Professional Documents
Culture Documents
AVM Catalogue 5.00 en PDF
AVM Catalogue 5.00 en PDF
com
Anti-Vibration Mounts
A complete range of solutions to structure-borne
noise and vibration
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 1
Shop: View our online shop for AVMs
www.iac-acoustics.com
RPM
4000
3600
3200
2800
2400
2000
1800
1600
98
%
Degree of isolation
1400
97
%
95
1200
Reduction
RPM = 60 x Disturbing Frequency, Hz
90
%
1000
85
%
900
80
98 % 34dB
%
70
800
%
50
Re
700 97 % 30dB
so
na
0
%
nc
e
–
600
ar
ea
95 % 26dB
to
be
av
500
oi
de
d
450
400 90 % 20dB
350
85 % 16dB
300 80 % 14dB
250 70 % 10dB
225
50 % 6dB
200
175
0%
150
125
0.5 0.75 1.0 1.5 2 3 4 5 6 7 8 12 16 24 32 48 64
Static deflection in mm
Web: www.iac-acoustics.com
2 Email: avm@iac-acoustics.com 2
Example 1 O/min.
4000
A fan is mounted on a steel frame with a total weight of 360kg. The fan runs at 3200
2800
2000
According to the diagram to the right this will require a static deflection of 1800
1600
98
3.5mm.
Degree of isolation
1400
97
%
95
1200
Reduction
A type AD vibration isolator would be suitable in this case. When the fan is
90
%
1000
85
%
900
80
placed on 4 vibration isolators, each supporting a load of 90kg will give a
98 % 34dB
%
70
800
%
50
%
deflection of 3.5mm. 700 97 % 30dB
0
%
600
95 % 26dB
500
Re
This graph show that 4 of the AD 5035 WHITE absorbers can be used here.
so
na
450
nc
e
–
ar
400 90 % 20dB
ea
to
be
350
kg
av
AD 5035
oi
85 % 16dB
de
160
d
300 80 % 14dB
250 70 % 10dB
225
120 200
50 % 6dB
175
0%
150
80
125
0.5 0.75
1.0 1.5 2 3 4 5 6 7
8 12 16 24 32 48 64
Static deflection in mm
40
0
0 1 2 3 4mm
O/min.
4000
Example 2
RPM = 60 x Disturbing Frequency
3600
3200
2800
2210kg running at 1200rpm. The task is to reduce the amount of force 2000
1800
transferred to 20% of the disturbing force. 1600
98
%
Degree of isolation
1400
97
%
95
The motor and machine are fixed to a base frame with a mass of 1680kg, 1200
Reduction
90
which gives a total mass of 4530kg. %
1000
85
%
900
80
98 % 34 dB
%
70
800
%
50
%
700 97 % 30 dB
The base frame has 4 supporting points and it can be calculated that the load
0
%
600
450
so
na
nc
e
400 90 % 20 dB
–
350
be
85 % 16 dB
av
of the disturbing force), at 1200rpm, (the design must follow the unit with the
oi
de
d
300 80 % 14 dB
lowest rpm, as explained above), requires a deflection of 3.7mm. As the load is 250 70 % 10 dB
225
unevenly distributed, various vibration isolators need to be used. The graphs 200
50 % 6 dB
below describe VIKAS SANDWICH mounts, and show that one WHITE 200, one 175
0%
RED 200, one BLACK 400 and one RED 500 can be used in this situation.
150
125
0.5 0.75
1.0 1,5 2 3 4 5 6 7
8 12 16 24 32 48 64
Static deflection in mm
800
1500 3000
600
1000 2000
400
500 1000
200
0 0
0
0 1 2 3 4 5mm 0 1 2 3 4 5mm 0 1 2 3 4 5mm
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 3
Shop: View our online shop for AVMs
RB
22
2500
4
07
BR 6 0
0
0
22
BR
www.iac-acoustics.com
0
B
18
B
22
06
2000
RB
70
0
B
0
15
BR
40
1500
60
B
0
22
BR
50
18
05
1
BR 0
B
B
BR
B
BR
50
18
06 BR 1000
50
RB 0 BR
B
1
22 B
40
15
0 7 125
B
04
70
Contents
BR
0 800
0
0 70
15
11
700
50 R B
B
BR
0 B
BR BR 600
60
B B
15 12
11
500
0
06 BR 56
11
0 0
RB
BR BR B
95
B
B BR
B
B
BR
18 15 BRB 11 70 400
05 BR
40
04
B 5 70 0
0 B 07 B
BR B 6 0 7
0 12 0 95
0
55
11
BR 60
60
60
B 0 300
BR B
B
15
& BR
80
5 0 65
BR
BR
04 B 250
B
0 11
B BR
06 BR
BR 0 B
0
70
BR 0 &
BR 8 0
8
B 200
70
11 B 70
0
05 70
70
55
B
0 70
BR
BR
6
RB
BR &
RB
BR B 7 BR 150
B
B 06 B B6
Technical information
B
8-12
95 0 80 57
40
&
40 & B 60
0
BR 0
7
50
B
65
RB
60
11
50 40 & 60 0
0
65
B
04 BR
70 RB
6
40 B 7
100
BR
60
50 60
0 B
50 B
80
80 R
BR BR BR R B
0
B B
50
80
B
B
BR
0
B
RB B 7
B 70
BR
BR
BR
B
50
0
B
0
6
BR 70
5
70 60
00
50
BR B 6 50 BR
B 06 & B
BR 80 0 BR 60 50
0
B6
B
40
4
80 B 70
70 55
60
70 4 0 BR 0 40
RB
& B6
BR 0
B
60 B 6 50 BR
40
54 B
0 50 30
50
Cylindrical rubber mounts: AD, RAD 14-15
50 60
B
BR
BR
B 25
40 50
50
BR 20
BR B
30 60
B 40
50
25 40 15
18 20
12 14 15
7 8 9 10
20 5 6 (mm)
2
3 4 Deflection
15 1
18 20
14 16
12
11 uency Hz
Cylindrical rubber mounts: SDA, SDB, SDC, SDD, SDE 16-17
10 eq
Natural Fr
8 9
6 7
5
250
200
150
100
50
0
0 2 4 6 8
D ef el ct io n in mm
10 12 14 Rubber turret mounts: FAV 26-27
IACS D4343(white) IACS D4343(R ed) IACS D4343(B lack)
Web: www.iac-acoustics.com
4 Email: avm@iac-acoustics.com 4
Contents
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 5
Shop: View our online shop for AVMs
www.iac-acoustics.com
Contents
Hydromounts 53-54
Flexible Bushings: VP 59
Flexible Bushings: GE 60
Open Spring Mounts: FDA, FDA1, FDA2, FDA3, FDA4, FDA5, FDA6, FDA9 68-73
Web: www.iac-acoustics.com
6 Email: avm@iac-acoustics.com 6
Contents
M M
G
G
K
K
A
N N
t t
D D
H H
E E
Contacts 90
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 7
Shop: View our online shop for AVMs
www.iac-acoustics.com
Application options
Flexible Bushing
Sandwich Mount
Machine Mount
Rubber Buffer
Captive Mount
Shock Mounts
Turret Mount
Rubber Pads
Open Spring
Instrument
Area of Use Various Mounts
Mount
Mounts
Pipework Fittings X X X X
Buildings X X X
Electrical Motors X X X X X
Combustion Engines X X X X
Generators X X X X X
Household Equipment X X X
Office Equipment X X X X X
Compressors X X X X X X X
Grinding Mills X X X X X
Chillers X X X X X X X X X X
Flexible Joints X X
Mobile Equipment X X X X X X
Guillotines X X X X
Presses X X X X X
Pumps X X X X X X X X X
Piping X X
Punching Machines X X X X X
Printing Machines X X X
Saw Mills X X X
Rolling Mills X X
Ceilings X X
Fans X X X X X X X X X X
Machine Tools X X X X X X X X
Web: www.iac-acoustics.com
8 Email: avm@iac-acoustics.com 8
Rubber Properties Natural Rubber Neoprene
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 9
Shop: View our online shop for AVMs
www.iac-acoustics.com
Web: www.iac-acoustics.com
10 Email: avm@iac-acoustics.com 10
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 11
Shop: View our online shop for AVMs
www.iac-acoustics.com
Natural Frequencies 1 2 3
Fe (Hz) 10.328 13.070 13.914
om(rad/s) 64.894 82.123 87.424
X_M 0.000 -0.000 -0.000
Y_M 0.000 0.000 0.000
Z_M -0.023 1.000 1.000
Phix_M 1.000 0.003 0.002
Example 3: Model of large concrete foundation with a 2-stroke diesel Phiy_M -0.000 0.324 -0.108
engine. Phiz_M -0.037 -0.000 -0.000
The vibration isolation system consists of 144 rubber pads type In recent years, IAC Acoustics has taken on more projects requiring
VIKAFOAM25810 (see separate VIKAFOAM catalogue for further engineered vibration isolation solutions for large foundations.
details) placed under the foundation.
