Professional Documents
Culture Documents
,Ltd
USE:
This machine is suitable for slitting and rewinding such various roll materials as BOPP, PET,
CPP, CPE, PVC, laminated film, non-woven fabric, aluminum foil and paper, etc. And can cut
edge, separate and cut material according to different requirements during production.
Features:
Machine Configuration:
1. Unwinding part
a. Unwinding shaft: ¢74mm air shaft 1pc, (used for ¢76mm paper tube). for pneumatic
loader.
b. Unwinding material: position can be adjusted.
c. Feeding tension was controlled by Magnetic powder brake (10kgs).
d. Rectify edge deviation: synchronous motor with ball rail 1pc, photocell 1pc.
2. Rewinding part
a. Rewinding part adopts double rewinding shaft at one time.
b. With air shaft 2pcs, diameter 76mm.
c. Rewinding tension was controller by Magnetic powder clutch 2pcs (Powder: 10kgs).
d. Rewinding tension can be adjusted.
3. Slitting
a. Slitting knife: Straight knife (Surgical knife) 10pcs and Circular knife 8pcs. There’re two
ways of slitting.
b. Slitting width can be adjusted on your request.
c. Straight knife was fixed on knife shelf, and circular knife was fixed on driving shaft.
d. There’s wind tube to remove them when slitting waste material (width below 30mm).
e. Air blower 550w, 380v.
f. There’re 2pcs rubber roller for traction with pneumatic.
4. Aluminum roll
a. Aluminum alloy guide roller 6pcs.
b. Bearing (Haerbing city).
5. Operating Structure
a. Speed was controlled by a frequency motor
b. The machine operation: Unwinding, traction, rewinding.
Weight 1500kg
Tool Box 1 set (1-10# screwdriver, oil gun, Inner Hexagon Spanner 1 set, one pack of
straight knife. And one pc of round knife, machine operation instruction 1 pcs, the inverter
instruction 1 pcs )
Certificate:
Chinaplas: