.5 21,000 – – – – tipping. Retracted outrigger loads meet ASME
12 37.5 18,600 58.5 17,500 67 17,000 – – B30.5-2011. These ratings are based on freely
14 21.5 15,000 53 14,900 63 14,000 68.5 13,350 suspended loads with the crane leveled, standing
14.7 0 13,500 51 13,500 61.5 13,250 67.5 13,100 on a firm, uniform supporting surface. Practical
16 – – 46.5 12,250 59 12,400 65.5 12,450 working loads depend on supporting surface, op-
18 – – 40 11,000 55 11,200 63 11,350 erating radius and other factors affecting stabil-
ity. Hazardous surroundings, climatic conditions,
20 – – 31.5 9200 50.5 9550 59 9680 experience of personnel and proper training must
22 – – 19.5 7400 45.5 8300 55.5 8450 all be taken into account by the operator.
22.9 – – 0 6900 43.5 7750 54 7750
24 – – – – 40.5 7100 52 7340 3) The weights of all load handling devices such
26 – – – – 34.5 6000 48 6450 as hooks, hook blocks, slings, etc., except the
hoist rope, shall be considered part of the load.
28 – – – – 27 5300 44 5730
See above.
30 – – – – 16.5 4500 39.5 5120
30.9 – – – – 0 4100 38 4850 4) Ratings on outriggers are for either outriggers
32 – – – – – – 34.5 4620 fully extended and down or fully retracted and
34 – – – – – – 29 4180 down. Ratings for outriggers fully retracted and
36 – – – – – – 21 3800 down will apply for any intermediate outrigger
setting.
37.9 – – – – – – 0 3480
5) Ratings on rubber depend on 12.00R20 tire
capacity, condition of tires and proper infla-
MAIN BOOM LOAD RATINGS ON OUTRIGGERS tion pressure (130 psi). Loads on rubber may be
Retracted and Down 360˚ transported at a maximum speed of 2.5 mph on a
17.7 ft BOOM 26 ft BOOM 34 ft BOOM 41.1 ft BOOM smooth, hard, level surface with boom retracted
Boom Rated Boom Rated Boom Rated Boom Rated to the shortest length possible and centered over
Radius Angle Load Angle Load Angle Load Angle Load front. Do not use jib with crane on rubber.
(ft) (deg) (lb) (deg) (lb) (deg) (lb) (deg) (lb)
6) For operating radius not shown, use load rat-
6 65 26,000 – – – – – – ing of next larger radius.
8 57 19,500 68.5 17,940 – – – –
10 48 13,630 63.5 12,890 – – – – 7) The maximum deck load only is 20,000 lb.
12 37.5 9730 58.5 9920 67 9500 – – Combined boom and deck loads are not permit-
ted on rubber.
14 21.5 7390 53 7720 63 7680 68.5 7440
14.7 0 6810 51 6800 61.5 6850 67.5 6850 8) Do not induce any external side loads to boom
16 – – 46.5 6165 59 6310 65.5 6200 or jib.
18 – – 40 5030 55 5200 63 5250
20 – – 31.5 4190 50.5 4350 59 4420
22 – – 19.5 3530 45.5 3690 55.5 3770
22.9 – – 0 3280 43.5 3450 54 3550
24 – – – – 40.5 3160 52 3240
26 – – – – 34.5 2730 48 2810 NOTES:
28 – – – – 27 2370 44 2450 SHADED AREAS ARE GOVERNED BY
30 – – – – 16.5 2080 39.5 2140 STRUCTURAL STRENGTH, DO NOT RELY ON
30.9 – – – – 0 1950 38 1910 TIPPING.
32 – – – – – – 34.5 1880
OPERATION OF THIS EQUIPMENT IN EXCESS
34 – – – – – – 29 1650 OF RATING CHARTS AND DISREGARD OF
36 – – – – – – 21 1460 INSTRUCTIONS IS DANGEROUS AND VOIDS
37.9 – – – – – – 0 1290 WARRANTY.
SIDE
15° 15°
30° 30°
FRONT REAR
SIDE
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
10 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart imperial
NOTES:
MAIN BOOM ON RUBBER JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY
CHART AND MAIN CAPACITY CHART.
Any Boom Length SHADED AREAS ARE GOVERNED BY STRUCTURAL
STRENGTH, DO NOT RELY ON TIPPING.
Radius (ft) Front Rating (lb) 360˚Rating (lb)
OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING
6 17,800 15,650 CHARTS AND DISREGARD OF INSTRUCTIONS IS
8 14,600 11 ,400 DANGEROUS AND VOIDS WARRANTY.
10 11 ,800 9 7 20
12 9 550 8590
14 8010 67 1 0 SIDE
18 5610 4400
20 4 7 30 3630 SIDE
22 3960 3080
22.9 3650 2850
24 3300 2585
26 2860 2255
28 2530 1980
30 2310 17 60
30.9 2100 1650
32 2035 1540
34 187 5 1375
36 1650 1260
37.9 1450 1100
1) The rated loads are the maximum lift capacities 4) Ratings on outriggers are for either outriggers fully
as determined by operating radius, boom length extended and down or fully retracted and down. Rat-
and boom angle. The operating radius is the ings for outriggers fully retracted and down will apply
horizontal distance from a projection of the axis of for any intermediate outrigger setting.
rotation to the supporting surface, before loading,
to the center of vertical hoist line or tackle with 5) Ratings on rubber depend on 12.00R20 tire capacity,
load applied. condition of tires and proper inflation pressure (130
psi). Loads on rubber may be transported at a maxi-
2) The rated loads shown on outriggers do not ex- mum speed of 2.5 mph on a smooth, hard, level surface
ceed 85% of actual tipping. The rated loads shown with boom retracted to the shortest length possible
on rubber do not exceed 75% of actual tipping. and centered over front. Do not use jib with crane on
Retracted outrigger loads meet ASME B30.5-2011. rubber.