Increased focus on the control of sound in buildings that are placed
The isolation of the concrete foundation was achieved by placing near to transport systems has meant an increasing requirement for
rubber pads over the entire floor area of the excavation for the vibration isolation of buildings against the influences of external and
foundation. Then the concrete was poured into the hole and the internal noise. For this we often use our PUR products VIKAFOAM (see
foundation was cast directly on the rubber pads. separate VIKAFOAM catalogue for further details) that are made in
standard sizes of 500 x 2000 mm.
Scope of delivery:
• Dynamic analysis
• Calculation of Eigen frequencies and visualisation of mode
shapes
• Transmissibility curves
• Delivery of rubber pads according to calculations
Shock isolation of Sea beacon (seen from the side) Vibration isolation of valve test stand
Web: www.iac-acoustics.com
12 Email: avm@iac-acoustics.com 12
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 13
Shop: View our online shop for AVMs
www.iac-acoustics.com
Product Description
Application
This vibration mount is used to dampen noise and vibrations from øD
stationary machinery such as ventilators, pumps, electric motors, G
H
Accessories
Galvanised steel base plates are avialable for fastening on to floors.
T
When ordering, please use designations RADXXXX for stainless
a
version.
L
Web: www.iac-acoustics.com
14 Email: avm@iac-acoustics.com 14
6 6 30 30 60 60
4 4 20 20 40 40
2 2 10 10 20 20
0 0 0 0 0 0
0 0 1 1 2 2 3 0 3 0 1 1 2 2 3 0 3 0 1 1
Deflection (mm)
Deflection (mm) Deflection (mm)
Deflection (mm)
Load (kg) Load (kg) AD 1215 ADLoad 1215(kg) Load (kg) AD 2015 ADLoad 2015(kg) Load (kg)
D 2015ADLoad
2015(kg)
8 Load (kg)
8 AD 3025AD 3025 Load
40 (kg) Load40 (kg) AD 4030AD 4030
80 80
Load80(kg) Load
80 (kg) AD 5035 AD Load5035
(kg)
1000 Load
1000 (kg) AD 7535 AD 7535
Load (kg) Load (kg)
160 160 400 400 800 800
6 6 30
800 30
800 60 60
60 60
120 120 300 300 600 600
600 600
4 4 20 20 40 40
40 40
80 80 200 200 400 400
400 400
2 2 10 10 20 20
20 20
40 40 100
200 100
200 200 200
0 0 0 0 0 0
0 0 0 0 1 1 2 2 3 00 3 0 0 1 1 2 2 0 3
3 0 1 1
2 3 0 03 0 1 1 2 2 3 0 0
3 0 0 1 1 2 2 3 3 0 44 0
Deflection (mm)
Deflection (mm)
0 0 1 1 2
Deflection
2
(mm)
Deflection
3
(mm)
0 3 1 0 21
0 01 12 23 34 4
on (mm)
Deflection (mm) Deflection (mm)
Deflection (mm) Deflection (mm)
Deflection (mm)
Deflection (mm)
Deflection (mm) Deflection (mm)
Deflection (mm)
D 2015 Load (kg) AD 3025 Load (kg) AD 4030
Load
80 (kg) Load (kg) AD 5035 AD 5035
Load
1000(kg) Load (kg) AD 7535 ADLoad 7535(kg) Load (kg)
D 7535ADLoad
7535
160(kg) Load
160(kg) AD 10050
AD 10050
400 400 800 800
800
Load (kg) 800
Load (kg) ADF 4020ADF 4020
Load (kg) Load (kg) ADM LoadADM
(kg) Load (kg)
100 100 800
500 500 1500 1500
60
30
30
100
600 600
80 80 600
400 400 1200 1200
40
80 80 200 200 400 400
400
60 400 60 400
300 300 900 900
35 35
75 75
20
4040 40
40 100
200
200 100
200 200
600 200
600
200 200
5035 5035
200 20 100 0 100 300 300
3 00 0 1 2 3 0 0 0 1 2 3 4 0 0
0 0 0 0 1 1 2 2 3 3 4 0 4 0 1 1 2 2 3 0 3 10 21
on
2
(mm)
3 03 1
0 12 23
Deflection
34
(mm)45 5
Deflection (mm)
Deflection (mm)
Deflection (mm) Deflection (mm)
Deflection (mm)
0 0 0 0 0 0
on (mm)
Deflection (mm)
0 1 0 21 32 Deflection
43 (mm)
Deflection
5 4 (mm)0 5 2 0 42 64 86 10 8 0 10 2 0 42
30
20 20 80 80 400 400
100
100
600
80 80 55 SH 55 SH 400 400 1200 1200
1200 1200
15 15 60 60 300 300
40060 60 300 300 900 900
900 900
35 35
35 75 75
Errors and Omissions Excepted (E&OE).
40 SH 40 SH
40
10 40
10 200
40 200
40 600
200 600
200
200
600 600
5035 5035
035 20 20 100 100 300 300
300 5 300 5 20 20 100 100
0
3 0 1 2 3 4 5
0 0 0 0 0 0
on (mm) Deflection (mm) 54 0 10 20 42
0 0 0 10 21 32 43 0 5 20 42 64 86 108
10
8 0 2
0 24 46 68 10
8 10
0 10 0 Deflection (mm)
Deflection 0
(mm) 0
Deflection (mm)
Deflection (mm) 0 0
0 01 12 23 3 4 0 4 4 0 84 128 1612 2016 0 20 0
10 1020
on (mm)
Deflection (mm) Deflection (mm)
Deflection (mm)
ADM Load (kg) ADP 14040
Deflection (mm)
Deflection (mm) Deflection (mm)
Deflection (mm)
Load (kg) Load (kg)
1500 GB 2517 GBLoad 2517 (kg) Load (kg) GB 3036 GBLoad 3036(kg) Load (kg)
B 3036GBLoad 3036
20(kg) Load20
(kg) GB 5068GBLoad 5068
Load
80 (kg) Load80 (kg) GB 5045GB 5045
Load
400 (kg) Load (kg)
400 GB 7590 GB 400 7590
(kg) Load
400
(kg) GB 90110GB 90110
400 400
Product Description
Application
The SD range of mounts are mainly used to dampen noise and
vibrations from stationary machinery such as ventilators, pumps,
electric motors, converters and compressors.
Other sizes available from stock, please call for more information
SDD SDE
Dimensions Max. Load Static Deflection* Thread Thread
Diameter (mm) Height (mm) (kg) (mm) (Male) (Female)
10 10 5 1.4 M4x10mm M4
20 15 15 1.9 M8x18mm M6
20 20 15 3.2 M6x18mm M6
20 25 15 4.4 M6x18mm M6
25 10 25 1.5 M6x18mm M6
25 15 25 2.1 M6x18mm M6
25 20 25 3.1 M6x18mm M6
25 25 25 4.5 M6x18mm M6
25 30 25 5.8 M6x18mm M6
30 15 35 1.4 M8x20mm M8
30 20 35 2.8 M8x20mm M8
30 25 35 4.0 M8x20mm M8
30 30 35 5.4 M8x20mm M8
40 30 60 4.6 M8x23mm M8
40 40 60 7.2 M8x23mm M8
50 20 100 2.5 M10x28mm M10
50 30 100 4.4 M10x28mm M10
50 40 100 7.9 M10x28mm M10
50 45 100 8.1 M10x28mm M10
50 50 100 9.0 M10x28mm M10
70 75 190 7.2 M10x28mm M10
Errors and Omissions Excepted (E&OE).
