Professional Documents
Culture Documents
Data\J9050000_2342216141DDW670_GB\2342216141\GB01COV_HT-DDW670-U.fm]
GB01COV_HT-DDW670-U.book Page 1 Wednesday, July 13, 2005 1:45 PM
2-342-216-14(1)
Home Theatre
System
Operating Instructions
Owner’s Record
The model and serial numbers are located on the rear of the unit. Record the serial
number in the space provided below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No. Serial No.
HT-DDW670
©2005 Sony Corporation
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB02REG_HT-DDW670-U.fm] masterpage:Left
2GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB02REG_HT-DDW670-U.fm] masterpage:Right
R L
+ + +
R L
S
CENTER FRONT
2-XXX-XXX-XX AA
Area code
3GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB01COV_HT-DDW670-U TOC.fm] masterpage:Left
Table of Contents
4GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB03CON_HT-DDW670-U.fm] masterpage:Right
Getting Started
Getting Started
1: Check how to hookup your components
Steps 1a through 1b beginning on page 7 describe how to hook up your components to this receiver.
Before you begin, refer to “Connectable components” below for the pages which describe how to
connect each component.
After hooking up all your components, proceed to “2: Connecting the antennas” (page 10).
Connectable components
Component to be connected Page
DVD player
With digital audio outputa) 7
With analog audio output onlyb) 9
Satellite tuner
With analog audio output onlyb) 9
Super Audio CD/CD player
With digital audio outputa) 8
With analog audio output onlyb) 9
VCR 9
a) Model with a DIGITAL OPTICAL OUTPUT or DIGITAL COAXIAL OUTPUT jack, etc.
b) Model equipped only with AUDIO OUT L/R jacks, etc.
continued
5GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB03CON_HT-DDW670-U.fm] masterpage:Left
Required cords
The hookup diagrams on the subsequent pages assume the use of the following optional connection
cords (A to C) (not supplied unless indicated).
A Audio cord C Coaxial digital cord (supplied)
White (L) Orange
Red (R)
B Optical digital cord
Notes
• Turn off the power to all components before making any connections.
• Be sure to make connections firmly to avoid hum and noise.
• When connecting an audio cord, be sure to match the color-coded pins to the appropriate jacks on the components:
white (left, audio) to white; and red (right, audio) to red.
• When connecting optical digital cords, insert the cord plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
6GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB03CON_HT-DDW670-U.fm] masterpage:Right
Getting Started
Hooking up a DVD player
For details on the required cords (A–C), see page 6.
DVD player
OUTPUT
AUDIO
OUT
OUTPUT L
DIGITAL
COAXIAL
C A
DIGITAL ANTENNA
OPTICAL
SA-CD/
CD
IN
AM
DVD IN
COAXIAL
L L
AUDIO
OUT
R R
AUDIO IN AUDIO IN AUDIO IN AUDIO IN SUB
SA-CD/CD DVD VIDEO 2 VIDEO 1 WOOFER
continued
7GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB03CON_HT-DDW670-U.fm] masterpage:Left
DIGITAL ANTENNA
OPTICAL
SA-CD/
CD
IN
AM
DVD IN
COAXIAL
L L
AUDIO
OUT
R R
AUDIO IN AUDIO IN AUDIO IN AUDIO IN SUB
SA-CD/CD DVD VIDEO 2 VIDEO 1 WOOFER
B A
DIGITAL OUTPUT
OPTICAL LINE
OUT
L
Tip
All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz and 96 kHz sampling frequencies.
Note
The sound is not output when you play a Super Audio CD on the Super Audio CD player connected to the
SA-CD/CD OPTICAL IN jack on this receiver. Connect to the analog input jacks (SA-CD/CD IN jacks). Refer to
the operating instructions supplied with the Super Audio CD player.
8GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB03CON_HT-DDW670-U.fm] masterpage:Right
Getting Started
For details on the required cords (A–C), see page 6.