These ratings are based on freely suspended loads
with the crane leveled, standing on a firm, uniform 6) For operating radius not shown, use load rating of
supporting surface. Practical working loads depend next larger radius.
on supporting surface, operating radius and other
factors affecting stability. Hazardous surroundings, 7) The maximum deck load only is 20,000 lb. Combined
climatic conditions, experience of personnel and boom and deck loads are not permitted on rubber.
proper training must all be taken into account by
the operator. 8) Do not induce any external side loads to boom or jib.
3) The weights of all load handling devices such as
hooks, hook blocks, slings, etc., except the hoist
rope, shall be considered part of the load. See
above.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove YB5515-2 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 11
Working range imperial
69°
H1 M
B
5' JI
WIT ' BOO
65
65°
60°
50'
55°
50°
OM
45°
BO
40'
40°
35°
OM
30°
BO
25°
29'
20°
15°
OM
' BO
10°
17.3
5°
0°
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
12 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart imperial
1) The rated loads are the maximum lift capacities
as determined by operating radius, boom length
MAIN BOOM LOAD RATINGS ON OUTRIGGERS and boom angle. The operating radius is the
Extended and Down 360˚ or Retracted and Down Front/Rear horizontal distance from a projection of the axis
1 7 .3 ft BOOM 29 ft BOOM 40 ft BOOM 50 ft BOOM of rotation to the supporting surface, before
loading, to the center of vertical hoist line or
Boom Rated Boom Rated Boom Rated Boom Rated tackle with load applied.
Radius Angle Load Angle Load Angle Load Angle Load
(ft) (deg) (lb) (deg) (lb) (deg) (lb) (deg) (lb)
2) The rated loads shown on outriggers do not
6 64.5 30,000 – – – – – – exceed 85% of actual tipping. The rated loads
8 56.5 25,7 60 – – – – – – shown on rubber do not exceed 75% of actual
10 47 21 ,27 0 67 16,950 – – – – tipping. Retracted outrigger loads meet ASME
12 36 18,050 62.5 16,950 – – – – B30.5-2011. These ratings are based on freely
14.2 0 13,1 00 57 .5 15,520 67 .5 15,520 – – suspended loads with the crane leveled, standing
16 – 1 8900 53 12,420 65 12,420 – – on a firm, uniform supporting surface. Practical
18 – – 47 .5 10,990 61 .5 10,990 68.5 10,990 working loads depend on supporting surface, op-
20 – – 41 9830 58 9 800 66 9830 erating radius and other factors affecting stabil-
22 – – 34 8600 54.5 867 0 63 8700 ity. Hazardous surroundings, climatic conditions,
24 – – 25 7 400 51 7 490 60.5 7500 experience of personnel and proper training must
25.9 – – 0 6480 47 6 580 58 6620 all be taken into account by the operator.
28 – – – – 42.5 5770 55 5800
30 – – – – 38 5 1 30 52 51 60 3) The weights of all load handling devices such
32 – – – – 32.5 4 51 0 49 4620 as hooks, hook blocks, slings, etc., except the
hoist rope, shall be considered part of the load.
34 – – – – 25.5 4 1 20 45.5 41 60
See above.
36 – – – – 16 371 0 42 37 10
36.9 – – – – 0 3 620 40.5 3590 4) Ratings on outriggers are for either outriggers
38 – – – – – – 38 3410 fully extended and down or fully retracted and
40 – – – – – – 34 3040 down. Ratings for outriggers fully retracted and
42 – – – – – – 29 2760 down will apply for any intermediate outrigger
44 – – – – – – 23 2410 setting.
46.9 – – – – – 0 2110
5) Ratings on rubber depend on 12.00R20 tire
capacity, condition of tires and proper infla-
MAIN BOOM LOAD RATINGS ON OUTRIGGERS tion pressure (130 psi). Loads on rubber may be
transported at a maximum speed of 2.5 mph on a
Retracted and Down 360˚ smooth, hard, level surface with boom retracted
1 7 .3 ft BOOM 29 ft BOOM 40 ft BOOM 50 ft BOOM to the shortest length possible and centered over
Boom Rated Boom Rated Boom Rated Boom Rated front. Do not use jib with crane on rubber.
Radius Angle Load Angle Load Angle Load Angle Load
(ft) (deg) (lb) (deg) (lb) (deg) (lb) (deg) (lb) 6) For operating radius not shown, use load rat-
6 64.5 30,000 – – – – – – ing of next larger radius.
8 56.5 25,7 60 – – – – – –
10 47 7) The maximum deck load only is 20,000 lb.
18,600 67 16,950 – – – –
Combined boom and deck loads are not permit-
12 36 13,400 62.5 13,300 – – – –
ted on rubber.
14.2 0 10,000 57 .5 10,400 67 .5 9 97 0 – –
16 – – 53 8550 65 8 500 – – 8) Do not induce any external side loads to boom
18 – – 47 .5 7 050 61 .5 7 1 50 68.5 6950 or jib.
20 – – 41 5920 58 6 030 66 591 0
22 – – 34 5040 54.5 5 1 60 63 5060
24 – – 25 4330 51 4 450 60.5 4390
25.9 – – 0 37 80 47 3 900 58 3860
28 – – – – 42.5 3 390 55 337 0
30 – – – – 38 2980 52 297 0 NOTES:
32 – – – – 32.5 2630 49 2630 SHADED AREAS ARE GOVERNED BY
34 – – – – 25.5 2330 45.5 2340 STRUCTURAL STRENGTH, DO NOT RELY ON
36 – – – – 16 2060 42 2080 TIPPING.
36.9 – – – – 0 1 960 40.5 197 0
OPERATION OF THIS EQUIPMENT IN EXCESS
38 – – – – – – 38 1850
OF RATING CHARTS AND DISREGARD OF
40 – – – – – – 34 1650 INSTRUCTIONS IS DANGEROUS AND VOIDS
42 – – – – – – 29 147 0 WARRANTY.
