Professional Documents
Culture Documents
19SE201 - Advanced Steel Design: M. Thiruvannamalai, AP/Civil, MSEC, Sivakasi
19SE201 - Advanced Steel Design: M. Thiruvannamalai, AP/Civil, MSEC, Sivakasi
M. Thiruvannamalai, AP/Civil,
MSEC, Sivakasi
Unit IIDesign
– Design of Connections
of Connections
Class 3
Learning Outcome:
Design the unstiffened seating angle
connection
Connections in Steel Structures
Unit II – Design of Connections
Splices (Beam/Column)
UNSTIFFENED
Clip and seat angle connection –
(Beam – Column Connections)
Beam – Column Connections
Unit II – Design of Connections
Clip and seat angle connection - UNSTIFFENED
Seat angle
Unit connection
II – Design of– Connections
UNSTIFFENED
1. A seat angle having length equal to width of
beam is selected
2. Outstanding length of angle > ‘b’
3. Bearing Length ‘b’ = (R/tw)(fy/γmo)
4. Also, bearing length on beam b1 = b-(tf+r)
5. The distance of end bearing to seat angle
b2=b1+C-((ta+ra)
1. Mu = R(b2/b1)(b2/2)
2. Moment capacity and shear capacity of seat
angle should be checked.
Worked Example 1
Unit II – Design of Connections
Clip and seat angle connection – UNSTIFFENED
Problem:
Design a seat angle connection to transfer a load of
100 kN from a beam of ISMB300 onto a column of
SC200. Assume M20 bolts of 4.6 grade and Fe410 grade
of beam and column.
Worked Example 1
Unit II – Design of Connections
Worked Example 1
Unit II – Design of Connections
Worked Example 1
Unit II – Design of Connections
Worked Example 1
Unit II – Design of Connections