OUTPUT OUTPUT
AUDIO AUDIO
OUT OUT
L L
R R
A
A
DIGITAL ANTENNA
OPTICAL
SA-CD/
CD
IN
AM
DVD IN
COAXIAL
L L
AUDIO
OUT
R R
AUDIO IN AUDIO IN AUDIO IN AUDIO IN SUB
SA-CD/CD DVD VIDEO 2 VIDEO 1 WOOFER
A A
OUTPUT OUTPUT
LINE AUDIO
OUT
L
L
R
R
9GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB03CON_HT-DDW670-U.fm] masterpage:Left
AM loop antenna
(supplied)
FM wire antenna
(supplied)
DIGITAL ANTENNA
OPTICAL
SA-CD/
CD
IN
AM
DVD IN
COAXIAL
L L
AUDIO
OUT
R R
AUDIO IN AUDIO IN AUDIO IN AUDIO IN SUB
SA-CD/CD DVD VIDEO 2 VIDEO 1 WOOFER
10GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB03CON_HT-DDW670-U.fm] masterpage:Right
3: Connecting speakers
Getting Started
Connect your speakers to the receiver. This receiver allows you to use a 5.1 channel speaker system.
To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a
center speaker, and two surround speakers) and a sub woofer (5.1 channel).
Sub woofer
Tips
• Since the sub woofer does not emit highly directional signals, you can place it wherever you want.
• For greater flexibility in the positioning of the speakers, use the optional WS-FV11 or WS-FV10D floor stand
(available only in certain countries).
• You can also install the front and surround speakers on the wall (page 13).
Note
Connect the long speaker connecting cords to the surround speaker terminals and the short speaker connecting cords
to the front and center speaker terminals.
Note
Be sure to attach the supplied foot pads to the sub woofer as well.
continued
11GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB03CON_HT-DDW670-U.fm] masterpage:Left
Required cords
A Speaker cords (supplied) B Monaural audio cord (not supplied)
(+) Black
(–)
E e E e E e
A A A
R L R L
+ + + +
AUDIO
OUT
SUB SUB R L R L
WOOFER WOOFER SURROUND CENTER FRONT
SPEAKERS
* A A
E e E e
Sub woofer Surround speaker Surround speaker
(Right) (Left)
* If you have an additional active subwoofer, connect it to SUB WOOFER AUDIO OUT jack.
12GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB03CON_HT-DDW670-U.fm] masterpage:Right
Notes
Installing the speakers on the • Use screws that are suitable for the wall material and
wall strength. As a plaster board wall is especially fragile,
Getting Started
attach the screws securely to a beam and fasten them
You can install your front and surround speakers to the wall. Install the speakers on a vertical and flat
on the wall. wall where reinforcement is applied.
1 Prepare screws (not supplied) that are
• Contact a screw shop or installer regarding the wall
material or screws to be used.
suitable for the hole on the back of
• Sony is not responsible for accident or damage
each speaker. See the illustrations
caused by improper installation, insufficient wall
below.
strength or improper screw installation, natural
calamity, etc.
more than 4 mm
(5/32 inch)
4.6 mm
(3/16 inch)
10 mm
(13/32 inch)
5 to 7 mm
(7/32 to 9/32 inch)
4.6 mm
(3/16 inch)
10 mm
(13/32 inch)
13GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB03CON_HT-DDW670-U.fm] masterpage:Left
AC power cord
14GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB03CON_HT-DDW670-U.fm] masterpage:Right
Getting Started
You can use the SET UP menu to set the
distance and location of the speakers connected B
to this receiver. A A
30˚ 30˚
1 Press ?/1 to turn on the receiver.
100˚-120˚ 100˚-120˚
2 Press MAIN MENU repeatedly to select
“ SET UP ”. C C
5 Repeat steps 3 and 4 until you have set x SL SR DIST. X.X m (XX ft.)*
(Surround speaker distance)
all of the items that follow.
Initial setting: 3.0 m (10 ft)
Lets you set the distance from your listening position
Speaker setup parameters to the surround speakers. Surround speaker distance
should be set from a distance equal to the front speaker
The initial setting is underlined. distance (A) to a distance 4.5 meters (15 feet) closer to
x L R DIST. X.X m (XX ft.)* your listening position (C).
(Front speaker distance) If both surround speakers are not placed an equal
distance from your listening position, set the distance
Initial setting: 3.0 m (10 ft)
to the closest speaker.
Lets you set the distance from your listening position
to the front speakers (A). You can adjust from 1.0
meter to 7.0 meters (3 to 23 feet) in 0.1 meter (1 foot) * For models of area code U, CA, “XX ft.” is
steps. displayed.
continued
15GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB03CON_HT-DDW670-U.fm] masterpage:Left
Tip • SIDE/LO
The receiver lets you to input the speaker position in Select if the location of your surround speakers
terms of distance. However, it is not possible to set the corresponds to section A and C.
center speaker further than the front speakers. Also, the • SIDE/HI
center speaker cannot be set more than 1.5 meters Select if the location of your surround speakers
(5 feet) closer than the front speakers. corresponds to section A and D.