44 – – – – – – 23 131 0
46.9 – – – – – – 0 1100
SIDE
15° 15°
30° 30°
FRONT REAR
SIDE
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove YB5515-2 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane. 13
Load chart imperial
NOTES:
MAIN BOOM ON RUBBER JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY
Any Boom Length CHART AND MAIN CAPACITY CHART.
Radius (ft) Front Rating (lb) 360˚ Rating (lb) SHADED AREAS ARE GOVERNED BY STRUCTURAL
6 17,800 15,550 STRENGTH, DO NOT RELY ON TIPPING.
8 14,350 11,500
10 11,450 8950 OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING
12 9790 7420 CHARTS AND DISREGARD OF INSTRUCTIONS IS
14.2 8170 6030 DANGEROUS AND VOIDS WARRANTY.
16 7020 5350
18 6210 4450
20 5540 3670
22 4830 3050
24 4160 2640
25.9 3630 2220 SIDE
28 3280 1960
30 2910 1650 15° 15°
32 2600 1400 30° 30°
FRONT REAR
34 2320 1170
36 2080 990
36.9 1980 900 SIDE
38 1900 820
40 1700 670
42 1520 510
44 1370 420
46.9 1160 –
1) The rated loads are the maximum lift capacities 4) Ratings on outriggers are for either outriggers fully
as determined by operating radius, boom length extended and down or fully retracted and down. Rat-
and boom angle. The operating radius is the ings for outriggers fully retracted and down will apply
horizontal distance from a projection of the axis of for any intermediate outrigger setting.
rotation to the supporting surface, before loading,
to the center of vertical hoist line or tackle with 5) Ratings on rubber depend on 12.00R20 tire capacity,
load applied. condition of tires and proper inflation pressure (130
psi). Loads on rubber may be transported at a maxi-
2) The rated loads shown on outriggers do not ex- mum speed of 2.5 mph on a smooth, hard, level surface
ceed 85% of actual tipping. The rated loads shown with boom retracted to the shortest length possible
on rubber do not exceed 75% of actual tipping. and centered over front. Do not use jib with crane on
Retracted outrigger loads meet ASME B30.5-2011. rubber.
These ratings are based on freely suspended loads
with the crane leveled, standing on a firm, uniform 6) For operating radius not shown, use load rating of
supporting surface. Practical working loads depend next larger radius.
on supporting surface, operating radius and other
factors affecting stability. Hazardous surroundings, 7) The maximum deck load only is 20,000 lb. Combined
climatic conditions, experience of personnel and boom and deck loads are not permitted on rubber.
proper training must all be taken into account by
the operator. 8) Do not induce any external side loads to boom or jib.
3) The weights of all load handling devices such as
hooks, hook blocks, slings, etc., except the hoist
rope, shall be considered part of the load. See
above.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
14 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Working range metric
20,7 3
19,51
18,29
17,07
14,63
M
OO
13,41
MB
1 2 ,5
12,19
M
OO
MB
10,97 69°
65°
1 0,4
60°
9,7 5 55°
55
M
50°
OO
45°
MB
8,53
40°
7 ,9
35°
7 ,32
30°
M
6,1 0 25°
OO
MB
20°
4,88
5,4
1 5°
1 0°
3,66
5°
2,44 0°
1,22
0
-2,44 0 2,44 4,88 7,32 9,7 5 12,1 9 14,63 17, 07
-1,22 1,22 3,66 6,1 0 8,53 10,97 13,41 15,85
Operating radius in meters from axis of rotation
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove YB5515-2 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
15
Load chart metric
1) The rated loads are the maximum lift capacities
MAIN BOOM LOAD RATINGS ON OUTRIGGERS as determined by operating radius, boom length
Extended and Down 360˚ or Retracted and Down Front/Rear and boom angle. The operating radius is the
horizontal distance from a projection of the axis
5.4 m BOOM 7 .9 m BOOM 1 0.4 m BOOM 1 2.5 m BOOM
of rotation to the supporting surface, before
Boom Rated Boom Rated Boom Rated Boom Rated loading, to the center of vertical hoist line or
Radius Angle Load Angle Load Angle Load Angle Load tackle with load applied.
(m) (deg) (kg) (deg) (kg) (deg) (kg) (deg) (kg)
1,8 65 13 600 – – – – – – 2) The rated loads shown on outriggers do not
2,4 57 ,5 12 1 7 5 69 11 97 5 – – – – exceed 85% of actual tipping. The rated loads
3,0 49 9 850 64 9525 – – – – shown on rubber do not exceed 75% of actual
tipping. Retracted outrigger loads meet ASME
3,7 36,5 8 050 58 7 925 66,5 7 7 00 – –
B30.5-2011. These ratings are based on freely
4,3 20,5 6 800 52,5 6 7 50 63 6 350 68,5 6 050 suspended loads with the crane leveled, standing
4,5 0 6 1 25 51 6 1 25 61 ,5 6 000 67 ,5 5 925 on a firm, uniform supporting surface. Practical
4,9 – – 46,5 5 550 59 5600 65,5 5 625 working loads depend on supporting surface, op-
5,5 – – 39,5 497 5 54,5 507 5 62 5 1 25 erating radius and other factors affecting stabil-
6,1 – – 31 ,5 4150 50,5 4325 59 4 37 5 ity. Hazardous surroundings, climatic conditions,
6,7 – – 19,5 3350 45,5 37 50 55,5 3 825 experience of personnel and proper training must
all be taken into account by the operator.
7 ,0 – – 0 31 25 43,5 3500 54 351 5
7 ,3 – – – – 40,5 3200 52 3 325 3) The weights of all load handling devices such
7 ,9 – – – – 34,5 27 00 48 2925 as hooks, hook blocks, slings, etc., except the
8,5 – – – – 27 ,5 2400 44 2600 hoist rope, shall be considered part of the load.
9,1 – – – – 1 7 ,5 2025 40 2320 See above.