Web: www.iac-acoustics.com
16 Email: avm@iac-acoustics.com 16
Above listed static deflection is based on a hardness of 45 Sh. All are available in other hardness’s
* The static deflection can vary between the types A, B, C, D and E.
** Not standard – available on request
Errors and Omissions Excepted (E&OE).
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 17
Shop: View our online shop for AVMs
www.iac-acoustics.com
Product Description
When ordering, please use designations RADF, RADM and RADP for
stainless version.
Applications
Machine feet can be used for the absorption of noise and vibrations
from any installed machinery. The shape of the feet give the machine
feet a high static deflection and therefore excellent vibration
insulation.
GM
Accessories
Adjustable spindles and feet plates are available with types ADM and GM
ADP. These are used to link several machine feet if required.
Web: www.iac-acoustics.com
18 Email: avm@iac-acoustics.com 18
www.iac-acoustics.com
40 40
400
100 100 200 200
20
200
30
30
100
100
80 80 400 400 1200 1200
600
5035 5035
20
200 20 100 100 300 300
0 0 0 0 0 0
0 1 0 21 32 43 5 4 0 5 2 0 42 64 86 10 8 0 10 2 0 42
0
3 0 1 2 3 4
Deflection 5
Deflection
(mm) (mm) Deflection (mm)
Deflection (mm)
on (mm) Deflection (mm)
40 SH 40 SH
90010 10 40 40 200 200
600
5 5 20 20 100 100
Length Width Thickness Central
300
(mm) (mm) (mm) Thread
0 0 0 0 FP 10030/2 195 80 10 0 M16 0
0 01 12 23 3 4 0 4 4 0 84 128 1612 2016 0 20 0
10 1020
0
0 2 4 6 Deflection
8 Deflection
(mm)
10 (mm) Deflection (mm)
Deflection (mm)
10
300 300
300 300 600 600
200
200 200 400
200 400
0 0 0 0
0 5 0 10 5 15 10 20 15 25 20 30 25 0 30 010 10 20 2030 3040 40
0 Deflection (mm)
Deflection (mm) 0 Deflection (mm)
Deflection (mm)
20 0 10 20 30 40 0 2 4 6 8
on (mm) Deflection (mm) Deflection (mm)
Load (kg) Load (kg) FA 5035 FALoad
5035(kg) Load (kg) FA 6535 FA 6535
90110 20 20 120 120
White White
15 15
80 80
Errors and Omissions Excepted (E&OE).
10 10
White hollow White hollow White White
40 40
5 5
White hollow White hollow
0 0 0 0
0 1 0 21 32 43 5 4 0 5 1 0 2 1 3 2 4 3 5 4 6 5 6
40 Deflection (mm)
Deflection (mm) Deflection (mm)
Deflection (mm)
on (mm)
Web: www.iac-acoustics.com
200 200 Email: avm@iac-acoustics.com 19
Shop: View our online shop for AVMs
150 150
www.iac-acoustics.com
Rubber Buffers GB
Product Description
Applications
Used to dampen all types of drop and impact shocks from cranes, rail
wagons and stopping mechanisms. The GB range of buffers absorb
the kinetic energy, minimising shock from the impact.
These rubber buffers can also be used in machinery as a limiting
element against any extreme oscillations for instance with the shifting
of resonance frequency or as part of a flexible guide rail.
Fitting
H
H
øB G G
øB øB øB
GB3036 80 30 36 - M8x20
Web: www.iac-acoustics.com
20 Email: avm@iac-acoustics.com 20
Deflection (mm)
Deflection (mm) Deflection (mm)
Deflection (mm)
30
20 20
30
100
100
55 SH 55 SH
80 80 400 400 1200 1200
1200 1200
15 15 60 60 300 300
60 60 300 300 900 900
900 900
35 35
35 40 SH 40 SH 75 75
10 10 40 40 200
600 200
40 40 200 200 600
600 600
5035 5035
035 20 100 100 300 300
300 5 205 20 20 100 100
300
0
0
0 0 0
0 21 0 21 32 43 5 4
0
0 5
0
2 0 42 64 86 10 8 0 10 20 0 42
10 0 00 24 46 68 10
8 0 10 0 0 0
8 0 10
0 01 12 2 Deflection
3 (mm)
Deflection
3 4 (mm)
0 4 4 0 84 128 Deflection
1612 (mm)
Deflection
2016 (mm)
0 20 0
10 1020
on (mm)
Deflection (mm) Deflection (mm)
Deflection (mm)
Deflection (mm)
Deflection (mm) Deflection (mm)
Deflection (mm)
Load (kg)
B 3036GBLoad Load (kg) GB 5068
GB 2517 GB 2517
Load (kg) Load (kg) GB
GB 3036 GB
5045GB 3036
Load (kg) Load (kg)
3036
Load
(kg)
20 (kg)
Load (kg)
Load
20 (kg) GB 7590GB
GB5068
Load
7590
Load
80
(kg)
(kg) Load
Load (kg)
80 (kg) GB 90110 GB 5045
90110
400 400
400 400 400 400
500 500 55 SH 55 SH1000 1000
15 15 60 60 300 300
400
300 300400 800
300 800
300
40 SH 40 SH
300 300 600 600
10 10 40 40 200 200
200 200 200 200
0 0 0 0 0 0
0 0 0 00 04 0 84 128 1612 2016 0 20 10 1020
01 12 23 3 4 4 0
20
16 0 0 20 00 10 10 20 20 30 30 40 0 40 0 00 2 2 4 4 6 6 8 8
0 5 0 10 5 15 10 20 15Deflection
25 20 (mm)
30 25 0 30
Deflection (mm) 010 10 20 20Deflection
30 (mm)
3040 40
Deflection (mm)
on (mm)
Deflection (mm) Deflection (mm)
Deflection (mm) Deflection (mm)
Deflection
Deflection (mm)
Deflection (mm) Deflection (mm)
Deflection (mm) (mm)
15 15
300 300 600 600
80 80
10
200 10
200 400 400
White hollow White hollow White White
40 40
100 100 200 200
5 5
White hollow White hollow
0 0 0 0
0 5 0 10 5 15 10 20 15 25 20 30 25 0 30 010 10 20 2030 3040 40
30 40 0 40 0 0 0
0 1 0 21 32 Deflection
43 (mm)
Deflection
5 4 (mm)
0 5 1 0 2 1 3 2 4 3Deflection
5 4 (mm)
Deflection
6 5 (mm)6
on (mm)
Deflection (mm)
Deflection (mm)
Deflection (mm) Deflection (mm)
Deflection (mm)
250 250
White White
Direction of
15 15 Travel
200 200
80 80
Direction of
Travel
10
150 10
150
Errors and Omissions Excepted (E&OE).
Web: www.iac-acoustics.com
21
200 200
800 800
600 600 Email: avm@iac-acoustics.com
1500 1500
150 150
600 600
Shop: View our online shop for AVMs
www.iac-acoustics.com
Material
• Polyetherurethane
• Hardness 65 - 75 Sh.
• Temperature range: -40°C to +80°C
• Short interval temperature up to +110°C
• Is resistant against oil and grease
Applications
ØD
Ød
h H
100 PB100100 100 93 100 40 M12 circa 79 75% 39 60 76 0.51 0.69 0.94
125 PB125125 125 117 124 40 M12 circa 94 75% 58 82 109 0.98 1.40 1.70
160 PB160160 160 152 158 40 M12 circa 118 75% 85 120 150 1.17 2.56 2.97
200 PB200200 200 180 202 40 M12 circa 158 75% 149 220 270 4.40 6.40 7.70
Deflection (mm)
Deflection (%)
Deflection (%)
50 50
60 60
40 40
45 45
30 30
Errors and Omissions Excepted (E&OE).