Likewise, the surround speakers cannot be set further • BEHD/LO
away from the listening position than the front Select if the location of your surround speakers
speakers. And they can be no more than 4.5 meters corresponds to section B and C.
(15 feet) closer.
• BEHD/HI
This is because incorrect speaker placement is not
Select if the location of your surround speakers
conducive to the enjoyment of surround sound.
corresponds to section B and D.
Please note that, setting the speaker distance closer than
the actual location of the speakers will cause a delay in Tip
the output of the sound from that speaker. In other Surround speaker position is designed specifically for
words, the speaker will sound like it is further away. implementation of the Cinema Studio EX modes.
For example, setting the center speaker distance 1–2 For other sound fields, speaker position is not so
meters (3-6 feet) closer than the actual speaker position critical. Those sound fields were designed under the
will create a fairly realistic sensation of being “inside” premise that the surround speakers would be located
the screen. If you cannot obtain a satisfactory surround behind the listening position, but presentation remains
effect because the surround speakers are too close, fairly consistent even with the surround speakers
setting the surround speaker distance closer (shorter) positioned at a rather wide angle. However, if the
than the actual distance will create a larger sound stage. speakers are pointing toward the listener from the
Adjusting these parameter while listening to the sound immediate left and right of the listening position, the
often results in much better surround sound. Give it a surround effects becomes unclear unless set to
try! “SIDE/LO” or “SIDE/HI”.
Nevertheless, each listening environment has many
x SL SR XXXX/XX
variables, such as wall reflections, and you may obtain
(Surround speaker position)
better results using “BEHD/HI” if your speakers are
Lets you specify the location of your surround speakers located high above the listening position, even if they
for proper implementation of the surround effects in are to the immediate left and right.
the Cinema Studio EX modes (page 26). Therefore, although it may result in a setting contrary
to the above explanation, we recommend that you
playback multi channel surround encoded software and
select the setting that provides a good sense of
spaciousness and that best succeeds in forming a
100˚
120˚ cohesive space between the surround sound from the
surround speakers and the sound of the front speakers.
If you are not sure which sounds best, select
“BEHD/LO” or “BEHD/HI” and then use the speaker
A A
distance parameter and speaker level adjustments to
B B
obtain proper balance.
D D
60
C C
30
16GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB03CON_HT-DDW670-U.fm] masterpage:Right
Getting Started
— TEST TONE
17GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB04BSC_HT-DDW670-U.fm] masterpage:Left
18GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB04BSC_HT-DDW670-U.fm] masterpage:Right
Amplifier Operation
FM or AM band.
antennas to the receiver (see page 10).
The last received station is tuned in.
Tip
The tuning scale differs depending on the area code as Tip
shown in the following table. For details on area codes, You can also use FM or AM on the receiver.
see page 3.
2 Press D.TUNING.
Area code FM AM
U, CA 100 kHz 10 kHz*
3 Press the numeric buttons to enter the
frequency.
CEL, CEK, SP, AU 50 kHz 9 kHz
Example 1: FM 102.50 MHz
MX 50 kHz 10 kHz Press 1 b 0 b 2 b 5 b 0
E51 50 kHz 10 kHz* Example 2: AM 1,350 kHz
* The AM tuning scale can be changed (see page 41). Press 1 b 3 b 5 b 0
(You do not have to enter the last “0” when
Automatic tuning the tuning scale is set to 10 kHz.)
If you have tuned in an AM station, adjust
If you do not know the frequency of the station the direction of the AM loop antenna for
you want, you can let the receiver scan all optimum reception.
available stations in your area.
If you cannot tune in a station
1 Press FM or AM to select the FM or AM
and the entered numbers flash
band.
Make sure you have entered the right frequency.
The last received station is tuned in.
If not, repeat steps 2 and 3. If the entered
2 Press TUNING + or TUNING –. numbers still flash, the frequency is not used in
Press TUNING + to scan from low to high; your area.
press TUNING – to scan from high to low.
The receiver stops scanning whenever a
station is received.
Tip
If “STEREO” flashes in the display and the FM stereo
reception is poor, press FM MODE to change to
monaural (MONO). You will not be able to enjoy the
stereo effect, but the sound will be less distorted. To
return to stereo mode, press FM MODE again.
19GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB04BSC_HT-DDW670-U.fm] masterpage:Left
20GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB04BSC_HT-DDW670-U.fm] masterpage:Right
Amplifier Operation
2 Press PRESET TUNING + or PRESET This receiver also allows you to use RDS (Radio
TUNING – repeatedly to select the Data System), which enables radio stations to
preset station you want. send additional information along with the
Each time you press the button, you can regular program signal. You can also display
select the preset station as follows: RDS information.
tA1yA2y...yA0yB1yB2y...yB0T Notes
• RDS is operable only for FM stations.
tC0y...yC2yC1T • Not all FM stations provide RDS service, nor do they
provide the same types of services. If you are not
Using the remote familiar with the RDS services in your area, check
with your local radio stations for details.
1 Press TUNER repeatedly to select the FM or
AM band.
Receiving RDS broadcasts
2 Press PRESET +/– repeatedly to select the
preset station you want. Simply select a station on the FM band
using automatic tuning (page 19), direct
To select the preset station tuning (page 19), or preset tuning
directly (page 21).
Press the numeric buttons on the remote. When you tune in a station that provides RDS
The preset station of the selected number in the services, the RDS indicator lights up and the
current memory page is tuned in. Press SHIFT program service name appears in the display.
repeatedly on the remote to change the memory Note
page. RDS may not work properly if the station you tuned to
is not transmitting the RDS signal properly or if the
signal strength is weak.
continued
21GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB04BSC_HT-DDW670-U.fm] masterpage:Left
22GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB04BSC_HT-DDW670-U.fm] masterpage:Right
Amplifier Operation
You can check the sound field etc. by changing
the information in the display.
Press DISPLAY repeatedly.
Each time you press DISPLAY, the display will
change cyclically as follows.
Index name of the input* t Selected input t
Sound field currently applied
When the tuner is selected
Program Service name** or preset station name*
t Frequency t Program Type indication**
t Radio Text indication** t Current Time
indication (in 24-hour system)** t Sound field
currently applied
* Index name appears only when you have assigned
one to the input or preset station (page 32). Index
name does not appear when only blank spaces have
been entered, or it is the same as the input name.
** During RDS reception only. (Models of area code
CEL, CEK only. See page 21.)
23GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB04BSC_HT-DDW670-U.fm] masterpage:Left
24GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB05SND_HT-DDW670-U.fm] masterpage:Right
continued
25GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB05SND_HT-DDW670-U.fm] masterpage:Left
26GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB05SND_HT-DDW670-U.fm] masterpage:Right
x HALL
Reproduces the acoustics of a classical concert hall.
x JAZZ (JAZZ CLUB)
Reproduces the acoustics of a jazz club.
27GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB06ADV_HT-DDW670-U.fm] masterpage:Left
28GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB06ADV_HT-DDW670-U.fm] masterpage:Right
x CTR XXX dB
(Center speaker level) Resetting sound fields to the
initial settings
x SUR.L. XXX dB
(Surround speaker (left) level) Use the buttons on the receiver for the operation.
x SUR.R. XXX dB 1 Press ?/1 to turn off the power.
(Surround speaker (right) level)
2 While holding down 2CH, press
x S.W. XXX dB ?/1.
(Sub woofer level)
“SF. CLR.” appears in the display and all
Initial setting: 0 dB sound fields are reset to the initial setting.
You can adjust from –10 dB to +10 dB in 1 dB steps.
29GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB06ADV_HT-DDW670-U.fm] masterpage:Left
30GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB06ADV_HT-DDW670-U.fm] masterpage:Right
x DEC. XXXX
(Digital audio input decoding priority)
Lets you specify the input mode for the digital signal
input to the DIGITAL IN jacks.
• AUTO
Automatically switches the input mode between
DTS, Dolby Digital, or PCM.
• PCM
PCM signals are given priority (to prevent the
interruption when playback starts). Even when other
signals are input, the sound is output. However, this
receiver cannot decode DTS-CD when set to “DEC.
31GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB070TH_HT-DDW670-U.fm] masterpage:Left
32GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB08REM_HT-DDW670-U.fm] masterpage:Right
2
ek SYSTEM STANDBY
Inserting batteries into the ej VIDEO 1 VIDEO 2 DVD SA-CD/CD 3
remote 4
eh
wk G ENTER g
Tip qg*
wj f
Under normal conditions, the batteries should last for
RETURN/EXIT DISPLAY
about 6 months. When the remote no longer operates TV CH – c STEP C TV CH +
qh
the receiver, replace all batteries with new ones. PRESET – REPLAY ADVANCE PRESET +
wh . < < > qj
Notes wg TUNING – TUNING + qk
• Do not leave the remote in an extremely hot or humid m H M
wf ql
place. TV
• Do not use a new battery with an old one. wd X x w;
• Do not expose the remote sensor to direct sunlight or ws wa*
lighting apparatuses. Doing so may cause a
malfunction.
• If you don’t use the remote for an extended period of
time, remove the batteries to avoid possible damage
from battery leakage and corrosion. * The MASTER VOL +, numeric button 5 and H
buttons have a tactile dot. Use the tactile dot as a
reference when operating the receiver and other
audio/video components.
continued
33GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB08REM_HT-DDW670-U.fm] masterpage:Left
The tables below show the settings of each Remote Operations Function
button. Button
Remote Operations Function ENTER wl Receiver/ Enters the selection.
Button VCR/
A.F.D. ef Receiver Selects the decoding DVD player/
mode for audio sound. Satellite tuner/
CD player/
ANGLE DVD player Selects viewing angle or
MD deck
qs changes the angles.
FM MODE Receiver Selects FM monaural
ANT 0 VCR/ Selects output signal
9 or stereo reception.
Satellite tuner from the antenna
terminal: TV signal or JUMP qs Satellite tuner Toggles between the
VCR program. previous and the
current channels.
AUDIO DVD player/ Changes the sound to
9 MAIN Receiver Selects the menu of
Satellite tuner Multiplex or Bilingual
or Multi channel TV MENU 5 the receiver.
sound. MASTER Receiver/TV Adjusts the master
AV VCR/ Displays menu. VOL +/– volume of the
MENU qd DVD player/ qg receiver.
Satellite tuner MEMORY Receiver Stores the radio
qa stations.
AV ?/1 VCR/ Turns the audio and
1 CD player/ video components on or MOVIE 6 Receiver Selects the pre-
DVD player/ off. programmed sound
Satellite tuner/ fields for movie.
MD deck MPX 9 VCR Select main or sub
CLEAR DVD player/ Clears a mistake when language.
ea Satellite tuner you press the incorrect MUSIC 7 Receiver Selects the pre-
numeric buttons or programmed sound
returns to continuous fields for music.
playback etc. MUTING qf Receiver Mutes the sound from
DISPLAY Receiver/ Selects information the receiver.
qh CD player/ displayed on the TV PRESET +/– Receiver Selects preset stations.
VCR/ screen. qjwh
DVD player/
TV/VCR/ Select preset channel.
Satellite tuner/
Satellite tuner
MD deck
RETURN/ DVD player Returns to the
D.SKIP CD player/ Skips discs (multi-disc
EXIT wj previous menu or
qa DVD player changer only).
exits the menu.
D.TUNING Receiver Enters direct tuning
Satellite tuner Exits the menu.
0 mode.
SA-CD/CD Receiver To listen to Super
DUAL Receiver Selects the language you
4 Audio CD or compact
MONO 8 want during digital
disc.
broadcast.
SHIFT qs Receiver Selects a memory
DVD 3 Receiver To watch DVD.
page for presetting
ENTER TV/VCR/ After selecting a radio stations or
qa Satellite tuner channel, disc or track tuning to preset
using the numeric stations.
buttons, press to enter
the value.
34GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB08REM_HT-DDW670-U.fm] masterpage:Right
continued
35GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB08REM_HT-DDW670-U.fm] masterpage:Left
36GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB09ADD_HT-DDW670-U.fm] masterpage:Right
Additional Information
Clean the cabinet, panel and controls with a soft cloth
outlet. To disconnect the AC power cord, grasp the
slightly moistened with a mild detergent solution. Do
plug itself; never pull the cord.
not use any type of abrasive pad, scouring powder or
• (Models of area code U, CA only) solvent such as alcohol or benzine.
One blade of the plug is wider than the other for the
purpose of safety and will fit into the wall outlet only
If you have any question or problem concerning your
one way. If you are unable to insert the plug fully into
receiver, please consult your nearest Sony dealer.
the outlet, contact your dealer.
• AC power cord must be changed only at the qualified
service shop.
On heat buildup
Although the receiver heats up during operation, this is
not a malfunction. If you continuously use this receiver
at a large volume, the cabinet temperature of the top,
side and bottom rises considerably. To avoid burning
yourself, do not touch the cabinet.
On placement
• Place the receiver in a location with adequate
ventilation to prevent heat buildup and prolong the
life of the receiver.
• Do not place the receiver near heat sources, or in a
place subject to direct sunlight, excessive dust or
mechanical shock.
• Do not place anything on top of the cabinet that
might block the ventilation holes and cause
malfunctions.