9,4 – – – – 0 1850 37 ,5 2200
9,8 – – – – – – 34 2090 4) Ratings on outriggers are for either outriggers
fully extended and down or fully retracted and
10,4 – – – – – – 28 1890
down. Ratings for outriggers fully retracted and
11 ,0 – – – – – – 20,5 17 20 down will apply for any intermediate outrigger
11 ,6 – – – – – – 0 157 0 setting.
SIDE
15° 15°
30° 30°
FRONT REAR
SIDE
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
16 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart metric
NOTES:
MAIN BOOM ON RUBBER JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY
CHART AND MAIN CAPACITY CHART.
Any Boom Length SHADED AREAS ARE GOVERNED BY STRUCTURAL
Radius (m) Front Rating (kg) 360˚Rating (kg) STRENGTH, DO NOT RELY ON TIPPING.
6,1 21 40 1640
SIDE
6,7 17 90 1390
7,0 1650 1290
7,3 1490 11 70
7,9 1290 1020
8,5 11 40 890
9,1 1040 7 90
9,4 950 7 40
9,8 920 690
1 0,4 850 620
1 1,0 7 50 57 0
1 1,6 650 490
1) The rated loads are the maximum lift capacities 5) Ratings on rubber depend on 12.00R20 tire capac-
as determined by operating radius, boom length ity, condition of tires and proper inflation pressure
and boom angle. The operating radius is the (8,9 bar). Loads on rubber may be transported at a
horizontal distance from a projection of the axis of maximum speed of 4,0 km/h on a smooth, hard, level
rotation to the supporting surface, before loading, surface with boom retracted to the shortest length
to the center of vertical hoist line or tackle with possible and centered over front. Do not use jib with
load applied. crane on rubber.
2) The rated loads shown on outriggers do not ex- 6) For operating radius not shown, use load rating of
ceed 85% of actual tipping. The rated loads shown next larger radius.
on rubber do not exceed 75% of actual tipping.
Retracted outrigger loads meet ASME B30.5-2011. 7) The maximum deck load only is 7260 kg. Combined
These ratings are based on freely suspended loads boom and deck loads are not permitted on rubber.
with the crane leveled, standing on a firm, uniform
supporting surface. Practical working loads depend 8) Do not induce any external side loads to boom or jib.
on supporting surface, operating radius and other
factors affecting stability. Hazardous surroundings,
climatic conditions, experience of personnel and
proper training must all be taken into account by
the operator.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove YB5515-2 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
17
Working range metric
1,80,6 0,6 1,8 3,0 4,3 5,5 6,7 7 ,9 9,1 10,4 11,6 12,8 14,0 15,2 15,8 17 ,1 18,3 19,5
2,4 1,2 0 1,2 2,4 3,7 4,9 6,1 7 ,3 8,5 9,8 11,0 12,2 13,4 14,6 15,2 16,5 17 ,7 18,9
23,8 23,8
23,2 23,2
22,6 22,6
21 ,9 21 ,9
21 ,3 21 ,3
20,7 69˚ 20,7
20,1 H 4 OOM 20,1
19,5 J IB 19,5
,6 m
18,9 18,9
WIT m B
18,3 18,3
19,8
17 ,7 17 ,7
17 ,1 17 ,1
16,5 16,5
OM
15,8 15,8
15,2 15,2
2m
14,0 14,0
13,4 55° 13,4
OM
11,6 11 ,6
40°
1 2,
11,0 11 ,0
10,4 35° 10,4
OM
9,8 9,8
9,1 30° 9,1
BO
8,5 8,5
m
7,9 25° 7 ,9
8,8
7,3 7 ,3
20°
6,7 6,7
6,1 6,1
M
15°
OO
5,5 5,5
4,9 4,9
mB
10°
4,3 4,3
5,3
3,7 5° 3,7
3,0 3,0
2,4 0° 2,4
1,8 1,8
1,2 1,2
0,6 0,6
0 0
2,4 1,2 0 1,2 2,4 3,7 4,9 6,1 7 ,3 8,5 9,8 11,0 12,2 13,4 14,6 15,2 16,5 17,7 18,9
1,8 0,6 0,6 1,8 3,0 4,3 5,5 6,7 7 ,9 9,1 10,4 11,6 12,8 14,0 15,2 15,8 17,1 18,3 19,5
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
18 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart metric
1) The rated loads are the maximum lift capacities
MAIN BOOM LOAD RATINGS ON OUTRIGGERS as determined by operating radius, boom length
Extended and Down 360° or Retracted and Down Front/Rear and boom angle. The operating radius is the
5,3 m BOOM 8,8 m BOOM 12,2 m BOOM 15,2 m BOOM horizontal distance from a projection of the axis
of rotation to the supporting surface, before
Boom Rated Boom Rated Boom Rated Boom Rated loading, to the center of vertical hoist line or
Radius Angle Load Angle Load Angle Load Angle Load tackle with load applied.
(m) (deg) (kg) (deg) (kg) (deg) (kg) (deg) (kg)
1,8 65 13 600 – – – – – – 2) The rated loads shown on outriggers do not
2,4 57 11 680 – – – – – – exceed 85% of actual tipping. The rated loads
3,0 48 9640 67,5 7685 – – – – shown on rubber do not exceed 75% of actual
3,7 35 8180 62,5 7685 – – – – tipping. Retracted outrigger loads meet ASME
4,3 0 5940 57,5 7025 68 7030 – – B30.5-2011. These ratings are based on freely
4,9 – 1890 – 52,5 5630 64,5 5630 – – suspended loads with the crane leveled, standing
5,5 – – 47 4980 61,5 4980 68,5 4980 on a firm, uniform supporting surface. Practical
6,1 – – 41 4450 58 4445 66 4455 working loads depend on supporting surface, op-
6,7 – – 34 3900 54,5 3930 63 3940 erating radius and other factors affecting stabil-
ity. Hazardous surroundings, climatic conditions,
7,3 – – 25 3350 51 3390 60,5 3400
experience of personnel and proper training must
7,9 – – 0 2930 47 2980 58 3000
all be taken into account by the operator.