20 30 20 30
10 15 10 15
0 0 0 0
0 5 10 15 20 25 30 35 40 0 0.1 0.2 0.3 0.4 0.5
Load (kN) Work (kNm)
Deflection (mm)
Deflection (%)
Deflection (%)
70 70
60 60 60 Web: www.iac-acoustics.com
60
22 50 50
Email: avm@iac-acoustics.com 22
10 15 10 15
Polyetherurethane (PUR)
0
Buffers 0 0 0
PB
0 5 10 15 20 25 30 35 40 0 0.1 0.2 0.3 0.4 0.5
Load (kN) Work (kNm)
Deflection (mm)
Deflection (mm)
Deflection (%)
Deflection (%)
70 70
Key
60 60 60 60
static 50 50
45 45
40 40
1m/s
30 30 30 30
2m/s 20 20
15 15
10 10
0 0 0 0
0 10 20 30 40 50 60 70 80 0 0.2 0.4 0.6 0.8 1.0
Load (kN) Work (kNm)
Deflection (mm)
Deflection (%)
Deflection (%)
80 80
60 60
70 70
60 60
45 45
50 50
40 30 40 30
30 30
20 15 20 15
10 10
0 0 0 0
0 20 40 60 80 100 120 0 0.4 0.8 1.2 1.6 2.0
Load (kN) Work (kNm)
Deflection (mm)
Deflection (%)
Deflection (%)
100 100
60 60
80 80
45 45
60 60
30 30
40 40
20 15 20 15
0 0 0 0
0 20 40 60 80 100 120 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Load (kN) Work (kNm)
Deflection (mm)
Deflection (%)
Deflection (%)
140 140
120 60 120 60
100 100
45 45
Errors and Omissions Excepted (E&OE).
80 80
60 30 60 30
40 40
15 15
20 20
0 0 0 0
0 50 100 150 200 250 300 350 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0
Load (kN) Work (kNm)
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 23
Shop: View our online shop for AVMs
0 0 0 0 0 0
0 10 21 32 43 0 4 0 1 1 2 2 3 0 3 1 0
www.iac-acoustics.com Deflection (mm)Deflection (mm) Deflection (mm)Deflection (mm)
Rubber
Load (kg)
Turret
Load (kg)
Mounts ADF 4020 ADF
Load 4020
(kg) Load (kg) ADM ADM
Load (kg)
FALoad (kg)
100 100 500 500 1500 1500
30
30
100
100
80 80 400 400 1200 1200
Product Description
60 60 300 300 900 900
Rubber cones vulcanised onto galvanised steel discs. This vibration 3 5 3 5
75 75
mount is manufactured in natural rubber.
40 40 200 200 600 600
The white mounts are also available as hollow versions with lower 5035 5035
20 20 100 100 300 300
maximum loadings than the standard solid version.
Applications
0
0 1
0
0 2 1 3 2 4 3 5 4
0
0 5 2
0
0 4 2 6 4 8 6 10 8
0
0 10 2
0
0
5 5 20 20 100 100
B
C
G
H
0 0 0 0 0 0
0 10 21 32 43 0 4 4 0 8 4 12 8 16 12 20 16 0 20 10 0
D
Deflection (mm)Deflection (mm) Deflection (mm)
C
Deflection (mm)
B
Load (kg) Load (kg) GB 7590 GB 7590
Load (kg) Load (kg) GB 90110 GB 90110
500 500 1000 1000
300 White
300 hollow 45 12 4.3 600 600
FA5035 20 35 M8 50 39 5
White 45 20 4.6
200 200 hollow
White 45 30 4.5 400 400
White 45 60 5.1
FA6535
100 100 200 32 200 35 M10 65 48 7.5
Red 55 90 5.6
Black 65 120 5.9
0 0 0 0
0 5 0 10 5 15 10 20 15 25 20 30 25 0 30 100 20
10 30
20 40
30 40
Deflection (mm)Deflection (mm) Deflection (mm)Deflection (mm)
White White
15 15
80 80
10 10
White White
Errors and Omissions Excepted (E&OE).
40 40
5 5
White hollow White hollow
0 0 0 0
0 1 0 2 1 3 2 4 3 5 4 0 5 1 0 2 1 3 2 4 3 5 4 6 5 6
Web: www.iac-acoustics.com
24 200 200
Email: avm@iac-acoustics.com 24
200 400
Product
0
0 description
5 10 15 20 25 30
0
0 10 20 30 40
Deflection (mm) Deflection (mm)
IAC SD4343 mountings are moulded from high grade synthetic rubber,
in 3 different shore hardness’s. Threaded inserts are embedded into
Load (kg) FA 5035 Load (kg) FA 6535
the20top and steel re-inforcing plates at the bottom of the mounting.120
White
In case of replacement, the unique colour code allows you to
15
determine the rubber hardness of the element at anytime, despite
80
many years of use.
10
Application White hollow White
40
The 5IAC SD4343 isolators can be used in a wide range of applications
White hollow
including: air handling units, fans, pumps, compressors, chillers,
floating floors and isolation of studios and chambers
0 0
0 1 2 3 4 5 0 1 2 3 4 5 6
200
M M
B
150
H
D D
W
W
100
T
L2 L2
50 L1 L1
0
0 2 4 6 8 10 12 14
Deflection (mm)
Load (kg) SANDWICH 100 Load (kg) SANDWICH 200 Load (kg)
800 1000 2000
800
600 Hardness Max. Load Deflection Dimensions (mm) 1500
Type Colour
(Sh.) (kg) (mm) L1 W H L2 T D B M
600
IAC SD4343H White 40 80 10 110 65 54 84 7 11 5 M12
400 1000
IAC SD4343R Red 50 115 10 110 65 54 84 7 11 5 M12
400
IAC SD4343S Black 60 165 10 110 65 54 84 7 11 5 M12
200 500
200
0 0 0
0 1 2 3 4 5 0 1 2 3 4 5 0 1 2
8000
12000
6000
8000
4000
4000
2000
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 25
2 Shop: View our online shop for AVMs
0 0
0 1 2 3 4 5 0 1 3 4 5
www.iac-acoustics.com
Product Description
Stainless steel metals and oil resistant / high temperature rubbers are
available on request.
Applications
D
Also available in stainless steel
Ø
D G
D
IØ
Ø
D G
IØ
E
D
D
FAV0007 ØA
Ø
FAV0025 G FAV0400 ØC E
FAV0050 FAV0600
IØ
H
ØG
FAV0100 FAV1500
B
ØA
F
E
FAV0200 ØC
H
ØG
D
B
F
E
ØA
ØC
H
ØG
B
F
40 Sh 60 Sh 75 Sh
ØA B ØC D E F ØG H ØI
Type MAX load Deflection MAX load Deflection MAX load Deflection
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
(kg) (mm) (kg) (mm) (kg) (mm)
FAV0007 18 20 M6 50 64 2 7.0 7 43 3.5 3.0 9 3.0 13 2,5
FAV0025 33 25 M8 66 85 2 8.0 11 56 25 3.7 40 4.0 60 3,5
FAV0050 45 35 M10 92 114 2 10.0 14 76 40 4.0 80 4.0 100 4,0
FAV0100 53 40 M10 110 136 2 11.5 15 96 70 7.0 130 6.7 180 6,0
FAV0200 58 45 M10 124 151 3 11.5 13 101 150 8.0 220 7.0 320 8,0
FAV0400 70 63 M12 120 150 3 14.5 18 - 280 14.0 500 13.0 800 10,0
FAV0600 100 85 M16 160 200 4 14.5 25 - 380 15.0 750 14.0 1100 12,0
FAV1500 186 160 M24 250 310 6 18.0 43 - 1400 45.0 2500 40.0 3400 35,0
Errors and Omissions Excepted (E&OE).
Web: www.iac-acoustics.com
26 Email: avm@iac-acoustics.com 26
Determine the number of isolators and the load per isolator prior to
selecting the correct mount. Then select the mounts that provide the
greatest deflection without exceeding the maximum allowable load on the
mount, by referring to the static deflection curves listed below.
When ordering, specify hardness. For example, FAV0400-60 for Max. load
500kg or FAV0050-40 for Max. load 40kg.