• Use caution when placing the receiver or speakers on
surfaces that have been specially treated (with wax,
oil, polish, etc.) as staining or discoloration of the
surface may result.
On operation
Before connecting other components, be sure to turn
off and unplug the receiver.
37GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB09ADD_HT-DDW670-U.fm] masterpage:Left
38GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB09ADD_HT-DDW670-U.fm] masterpage:Right
Error messages
To ground If there is a malfunction, the display shows a
Additional Information
message. You can check the condition of the
Radio stations cannot be tuned in. receiver by the message. Refer to the following
• Check that the antennas are connected securely. table to solve the problem.
Adjust the antennas and connect an external
DEC. EROR
antenna if necessary.
Appears when the signal which the receiver cannot
• The signal strength of the stations is too weak
(when tuning in with automatic tuning). Use direct decode (ex. DTS-CD) is input when “DEC. XXXX”
tuning. is set to “DEC. PCM”. Set to “DEC. AUTO”.
• Make sure you set the tuning interval correctly PROTECT
(when tuning in AM stations with direct tuning). Irregular current is output from the speakers. The
• No stations have been preset or the preset stations receiver will automatically turn off after a few
have been cleared (when tuning by scanning seconds. Check the speaker connection and turn on
preset stations). Preset the stations (page 20). the power again. If this problem persists, consult
• Press DISPLAY repeatedly so that the frequency your nearest Sony dealer.
appears in the display.
RDS does not work.*
• Make sure that you are tuned to an FM RDS
station.
• Select a stronger FM station.
The RDS information that you want does not
appear.*
• Contact the radio station and find out whether they
actually provide the service in question. If so, the
service may be temporarily out of order.
continued
39GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB09ADD_HT-DDW670-U.fm] masterpage:Left
40GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB09ADD_HT-DDW670-U.fm] masterpage:Right
Additional Information
Area code Power requirements 3) You can change the AM tuning scale to 9 kHz or
U, CA 120 V AC, 60 Hz 10 kHz. After tuning in any AM station, turn off the
receiver. While holding down PRESET TUNING +
CEL, CEK, SP 230 V AC, 50 Hz
or TUNING +, press ?/1. All preset stations will be
AU, E51 240 V AC, 50 Hz erased when you change the tuning scale. To reset
MX 127 V AC, 60 Hz the scale to 10 kHz (or 9 kHz), repeat the procedure.
Tone
Gain levels ±6 dB, 1 dB step
continued
41GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB09ADD_HT-DDW670-U.fm] masterpage:Left
42GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB09ADD_HT-DDW670-U.fm] masterpage:Right-3
(3 column)
GB01COV_HT-DDW670-U.book Page 43 Wednesday, July 13, 2005 1:45 PM
Main unit
Additional Information
MOVIE 0 (26, 27, 38)
DVD ql (18) MUSIC qa (27, 38) NUMBERS AND SYMBOLS
ENTER 7 (14, 32)
FM qj (18, 19, 32, 41) 2CH 8 (25, 27, 29)
FM MODE wg (19) ?/1 (power) 1 (14, 20, 29)
</> qf (15, 28, 30, 32)
+/– qg (15, 28, 30, 32)
1 2 3 4 5 6 7 8 9 q; qa
wh wgwf wd ws wa w; ql qk qj qh qg qf qd qs
43GB
model name1[HT-DDW670]
[2-342-216-14(1)]
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB01COV_HT-DDW670-UIX.fm] masterpage:Left
Index
A S
Adjusting Selecting
CUSTOMIZE parameters 30 component 18
LEVEL parameters 28 sound field 26–27
SET UP parameters 15 SET UP menu 15
speaker levels and balance 17 Sleep Timer 32
TONE parameters 30 Sound field
Automatic tuning 19 customizing 28
pre-programmed 26–27
resetting 29
C selecting 26–27
Changing Speakers
display 23 adjusting speaker levels and balance 17
Clearing receiver’s memory 14 connection 11
CUSTOMIZE menu 30 installing 13
placement 11
Supplied accessories 42
D
Digital Cinema Sound 26
Direct tuning 19 T
Dual Mono 31 Test tone 17
TONE menu 30
Tuning
I automatically 19
Indexing. See Naming
directly 19
Installing the speakers 13
to preset stations 20
L
Labeling. See Naming
LEVEL menu 28
N
Naming 32
P
Preset stations
how to 20
how to tune 21
R
RDS 21
model name1[HT-DDW760]
[2-342-216-14(1)]