8,5 – – – – 43 2610 55 2630
9,1 – – – – 38 2320 52 2340 3) The weights of all load handling devices such
9,8 – – – – 32 2045 48,5 2095 as hooks, hook blocks, slings, etc., except the
10,4 – – – – 25 1865 45,5 1885 hoist rope, shall be considered part of the load.
11,0 – – – – 15,5 1680 42 1680 See above.
11,2 – – – – 0 1640 40,5 1625
11,6 – – – – – – 38 1545 4) Ratings on outriggers are for either outriggers
12,2 – – – – – – 34 1375 fully extended and down or fully retracted and
12,8 – – – – – – 29 1250 down. Ratings for outriggers fully retracted and
13,4 – – – – – – 23,5 1090 down will apply for any intermediate outrigger
14,3 – – – – – – 0 995 setting.
SIDE
15° 15°
30° 30°
FRONT REAR
SIDE
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove YB5515-2 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
19
Load chart metric
NOTES:
MAIN BOOM ON RUBBER JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY
CHART AND MAIN CAPACITY CHART.
Any Boom Length
Radius (m) Front Rating (kg) 360° Rating (kg) SHADED AREAS ARE GOVERNED BY STRUCTURAL
STRENGTH, DO NOT RELY ON TIPPING.
1 ,8 8090 7 07 0
2,4 6525 5230 OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING
3,0 521 0 4060 CHARTS AND DISREGARD OF INSTRUCTIONS IS
3,7 4440 3365 DANGEROUS AND VOIDS WARRANTY.
4,3 37 05 27 60
4,9 31 85 2425
5,5 2820 2015
6,1 251 0 1665 SIDE
6,7 2190 1380
7 ,3 1 890 1195 15° 15°
30° 30°
7 ,9 1 645 1005 FRONT REAR
8,5 1 495 885
9,1 1 330 7 45 SIDE
9,8 1 165 635
1 0,4 1045 530
1 1 ,0 940 445
1 1 ,2 905 405
1 1 ,6 855 37 0
1 2,2 770 300
1 2,8 690 230
1 3,4 620 1 90
1 4,3 525 –
1) The rated loads are the maximum lift capacities as determined 4) Ratings on outriggers are for either outriggers fully extended and
by operating radius, boom length and boom angle. The operating down or fully retracted and down. Ratings for outriggers fully re-
radius is the horizontal distance from a projection of the axis of tracted and down will apply for any intermediate outrigger setting.
rotation to the supporting surface, before loading, to the center of
vertical hoist line or tackle with load applied. 5) Ratings on rubber depend on 12.00R20 tire capacity, condition
of tires and proper inflation pressure (8,9 bar). Loads on rubber
2) The rated loads shown on outriggers do not exceed 85% of actual may be transported at a maximum speed of 4,0 km/h on a smooth,
tipping. The rated loads shown on rubber do not exceed 75% of hard, level surface with boom retracted to the shortest length pos-
actual tipping. Retracted outrigger loads meet ASME B30.5-2011. sible and centered over front. Do not use jib with crane on rubber.
These ratings are based on freely suspended loads with the crane
leveled, standing on a firm, uniform supporting surface. Practical 6) For operating radius not shown, use load rating of next larger
working loads depend on supporting surface, operating radius and radius.
other factors affecting stability. Hazardous surroundings, climatic
conditions, experience of personnel and proper training must all be 7) The maximum deck load only is 7260 kg. Combined boom and
taken into account by the operator. deck loads are not permitted on rubber.
3) The weights of all load handling devices such as hooks, hook 8) Do not induce any external side loads to boom or jib.
blocks, slings, etc., except the hoist rope, shall be considered part
of the load. See above.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
20 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Working range DIN/ISO
20,7 3
19,51
18,29
17 ,07
15,85
14,63
M
OO
13,41
MB
1 2 ,5
12,19
10,97 69°
65°
1 0,4
60°
9,7 5 55°
55
M
50°
OO
45°
MB
8,53
40°
7 ,9
35°
7,32
30°
M
6,10 25°
OO
MB
20°
4,88
5,4
15°
10 °
3,66
5°
2,44 0°
1,22
0
-2,44 0 2,44 4,88 7,32 9,7 5 12,19 14,63 17,07
-1,22 1,22 3,66 6,10 8,53 10,97 13,41 15,85
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove YB5515-2 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
21
Load chart DIN/ISO
SIDE
15° 15°
30° 30°
FRONT REAR
SIDE
22
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart DIN/ISO
NOTES:
JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY
MAIN BOOM ON RUBBER CHART AND MAIN CAPACITY CHART.
Any Boom Length
SHADED AREAS ARE GOVERNED BY STRUCTURAL
Radius (m) Front Rating (kg) 360° Rating (kg) STRENGTH, DO NOT RELY ON TIPPING.
1 ,8 807 0 7 115
OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING
2,4 6620 5 1 90 CHARTS AND DISREGARD OF INSTRUCTIONS IS
3,0 5350 4 41 0 DANGEROUS AND VOIDS WARRANTY.
3,7 4330 3 7 65
4,3 3630 297 0
4,5 3425 27 80
4,9 31 65 257 0
5,5 2630 21 45
6,1 2225 1820
6,7 1905 1565
7 ,0 17 85 1465
7 ,3 17 05 1400
7 ,9 1500 1225
8,5 1330 107 5
9,1 1185 950
9,4 1120 890
9,8 1060 825
1 0,4 950 7 35
1 1 ,0 855 650
1 1 ,6 775 585
1) The rated loads are the maximum lift capacities 5) Ratings on rubber depend on 12.00R20 tire capac-
as determined by operating radius, boom length ity, condition of tires and proper inflation pressure
and boom angle. The operating radius is the (8,9 bar). Loads on rubber may be transported at a
horizontal distance from a projection of the axis of maximum speed of 4,0 km/h on a smooth, hard, level
rotation to the supporting surface, before loading, surface with boom retracted to the shortest length
to the center of vertical hoist line or tackle with possible and centered over front. Do not use jib with
load applied. crane on rubber.
2) The rated loads shown on outriggers do not ex- 6) For operating radius not shown, use load rating of
ceed 80% of actual tipping. The rated loads shown next larger radius.
on rubber do not exceed 75% of actual tipping.
These ratings are based on freely suspended loads 7) The maximum deck load only is 7260 kg. Combined
with the crane leveled, standing on a firm, uniform boom and deck loads are not permitted on rubber.
supporting surface. Practical working loads depend
on supporting surface, operating radius and other 8) Do not induce any external side loads to boom or jib.
factors affecting stability. Hazardous surroundings,
climatic conditions, experience of personnel and
proper training must all be taken into account by
the operator.
Grove YB5515-2 23
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Working range DIN/ISO
1,8 0,6 0,6 1,8 3,0 4,3 5,5 6,7 7,9 9,1 10,4 11,6 12,8 14,0 15,2 15,8 17,1 18,3 19,5
2,4 1,2 1,2 2,4 3,7 4,9 6,1 7,3 8,5 9,8 11,0 12,2 13,4 14,6 15,2 16,5 17,7 18,9
23,8 23,8
23,2 23,2
22,6 22,6
21,9 21,9
21,3 21,3
20,7 69° 20,7
H 4 OOM
JIB
20,1 20,1
19,5 19,5
,6 m
WIT8 m B
18,9 18,9
18,3 18,3
17,7 17,7
19,
17,1 17,1
16,5 16,5
OM
15,8 15,8
O
14,0 14,0
M 1
11,6 11,6
11,0 40° 11,0
12,2
9,8 9,8
OO
8,5 8,5
7,9 25° 7,9
8,8
7,3 7,3
6,7 20°
6,7
M
5,5 5,5
TB
4,3 4,3
3,7 5° 3,7
5,3
3,0 3,0
2,4 0° 2,4
1,8 1,8
1,2 1,2
0,6 0,6
0 0
2,4 1,2 1,2 2,4 3,7 4,9 6,1 7,3 8,5 9,8 11,0 12,2 13,4 14,6 15,2 16,5 17,7 18,9
1,8 0,6 0,6 1,8 3,0 4,3 5,5 6,7 7,9 9,1 10,4 11,6 12,8 14,0 15,2 15,8 17,1 18,3 19,5
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
24 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Load chart DIN/ISO
1) The rated loads are the maximum lift capacities
MAIN BOOM LOAD RATINGS ON OUTRIGGERS as determined by operating radius, boom length
Extended and Down 360° or Retracted and Down Front/Rear and boom angle. The operating radius is the
horizontal distance from a projection of the axis
5,3 m BOOM 8,8 m BOOM 1 2,2 m BOOM 1 5,2 m BOOM of rotation to the supporting surface, before
Boom Rated Boom Rated Boom Rated Boom Rated loading, to the center of vertical hoist line or
Radius Angle Load Angle Load Angle Load Angle Load tackle with load applied.
(m) (deg) (kg) (deg) (kg) (deg) (kg) (deg) (kg)
1 ,8 65 1 3 600 – – – – – – 2) The rated loads shown on outriggers do not
2,4 57 1 3 37 5 – – – – – – exceed 80% of actual tipping. The rated loads
3,0 48 1 1 7 25 67 ,5 7 685 – – – – shown on rubber do not exceed 75% of actual tip-
3,7 35 1 0 1 25 62,5 7 685 – – – – ping. These ratings are based on freely suspended
4,3 0 5940 57 ,5 7 685 68 7 21 0 – – loads with the crane leveled, standing on a firm,
uniform supporting surface. Practical working
4,9 – 1 80 9– 52,5 7 300 64,5 657 5 – –
loads depend on supporting surface, operat-
5,5 – – 47 6335 61 ,5 597 0 68,5 5450 ing radius and other factors affecting stability.
6,1 – – 41 5285 58 51 7 5 66 4905 Hazardous surroundings, climatic conditions,
6,7 – – 34 4500 54,5 4535 63 4325 experience of personnel and proper training must
7 ,3 – – 25 3885 51 3925 60,5 3855 all be taken into account by the operator.
7 ,9 – – 0 3240 47 3450 58 3420
8,5 – – – – 43 3040 55 3035 3) The weights of all load handling devices such
9,1 – – – – 38 27 20 52 27 20 as hooks, hook blocks, slings, etc., except the
9,8 – – – – 32 2405 48,5 241 5 hoist rope, shall be considered part of the load.
10,4 – – – – 25 21 7 5 45,5 2195 See above.
11 ,0 – – – – 15,5 1970 42 1995
11 ,2 – – – – 0 1910 40,5 1935 4) Ratings on outriggers are for either outriggers
11 ,6 – – – – – – 38 1820 fully extended and down or fully retracted and
12,2 – – – – – – 34 1660 down. Ratings for outriggers fully retracted and
12,8 – – – – – – 29 1525 down will apply for any intermediate outrigger
setting.
13,4 – – – – – – 23,5 1400
14,3 – – – – – – 0 1240 5) Ratings on rubber depend on 12.00R20 tire
capacity, condition of tires and proper inflation
pressure (8,9 bar). Loads on rubber may be trans-
MAIN BOOM LOAD RATINGS ON OUTRIGGERS ported at a maximum speed of 4,0 km/h on a
Retracted and Down 360° smooth, hard, level surface with boom retracted
to the shortest length possible and centered over
5,3 m BOOM 8,8 m BOOM 1 2,2 m BOOM 1 5,2 m BOOM front. Do not use jib with crane on rubber.
Boom Rated Boom Rated Boom Rated Boom Rated
Radius Angle Load Angle Load Angle Load Angle Load 6) For operating radius not shown, use load rat-
(m) (deg) (kg) (deg) (kg) (deg) (kg) (deg) (kg) ing of next larger radius.
1 ,8 65 13 600 – – – – – –
2,4 57 11 350 – – – – – – 7) The maximum deck load only is 7260 kg. Com-
bined boom and deck loads are not permitted on
3,0 48 81 60 67 ,5 7 21 0 – – – –
rubber.