75Sh
12 60
75Sh
60Sh
60Sh
8 40
40Sh
4 20
40Sh
0 0
0 1.5 3 4.5 0 1.5 3 4.5
Deflection (mm) Deflection (mm)
60 100 200
30 50 100
0 0 0
0 1.5 3 4.5 0 3 6 9 0 3 6 9
Deflection (mm) Deflection (mm) Deflection (mm)
60Sh
500 600 1800
40Sh
40Sh 40Sh
250 300 900
0 0 0
0 5 10 15 0 6 12 18 0 20 40 60
Deflection (mm) Deflection (mm) Deflection (mm)
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 27
Shop: View our online shop for AVMs
www.iac-acoustics.com
Product Description
DRD vibration / shock absorbers offer high elasticity in both radial and
axial directions. The horizontal elasticity of the DRD is very similar
to its vertical elasticity, allowing very fine isolation of equipment with
rotational vibrations and low speeds.
Technical Characteristics
Applications
DRD mounts are ideal for indoor stationary equipment and can be
used for a variety of machines running at low speed such as:
D
• Compressors
• Generators
• Air-conditioners D G
D
• Fans
• Shakers
D G
D E
D
DRD45 ØA
DRD65
G
DRD130 ØC E
DRD85 DRD170
D
DRD90 DRD250
ØG
ØA
B
F
E ØC
E
ØG
D
B
F
E
ØA
ØC
ØG
B
F
DRD 250 187 160 M24 250 310 6 18 1400 2500 3150 10400
Web: www.iac-acoustics.com
28 Email: avm@iac-acoustics.com 28
4000 4000
Load (kg)
Load (Kg)
5
3000 07
DR
3000
25
D
D
25
DR
07
0
06
5
DR
2000 2000 25
D
D
25
DR
06
0
1500 1500
5
04
DR
25
D
25
D
DR
1000
DR
1000
04
D
5
5
17
07
07
800 800
17
DR
5
D
700 700 D 0
DR 06
17
17
06
600 600
DR
0
5 D
DR
D
500 500 07
13
13
07
0
DR
06
DR
D
5
400 400
DR
D
13
D
13
17
D 5
06
04
04
DR
0
17
5
300 300
D
75 75 DR
DR
250 250
90
DR
85 5
D
D 04
90
D
D 0
DR 13
13
R
75
200 200 D 90 6
DR
04
D
DR
D
5
D
DR
90
DR
D
60
150 150
85
75
45
90
DR
DR 5
D 0
D
DR
100 100 R
D 56
90
D
85
8
4
65
D
60
80
60
DR
80
70 70
60
DR
60
60
65 45
D
D 60 85
85
50 50 DR 45
45
D D
DR DR
40 40
45
DR
DR
65
D
30 D
65
DR
45
30
45
60
25 25
20 20
45
DR
45
D
15 15
45
D
DR
45
10 10
3 5 10 15 20 25 1 2 3 4 5 6 8 10 15 20 30 40 50
Natural Frequency Hz Deflection (mm)
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 29
Shop: View our online shop for AVMs
www.iac-acoustics.com
Product Description
DSD vibration mount has good elasticity in both radial and axial
direction. The DSD mounts horizontal elasticity is very similar to
its vertical elasticity, allowing very fine isolation of equipment with
rotational vibrations and speeds over 1200 rpm.
Technical Characteristics
Applications
ØA
C
DSD vibration mount is ideal for indoor stationary equipment. Can be ØH
used for a wide range of machinery and production equipment with
medium to high speed. B
They are therefore very suitable for fans, pumps, electric motors, E
F
machinery, etc. G
ØA
C
ØH
Diagrams show a top mounting plate in addition to the isolator. These
B
are availabe in the correct sizes to complement the assembly and help
protect the isolator from oil and other contaminents.
E Assembly
F
G
Web: www.iac-acoustics.com
30 Email: avm@iac-acoustics.com 30
1500 1500
Load (Kg)
Load (Kg)
DS 75
D 00
1000 20
07 1000 SD2
DS 5 D
800 D 800 60
20
00
D2
700 06 700
0
600 600 DS
DS
500 D 500 45
20 00
D2
04
400 5 400 S
DS D 75
D 50
300
15
07 300 SD1
5 D 75
00
D1
250 DS 250
DS
D
15 D 8
DS DS 60
200 06 07 D 200 5 50
0 5
10
07 80 7 SD 1
5 D D
150 150 60 DS
DS DS
00 45
D
15
D
10 SD1 D1
50
04 DS 06
0
D DS
5 D
100 80 100
DS 0
6
45 0 60
80 D 80 00 D8 5
10 D1 DS 04
D8
DS
70 D
04
5
70 DS S
60 80 60 D
45
50 50
5
DS 07
40 D 40 D6
60
75 DS
30 30
DS 25 0
25 D 06
D6
60
20
60
20 DS
DS 5
04
15 D 15
D6
60
40 S
D
DS
10 D 10
0 60
D4
40
60
DS
5 5
DS 5
D 04
40
45 SD4
3 3 D
4 5 6 8 10 12 14 16 18 20 22 1 1.5 2 3 4 5 6 7
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 31
Shop: View our online shop for AVMs
www.iac-acoustics.com
Product Description
The Sandwich mount is made of 3 steel plates that are zinc plated and
vulcanised to layers of natural rubber. The vibration mount is made
in 3 different hardnesses where the colour of the rubber indicates its
hardness.
Application
The Sandwich vibration mount is used for reducing noise and vibration
from large stationary machinery such as fans, pumps and diesel
engines.
ød
5
ød
a
H
B L
f f
* Stiffness scale is the relation between the dynamic and static stiffness.
Web: www.iac-acoustics.com
32 Email: avm@iac-acoustics.com 32
50 15 50
15
White White
80 80
Deflection,
0 0
Static Load VIKAS 100-700
0
10 2 10 0 4 2 6 4 8 6 10 8 12 10 14 12 14
low White hollow White hollowWhite hollow White White
Deflection (mm)
Deflection (mm)
40 40
Load (kg)
5 Load
5 (kg) SANDWICH 100 Load (kg)
SANDWICH 100 Load (kg) SANDWICH 200 Load (kg)
SANDWICH 200 Load (kg)
4 6 5 6 1000 White hollowWhite hollow 2000
800 800 1000 2000
tion (mm)
Deflection (mm)
0 0 800 0 8000
0 05 10 21 32 43 54 6 51500 6
600 600 10 12 23 34 45 1500
Deflection (mm)
Deflection (mm) Deflection (mm)
Deflection (mm)
600 600
1000
400 400
Load (kg) Load (kg) IAC SD 4343
IAC SD 4343 1000
0
150 1500 0 0 0 0
0 1 0 21 32 43 5 4 0 1 0 21 32 43 5 4 0 5 1 0
5
Deflection (mm)
Deflection (mm) Deflection (mm)
Deflection (mm)
100 100
50
Load (kg) 50
Load (kg) SANDWICH 600 Load 600
SANDWICH (kg) Load (kg) SANDWICH 700
SANDWICH 700
10000 10000 16000 16000
SANDWICH
CH 200 Load200
0
(kg)
0
0
Load2(kg)
0 4 2 6 4 SANDWICH
8 6 10 8 SANDWICH
12 400
10 400(kg)
14 12Load 14 Load (kg) SANDWICH
SANDWICH
500 500
8000
2000 8000
2000 4000 4000
Deflection (mm) 12000(mm)
Deflection 12000
Load
6000 (kg) Load
6000 (kg) SANDWICH
SANDWICH
100 Load100
(kg) Load (kg) SANDWICH
SANDWICH
200 Load200
(kg) Load (kg)
1500800 1500
800 1000
3000 1000
3000 2000 2000
8000 8000
4000 4000
800 800
1000600 1000
600 2000 2000 1500 1500
4000 4000
2000 2000
600 600
500400 500
400 1000 1000 1000 1000
0 0 0
0 0 1 0 21 32 43 5 4
0 1 0 21 32 43 5 4 5 5
400 400
Deflection (mm)
Deflection (mm) Deflection (mm)
Deflection (mm)
0
200 0
200 0 0 500 500
4
5 0 5 1
0 12 23 34 4
5 200 05 200 10 12 23 34 4
5 5
Load (kg) Load (kg)
ion (mm)
Deflection (mm) Deflection (mm)
Deflection (mm) Deflection (mm)
Deflection
900 (mm) 900
MD
B B Load (kg) Load (kg) FDA FDA
100 100 MD 150 150 600 600
80 80
70 70 C
MD DC FDA-125 FDA-125
60
Load (kg) Load60(kg)
4
SANDWICH
0
SANDWICH
0
M
600 Load
600
125 (kg) Load
125(kg) SANDWICH
SANDWICH
700 450 700 450
50
10000 1000050 DD D4 16000 16000
M MD FDA-100 FDA-100
40 40 100 100 300 300
30 30
8000 8000 FDA-75 FDA-75
25 25 75
12000 1200075 150 150
20 20
FDA-50 FDA-50
6000
15 6000 50 50 0
15 0
8000 8000 0 4 80 124
FDA-25 FDA-25
10 10 25 25
4000 4000
1 11.5 2 1.5 2 3 4 3 5 4 5
Load (kg) Load (kg)
Deflection (mm)
Deflection (mm) 40000 40000 3600 3600
4
5 2000 5 2000 0 05 5 10 1015 1520 20
Errors and Omissions Excepted (E&OE).
3300
ion (mm) Load
Deflection (kg)
(mm) Load (kg) SCB LoadSCB
(kg) Load (kg) Deflection (mm) SCB
Deflection (mm) SCB
3000
3300
800 01
Load 0(kg) 12 23 34 45 5
SC
Load
700 (kg)
0 (kg)
01 12 23 34 45 700 5 Load (kg)
B
2400
95
600
900 900 600 6001800 1800
600
500
Deflection (mm)
Deflection
500
(mm) Deflection (mm)
Deflection
2100 (mm)
500 500 2100
400 FDA1-750 FDA1-750 400 FDA2-1500 FDA2-1500 1800
750 750 400 1500 400
1500 Load (kg) Load (kg)
1800
300 300 5 5 1500 1500
300 300 B9 B9
900 900
250 250 SC SC 65 5
600Load (kg)600
250
Load (kg) MD 1200 MD 250
1200
B6
0-
1200
0 -6 1200
SC
B6
SC
200 200
200 200 SC
B
750 750
60
AA AA 0 0
B5
-6
150 MD
MD MD
MD 150
B5
600
-6
SC
SC
5
SC
B B
B
D 50 D 50 -700 -700
300
50
SC
33
80 80 0 3 60 93
B
MD
B
M S 0
45
00 00 70 0 00
45
60
60 60 FDA1-2 FDA1-2 60 70 FDA2-4
Email: avm@iac-acoustics.com FDA2-4450 450
60 40 FDA1-1D 5040 FDA1-150 60
50 50
MD
D
MD FDA2-300 FDA2-300
15050
40
150 50
40
50 300 50300 Shop: View
5
our online shop for AVMs
Load
300(kg)
SC
5
40 40 B2 Load
300 (kg)
SC
40 40 B2
B
SC
B
SC
25
2700
25
2700
www.iac-acoustics.com
Product Description
Applications
VIKASH200-60
1200
800
VIKASH150-60
E
0 VIKASH200-40
D 125-6
ASH
400 VIK VIKASH150-40
øF
VIKASH125-40
0
0 3 6 9
Deflection (mm)
D
E
27500
B
20000
G
VIKASH300-40
12500
“V”support of engine
5000
4 6 8 10
Deflection (mm)
Dimensions 40 Sh 60 Sh
Weight
Type B D E F G (kg) Max Load Deflection Max Load Deflection
Errors and Omissions Excepted (E&OE).
Web: www.iac-acoustics.com
34 Email: avm@iac-acoustics.com 34
Product Description
Our rails are especially suited for the isolation of heavy equipment.
Since the rails can be cut to any size, the isolation of foundations,
lathe machines, mills, punching machines or any other suitable
application, can be individually designed. In addition to being able to
tailor the length of the rail, holes can also be drilled and threads cut
easily into this highly adaptable range of mounts.
H
Deflection S (mm) is from test subjects in dimension: (Length=2 x Width)
with the steel thickness marked with *
ST
B
1 14 31 67 4 96 216 471
25 25 2000 5*,10 3 45 100 216 50 50 2000 5*,10 8 206 462 1006
5 83 182 392 12 337 749 1625
2 20 47 103 4 83 188 410
25 30 2000 5*,10 4 44 99 217 50 55 2000 5*,10 8 176 397 868
8 102 227 496 12 282 635 1385
2 32 71 155 1 168 330 677
30 30 2000 5*,10 4 68 152 329 60 30 2000 5,10* 3 573 1116 2282
8 161 352 760 5 1110 2143 4360
1 88 175 364 1 102 209 435
40 20 2000 5*,10 3 313 618 1272 60 35 2000 5,10*,15 3 336 680 1416
5 648 1260 2573 5 621 1247 2585
3 76 168 363 4 183 398 856
40 35 2000 5*,10 6 167 365 787 60 50 2000 5,10* 8 404 871 1866
9 279 604 1298 12 681 1453 3099
3 49 112 246 4 128 286 620
40 45 2000 5*,10 6 105 237 517 60 60 2000 5,10*,15 8 273 607 1317
9 167 376 821 12 442 976 2112
3 137 293 626 4 80 184 404
50 35 2000 5*,10 6 303 644 1371 60 80 2000 5,10* 8 167 381 838
Errors and Omissions Excepted (E&OE).
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 35
Shop: View our online shop for AVMs
www.iac-acoustics.com
ST ST
H
H
ST ST ST ST
B B B B
Web: www.iac-acoustics.com
36 Email: avm@iac-acoustics.com 36
ST ST
H
H
ST ST ST ST
B B B
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 37
Shop: View our online shop for AVMs
www.iac-acoustics.com
Product Description
Applications
C
B
F
G
B
G
ØA
D1
CMH060
D2
E
C
CMH070
D1
D2
F
E
CMH180
F
CMH080
B
CMH220
F
G
CMH110
CMH150 D1
D2 D1 D1
D1
D2
E
E D2 D2
E E
F
A B D1 D1 D2 E F D1 G
Type C
Ø (mm) (mm) (mm) D2 (mm) (mm) (mm)D2 (mm)
CMH060 63 35 M10 or M12 76 E 90 110 9 E 2.5
CMH070 65 35 M12 100 - 120 15 3
CMH080 83 35 M10 or M12 108 110 135 11 3
CMH110 106 42 M12 or M16 138 146 171 12.5 3
CMH150 155 53 M16 176 188 216 14 4
CMH180 183 86 M20 146 - 180 14.5 5
CMH220 220 105 M24 180 - 220 17.5 6
Web: www.iac-acoustics.com
38 Email: avm@iac-acoustics.com 38
70Sh
90 150
60Sh 60Sh
60 100
40Sh 40Sh
30 50
0 0
0 1.5 3 4.5 0 1.5 3 4.5
Deflection (mm) Deflection (mm)
60Sh
100 400
50Sh
40Sh
50 200 40Sh
0 0
0 3 6 9 0 3 6 9
Deflection (mm) Deflection (mm)
1500 1500
50Sh
1000 1000
60Sh 40Sh
0 0
0 5 10 15 0 6 12 18
Deflection (mm) Deflection (mm)
70Sh
3750
60Sh
Errors and Omissions Excepted (E&OE).
2500
45Sh
1250
0
0 7.5 15 22.5
Deflection (mm)
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 39
Shop: View our online shop for AVMs
www.iac-acoustics.com
Product Description
The design of the BRB captive mount makes the rubber work in both
shear and compression with an optimum balance between flexibility
and horizontal stability. The relatively high height of the BRB range
offers great flexibility, low natural frequencies and excellent vibration
isolation.