3,7 35 5955 62,5 5480 – – – –
4,3 0 4585 57 ,5 4490 68 41 65 – – 8) Do not induce any external side loads to boom
4,9 – – 52,5 37 65 64,5 3525 – – or jib.
5,5 – – 47 31 85 61 ,5 3030 68,5 287 0
6,1 – – 41 2680 58 2630 66 2505
6,7 – – 34 2290 54,5 2305 63 2205
7 ,3 – – 25 1 97 0 51 2025 60,5 1955
7 ,9 – – 0 1715 47 1770 58 17 40
8,5 – – – – 43 1 550 55 1540
NOTES:
9,1 – – – – 38 1 365 52 1360
SHADED AREAS ARE GOVERNED BY
9,8 – – – – 32 1 1 85 48,5 11 85 STRUCTURAL STRENGTH, DO NOT RELY ON
10,4 – – – – 25 1050 45,5 1055 TIPPING.
11,0 – – – – 15,5 930 42 940
11,2 – – – – 0 895 40,5 905 OPERATION OF THIS EQUIPMENT IN EXCESS
11,6 – – – – – – 38 835 OF RATING CHARTS AND DISREGARD OF
12,2 – – – – – – 34 7 45 INSTRUCTIONS IS DANGEROUS AND VOIDS
12,8 – – – – – – 29 665 WARRANTY.
13,4 – – – – – – 23,5 595
14,3 – – – – – – 0 500
SIDE
15° 15°
30° 30°
FRONT REAR
SIDE
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove YB5515-2 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
25
Load chart DIN/ISO
NOTES:
MAIN BOOM ON RUBBER JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY
CHART AND MAIN CAPACITY CHART.
Any Boom Length
Radius (m) Front Rating (kg) 360° Rating (kg) SHADED AREAS ARE GOVERNED BY STRUCTURAL
STRENGTH, DO NOT RELY ON TIPPING.
1 ,8 8090 7 07 0
2,4 6525 5230 OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING
3,0 521 0 4060 CHARTS AND DISREGARD OF INSTRUCTIONS IS
3,7 4440 3365 DANGEROUS AND VOIDS WARRANTY.
4,3 3640 2685
4,9 3080 2365
5,5 2620 1945
6,1 221 0 1620 SIDE
6,7 1880 1365
7 ,3 1615 1160 15° 15°
7 ,9 1395 990 30°
FRONT REAR
30°
8,5 1265 885
9,1 1120 7 45
9,8 97 5 635 SIDE
10,4 865 530
11 ,0 770 445
11 ,2 7 40 405
11 ,6 7 00 37 0
12,2 620 300
12,8 550 230
13,4 490 190
14,3 405 –
1) The rated loads are the maximum lift capacities as determined down or fully retracted and down. Ratings for outriggers fully re-
by operating radius, boom length and boom angle. The operating tracted and down will apply for any intermediate outrigger setting.
radius is the horizontal distance from a projection of the axis of
rotation to the supporting surface, before loading, to the center of 5) Ratings on rubber depend on 12.00R20 tire capacity, condition
vertical hoist line or tackle with load applied. of tires and proper inflation pressure (8,9 bar). Loads on rubber
may be transported at a maximum speed of 4,0 km/h on a smooth,
2) The rated loads shown on outriggers do not exceed 80% of actual hard, level surface with boom retracted to the shortest length pos-
tipping. The rated loads shown on rubber do not exceed 75% of sible and centered over front. Do not use jib with crane on rubber.
actual tipping. These ratings are based on freely suspended loads
with the crane leveled, standing on a firm, uniform supporting 6) For operating radius not shown, use load rating of next larger
surface. Practical working loads depend on supporting surface, radius.
operating radius and other factors affecting stability. Hazardous
surroundings, climatic conditions, experience of personnel and 7) The maximum deck load only is 7260 kg. Combined boom and
proper training must all be taken into account by the operator. deck loads are not permitted on rubber.
3) The weights of all load handling devices such as hooks, hook 8) Do not induce any external side loads to boom or jib.
blocks, slings, etc., except the hoist rope, shall be considered part
of the load. See above.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
26 The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
Transportation and lifting data
NO. / UNIT
INDICAT ED ON ADJACENT CHART. USE OF FITTINGS FOR
TIE DOWN
TIE DOWN
TRANSPORTATION AND LIFTING DATA - YB5515-2
TOW
LIFT
IS PROHIBITED. FITTING CAPACITIES ARE MAXIMUM
LIFT LIFT LIFT TOW FORE
A LLOWABLE LOADS PER INDIVIDUAL FITTING.
2. RIGGING
1. LIFTINGPERSONNEL SHALL
OF ENTIRE CRANE ORBE RESPONSIBLE
MAJOR FOR
CRANE ASSEMBLIES & AFT SIDE DOWN
MUST BE ACCOMPLISHED BY UTILIZING SPECIFIC
PROPER SELECTION A ND PLACEMENT OF ALL SLINGS FITTINGS BOOM CWT CAPACITY-TONNES
9.1 27.2 [TONS] 0.9
27.2 27.2
A ND INDICAT
LOADED ON ADJACENT
HANDLING CHART. USE OF FITTINGS FOR
DEVICES. A 4 X X X
[10] [30]TIE [30]
DOWN [1] [30]
TIE DOWN
FITTING
PURPOSES OTHER THAN THOSE DESIGNATED ON CHART
3. DIMENSIONS A ND WEIGHTS SHOWN ARE ESTIMATED FOR
TOW
LIFT
IS PROHIBITED. FITTING CAPACITIES ARE MAXIMUM
LARGEST CONFIGURATION AVAILABLE. WEIGHTS
A LLOWABLE LOADS PER INDIVIDUAL FITTING. DO NOT
B 4
LIFT LIFT LIFT TOW
X 1.8 FORE
INCLUDE
2. RIGGINGBOOM EXTENSION
PERSONNEL SHALLABE
ND OR JIB, UNLESS
RESPONSIBLE FOR [2] & AFT SIDE DOWN
OTHERW
PROPERISE INDICATED.