Technical Characteristics
• Top metal cap protects the rubber against fuel and oil
• Metal parts are electro galvanised for long life
• Designed as a secured mount to ensure that the top and bottom
mounting plates are always connected, even when subjected to 40 Sh. 50 Sh. 60 Sh. 70 Sh.
high shock loads Type Max Load Max Load Max Load Max Load
(kg) (kg) (kg) (kg)
• The base plate is marked with mount type and hardness, making
them easy to identify even after many years of use BRB50 20 40 60 80
BRB60 30 45 65 75
Applications BRB65 50 75 120 140
BRB70 50 75 120 140
The product is tailored to mobile and marine plant equipment that
BRB80 M10 80 130 175 235
require high vibration isolation and good stability. BRB mounts are
also suitable for isolation of axial and radial shock. BRB80 M12 80 130 175 235
BRB110 M12 200 305 420 450
This mount can also be used for passive isolation of equipment that is BRB110 M16 200 305 420 450
near or on machines that vibrate. It could be a control or fuse box that BRB125 310 450 700 900
has to be both protected against vibrations and at the same time be
BRB150 450 570 800 1000
secured from falling.
BRB180 875 1110 1700 2630
The captive mount design provides good protection of the rubber BRB220 1600 2400 3400 4200
against dripping oil and fuel and also gives protection against UV light.
The BRB mount also provides excellent vibration isolation to marine
and mobile plant equipment, compressors, pumps and fans etc.
ØA
C
F
ØA
C
B
F
G
B
G
BRB050
D1
D2
E
BRB060
BRB125 ØA
BRB065
D1
F
D2
C
E
BRB150
F
BRB070
BRB180
F B
BRB080
BRB220
G
BRB110 D1
Errors and Omissions Excepted (E&OE).
D2
BRB150 E D1 D1
D1
D2
E
D2 D2
E E
F
D1 D1
D2 D2
E E
Web: www.iac-acoustics.com
40 Email: avm@iac-acoustics.com 40
5000
5000 5000
5000
Load (kg)
Load (kg)
Load (kg)
Load (kg)
BR BR 70 70
B B 0 0
4000
4000 22 22 4000
4000 22 22 60 60
3500
3500 BR BR 0 0 B B 0 0
B B 70 70 3500
3500 BR BR 22 22
3000
3000 22 22 B B
0 0 3000
3000
60 60 BR BR
2500
2500 BR BR 2500
2500 50 50
0 0
B B
22 22 22 22
B B
2000
2000 BR BR 0 500 50 2000
2000 BR BR
B B
BR BR 18 18 40 40
0 0 60 60 0 0
1500
1500 B B 60 60 1500
1500 0 0 22 22
22 22
0 0
BR BR 0 0 18 18 B B
40 40 B B BR BR 7 7 B B BR BR
15 15 B B 0 0 BR BR
0 0 12 12
70 70 5 5
15 15
B B
1000
1000
70 70 BR BR 60 60 40 40
1000
1000 0 0 0 0
BR BR 15 15 18 18
B B B B
800
800 B B
15 15 BR BR 800
800 BR BR 50 50BR BR
B B BR BR 0 0 B B 0 0
700 R B R B
700 60 60 BR BR 125125 700
700 15 15
18 18 B B B B 0 0
15 15 R R B B 7 7 RB RB 40 40
600
600 0 0 0 0 B BB B 95 95 60 60 600
600 0 0 B B 0 0
40 40 50 50 R R11 11
B B0 0 BR BR 70 70 11 11 15 15
500
500 BR BR 1 1 B RB B B
B B 7 7
25 250 0 B B 500
500 R
15 15 50 50 95 95 B B BR0BR0
400
400
0 0
40 40 BR BR 60 60
400
400 60 60 5 5
0 10
B B 0 0 1
11 11 11 11 1 1
BR BR 0 0 B B B B
B B 60 60 BR BR BR BR BR BR
300
300 11 11 300
300 70 70
0 0 BR BBR8B 8 80 8070 70 40 40
250
250 5 5
0 0 B B0 7 0 7 250
250 B B65 65 60 60 0 0 10 10
70 700 0
B BR
BR RBB B 70 70 BR BRRB RB 80 80 5 6 5 6 B 1B 1
B B 6 6 R R
200
200 BR BR B R B70 70 R B R B & &
BR BR 200
200 B B B B
& & BR BR RB RB0 0 B B
95 9560 60 80 80
B B
11 11 40 40& & 60 60 B B 70 70 B B5 5
& &80 80
BR BR 65 65 0 0
150
150
0 0
40 40 B B 70 70 150
150
7 7
B B 60 60B B
BR BR
B B
65 65 BR BR 70 70BR BR 50 50
80 80 60 60 R B RB 65 65
50 50 B B B RB
R
B B
100
100 B B 100
100 70 70 & & 0 0
BR BR R B R B 6 0 6 0 50 50 4 4
BR BR B B 50 50 R B R B 7 7 60 60 65 65
0 0
8080 B B B B
R BR B 6 6 7 0 70 70 70 8080 B 0B 0R R B B 0 00 0 B B
BR BR 50 50 7 7B 4B0 40B 6B0 66 0 6BR BR
7070 B B 80 800 600 60 & & BR BR 7070 50 50 80 80BR BBR5B 50 &0 &
70 70 40 40 BR BR B B
4 0 4 0 BR BR B B B B R R 4 4
6060 & &B B
B B
65 65 60 60 6060 BR BR BR BR B B70 7500 50
BR BR60 60 50 50 70 70 B R B0 0
5050 B B 50 50 R
B BB B 650 50
6
5050
65 65 0 0
40 40 BR BR BR BBR5B 5
4040
BR BR B B
50 50
4040 BR BR 4 0 4 0
B B 60 60 60 60
50 50 B B
3030 BR BR 50 50 3030 BR BR
BR BR
2525 B B
B B
60 60 2525 40 40
50 50 40 40 50 50
40 40 R B RB
2020 2020 B B
1515 1515
A B D1 D2 E F G Weight
Type C
Ø (mm) (mm) (mm) (mm) (mm) (mm) (mm) (g)
BRB50 50 25 M8 63 70 85 6.5 2 100
BRB60 64 35 M10 76 91 110 9 2.5 225
BRB65 65 35 M10/M12 76 91 110 9 2.5 243
BRB70 65 35 M12 100 - 120 11 3 253
BRB80 M10 83 35 M10 108 110 130 9 3 398
BRB80 M12 83 35 M12 108 110 130 9 3 398
BRB110 M12 106 41 M12 137 149 170 12.5 3.5 857
BRB110 M16 106 41 M16 137 149 170 12.5 3.5 857
BRB125 123 48 M16 154 162 190 14 4 1170
BRB150 155 53.5 M16 176 188 218 14.5 4 1840
Errors and Omissions Excepted (E&OE).
BRB150 RECT 155 53.5 M16 125 132 164 14.5 4 2030
BRB180 183 86 M20 146 146 180 14.5 5 3100
BRB220 225 105 M24 180 - 220 18.5 6 6716
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 41
Shop: View our online shop for AVMs
www.iac-acoustics.com
Product Description
Applications
A B D1 D2 E F G
Type C
Ø (mm) (mm) (mm) (mm) (mm) (mm) (mm)
CML060 63 35 M10 - M12 76 90 110 9 2.5
CML080 77 30 M10 - M12 108 110 135 15 3
CML095 93 35 M10 - M12 122 124 144 10 2.5
CML110 106 38 M12 - M16 138 146 171 12.5 3
CML125 121 42 M12 – M16 156 158 190 13.5 3.3
CML150 155 48 M16 176 188 216 14 4
CML160 162 59 M20 - 140 170 14.5 4
CML180 180 66 M20 149 163 192 14.5 4
CML220 220 105 M24 - 180 220 17.5 6
ØA
CML160 and CML220 have round
C mounting holes, not slotted.
F
ØA
B
C
G
B
G
CML060
D1
D2
E
ØA
CML080
CML160 C
F
CML095
F
D1
D2
CML180
E
CML110
B
CML220
F
G
CML125 D1
CML150 D2
E
D1
D2
D1 D1
D2 D2
F
E E
D1 D1
D2 D2
E E
Web: www.iac-acoustics.com
42 Email: avm@iac-acoustics.com 42
60Sh
150 150 200 45Sh
40Sh 45Sh
75 75 100
0 0 0
0 1.5 3 4.5 0 1.5 3 4.5 0 1.5 3 4.5
Deflection (mm) Deflection (mm) Deflection (mm)
70Sh 60Sh
60Sh
450 525 1500
60Sh 45Sh
300 350 1000
45Sh 40Sh
0 0 0
0 2 4 6 0 2 4 6 0 3 6 9
Deflection (mm) Deflection (mm) Deflection (mm)
0 0 0
0 3 6 9 0 3 6 9 0 4 8 12
Deflection (mm) Deflection (mm) Deflection (mm)
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 43
Shop: View our online shop for AVMs
www.iac-acoustics.com
Product Description
The design of the BSB captive mount makes the rubber work in both
shear and compression with an optimum balance between rigidity and
horizontal stability.