SELECTION A ND PLACEMENT OF ALL SLINGS 9.1 27.2 27.2 0.9 27.2
4. RIGGING PERSONNEL
A ND LOAD HANDLING SHALL VERIFY DIMENSIONS AS
DEVICES. A 4 X X X
[10] [30] [30] [1] [30]
REQUIRED FORACLEARANCE.
3. DIMENSIONS ND WEIGHTS SHOWN ARE ESTIMATED FOR
5. DOLARGEST
NOT USE CONFIGURATION
COUNTERW EIGHTAVAILABLE. WEIGHTS DOOR
LIFT LOCATIONS NOTBOOM B 4 X 1.8
SLINGINCLUDE
POINTBOOM EXTENSION
FOR LIFTING ORATIE
ND DOWN
OR JIB, UNLESS
OF ENTIRE CRANE. [2]
OTHERW ISE INDICATED.
5701
4. RIGGING PERSONNEL SHALL mm DIMENSIONS AS
VERIFY
REQUIRED FOR CLEARANCE. (224.4") 6791 mm
B USE COUNTERW EIGHT LIFT LOCATIONS OR BOOM B (385.5")
5. DO NOT
SLING POINT FOR LIFTING OR TIE DOWN OF ENTIRE CRANE.
5701 mm
(224.4") 6791 mm
B B (385.5")
1671 kg 4x Ø76.2 mm
41' BOOM WEIGHT C.G.2642 mm (3") 2495 mm
(3685 lb) (104") (98.2")
5567 mm
1671 kg (219.2") 4x Ø76.2 mm
41' BOOMB
WEIGHT C.G.2642 mm B (3") A 2495 mm
(3685 lb) (104") (98.2") A
5567 mm
B
(219.2") B A C.G.
G.V.W. 14 436 kg 1128 mm A
(31,804 lb) (44.4")
C.G.
G.V.W. 14 436 kg 4597 mm
1128 mm
1987 kg C.G. 2510 mm (31,804 lb) (181.0")
50' BOOM WEIGHT (44.4")
(4381 lb) (98.8") TOTAL UNIT W/ 50' BOOM
G7 4597 mm AND BOOM EXTENSION 80055769
1987 kg C.G. 2510 mm (181.0")
50' BOOM WEIGHT
G7
(4381 lb) (98.8") TOTAL UNIT W/ 50' BOOM AND BOOM EXTENSION 80055769
1. Maximum travel speed with any or all loads - 4.0 km/h (2.5 MPH)
1.2.Maximum
Loads to betravel speedon
transported with any or
smooth allfirm
level loads - 4.0 km/h
surfaces only. (2.5 MPH)
2.3.Loads
Boom tomustbe be
transported onin
retracted and smooth level firm
center forward surfaces only.
position.
3.4.Boom must be retracted
Any combination or total ofand in 1center
areas & 2 mayforward
be used.position.
4.5.Any
Lifting is not permitted
combination when
or total ofcarry
areas deck
1 & is2 loaded
may beexcept
used.for loading
and unloading carry deck.
5. Lifting is not permitted when carry deck is loaded except for loading
6. Rated pick and carry loads may be transported on deck area 1
and unloading carry deck.
provided the load is cribbed directly on the frame rails.
6. Rated pick and carry loads may be transported on deck area 1
provided the load is cribbed directly on the frame rails.
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE.
Grove YB5515-2
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
27
Rigging chart
RIGGING CHART
1-PART 4-PART
0-7500 lb 0-30,000 lb
RIGGING CHART
1 -PART 4-PART
0-3400 kg 0-13 610 kg
RIGGING CHART
1-PART 4-PART
THIS CHART IS ONLY A GUIDE
0-7500 lbAND
SHOULD0-30,000
NOT BElbUSED TO OPERATE THE CRANE.
The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
28 WIRE ROPE: 9/16" Diameter 6 X 19 Bright
Minimum required breaking strength = 37,000 lb
Transmission
Grove YB5515-2 29
Notes
30
Notes
Grove YB5515-2 31
Manitowoc Cranes
Regional headquarters
Americas Europe, Middle East, Africa China Greater Asia-Pacific
Manitowoc, Wisconsin, USA Dardilly, France Shanghai, China Singapore
Tel: +1 920 684 6621 Tel: +33 (0)4 72 18 20 20 Tel: +86 21 6457 0066 Tel: +65 6264 1188
Fax: +1 920 683 6277 Fax: +33 (0)4 72 18 20 00 Fax: +86 21 6457 4955 Fax: +65 6862 4040
Shady Grove, Pennsylvania, USA
Tel: +1 717 597 8121
Fax: +1 717 597 4062
Regional offices
Americas
Brazil
China
Beijing
Factories This document is non-contractual. Constant improvement and engineering progress
make it necessary that we reserve the right to make specification, equipment, and
Brazil price changes without notice. Illustrations shown may include optional equipment
Alphaville Chengdu and accessories and may not include all standard equipment.
Passo Fundo
Mexico Guangzhou
China
Monterrey Xian
TaiAn
Chile
Zhangjiagang
Santiago Greater Asia-Pacific
France
Australia
Charlieu
Europe, Middle East, Brisbane
Moulins
Africa Melbourne
Germany
France Sydney
Wilhelmshaven
Baudemont India
India
Cergy Chennai
Pune
Decines Delhi
Italy
Germany Hyderabad
Niella Tanaro
Langenfeld Pune
Portugal
Italy Korea
Baltar
Lainate Seoul
Fânzeres
Netherlands Philippines
USA
Breda Makati City
Manitowoc
Poland Singapore
Port Washington
Warsaw
Shady Grove
Portugal
Baltar
Russia
Moscow
South Africa
Johannesburg
U.A.E.
Dubai
U.K.
Buckingham
©2013 Manitowoc
Form No. YB5515-2 PG
Part No. 13-013 /2M /1213 www.manitowoccranes.com