Technical Characteristics
• The top metal part protects the rubber from fuel and oil
• Metal parts are electro galvanised for long life
• Designed as a secured mount to ensure that the top and bottom
mounting plates are always connected, even when subjected to
high shock loads
• The base plate is marked with mount type and hardness, making 40 Sh. 50 Sh. 60 Sh. 70 Sh.
them easy to identify even after many years of use Type Max Load Max Load Max Load Max Load
(kg) (kg) (kg) (kg)
ØA
C
F
ØA
B
C
G
B
G
D1
D2
E
BSB060
BSB150 ØA
BSB080
F
C
BSB160
D1
D2
E
F
BSB095
BSB180
B
BSB110
F
BSB220
G
D1
BSB125
D2
BSB150 E
D1 D1
Errors and Omissions Excepted (E&OE).
D1
D2
E
D2 D2
E E
F
D1 D1
D2 D2
E E
Web: www.iac-acoustics.com
44 Email: avm@iac-acoustics.com 44
5000
5000 5000
5000
Load (kg)
Load (kg)
Load (kg)
Load (kg)
4000
4000 BS BS
B B 4000
4000 60 60
22 22 0 0
3500
3500 0 0 3500
3500 22 22
60 60 S BS B
3000
3000 BS BS BS BS 3000
3000 70 70 B B
B B 0 0 70 70
B B
16 16 18 18 18 18 0 0
0 0 0 0 B B 16 16
2500
2500 70 70 70 70 2500
2500 BS BS B B 0 0
0 40 4
BS BS BS BS 22 22
BS BS
B B 60 60 BS B
2000 B 2B 2
2000 18 18 2000
2000 0 0 S
B B
20 20 0 0 18 18
40 40 B B 60 60 B B
SBSB
BS BS BS BS 0 0
BS BS B B
1 1 0 70 7 0 0
1500
1500 B B
16 16
16 16
0 0
50 50 1500
1500 15 15 0 60 6 50 50
0 0 60 60 70 70 S BS B 16 16 160160
50 50 B B B B B B6 0 6 0
B B
S S BS B5S0 50BS BS0 0
BS BS B 1B 1 1 1 0 40 4
50 50 B B 8 8
B B BS BS BS BS B 1B 1
1000
1000 BS BS 180180 60 60 B B 1000
1000
BS BS 0 400 40
BS BS B 1B 1 40 40 12 12 0 0
B B 5 5 7 7 0 0 16 16
800
800 B B 5 0 5 0 S S
B B 70 70 5 5
12 12 5 65 6 B B
16 16 50 50 B B 1 1
25 25 BS BS
800
800
S BS B 12 12 BS BS
0 0 S S B B 70 70 B B
700
700 40 40 B B
12 12 6 6
0 0 B B 700
700 BS BS 0 0
5 55 5 0 0
5 5 11 11 0 0
11 11 12 12 0 40 4
600BS BBS B B B
600 50 50 0 0
70 70 600
600 BS B 6 0 60 BS B 15 15
S S S S 0 0 B B
15 15 B B
0 0 12 12
B B 0 0
11 11
B B 5 45 4 BS BS
500
500 40 40 5 5 B S B S 500
500 B B 12 12
40 40 BS BS B B
11 11 BS BS S
B B
BS B
B B 0 0 50 50
400
400 11 11 60 60 400
400 10 10
0 0
50 50 7 0 70 S BS1B 1
BS BS 80 80 B B 60 60
B B BS BS 70 70 B B
B B 95 95
300
300 95 95
60 60
BS BS S B S B B 9B 9 300
300 95 95 BS BS 70 70B B 0 0 0 0
B B 80 80 5 7 5 7 B B 60 60BS BS 5 55150 140 4
BS BS
B B
60 60 70 70 0 0 BS BS B B 0 0 9 91 1
250
250 BS BS BS BS
B B 50 50 BS B7S0 70 250
250 BS BS 0 70S7BSSBBS B
B B 70 70 B B 5 5B BB B
B B 9
11 11 S B S B 5 5 5 9 5 8 8 6 0 60 S BS B 40 40
200
200 0 0 0 0 0 0
60 60 200
200 80 80 B B 0 00 600 60 95 95
BS BS 40 40BS6B0S660 6 S BS B 0 50 56 6 S BS B
B B0 0 B B 8 8 B B B B
B B
95 95 5 0 05 B BBS BS60 60
40 40 60 60 BS BS 50 50
150
150 150
150 S BS B
B B
BS BS
B B 50 50
60 60 60 60
BS B
BS BS B B 50 50 S
B B
100
100 B B B SB
S 100
100 40 40 50 50
50 50 8 8 50 50
50 500 4 0 4 80 80 B B
B B
80 80
0 0
8080 BS BS BS BS
40 40
70 70 BS BS BS BS 7070 60 60
B B
60 60
B B
60 60
B B
80 80 6060 BS BS
BS BS 40 40
B B 50 50 40 40
50 50 50 50 5050 50 50
40 40 S BS B
B B
40 40 4040
30 30 3030
25 25 2525
6 6 7 7 8 8 9 9 10 10 11 11 12 12 14 14 16 16 18 18 20 20 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 1010
Natural
NaturalFrequency
Frequency
HzHz Deflection
Deflection(mm)
(mm)
A B D1 D2 E F G
Type C Weight (g)
Ø (mm) (mm) (mm) (mm) (mm) (mm) (mm)
BSB60 64 35 M10 76 91 110 9 2.5 235
BSB80 M10 79 30 M10 108 110 130 9 3 355
BSB80 M12 79 30 M12 108 110 130 9 3 351
BSB95 M10 95 35 M10 122 124 150 10 3 488
BSB95 M12 95 35 M12 122 124 150 10 3 488
BSB110 M12 106 37 M16 137 149 170 12.5 3.5 785
BSB110 M16 106 37 M16 137 149 170 12.5 3.5 785
BSB125 124 43 M16 156 158 192 14 3.5 1109
BSB150 155 49 M16 176 188 218 14.5 4 1818
Errors and Omissions Excepted (E&OE).
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 45
Shop: View our online shop for AVMs
www.iac-acoustics.com
Product Description
Technical characteristics
• Top metal part protects the rubber against fuel and oil
• Metal parts are electro galvanised
• The Marine mount is a secured mount designed to ensure that
the top and bottom mounting plates are always connected, even
M
when subjected to high shock loads
• The base plate is marked with mount type and hardness, making
them easy to identify even after many years of use
B
• The different degrees of stiffness in each axis, gives a stiff mount
in parallel with the propeller axel, so it can absorb the pressure
A
force from the propeller and lower stiffness perpendicular to the
engine crankshaft. The Marine mount has a different stiffness in
the 3 axes, providing long life for couplings and bearings, as well
J F
as effective vibration isolation for marine engines.
G
C
Applications
A B C D F G J Weight
Type M
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (g)
Small 120 38.5 60 100 14 11 11 M12 397
Medium 183 50 75 140 30 13 20 M16 857
Large 228 68 112 182 34 18 26 M20 2250
X-Large 330 112 190 270 22 22 26 M24 9600
Load (kg) Load (kg) Load (kg) Load (kg) Load (kg) Load (kg)
Type
35 Sh. 40 Sh. 45 Sh. 55 Sh. 65 Sh. 75 Sh.
Small - 35 45 70 95 110
Medium 95 - 120 220 280 400
Large 250 - 350 525 800 1080
Errors and Omissions Excepted (E&OE).
Web: www.iac-acoustics.com
46 Email: avm@iac-acoustics.com 46
3000
3000 MM 3000
3000
Load (kg)
Load (kg)
aarr
inin 7700
2500
2500 ee
XXLL 2500
2500 XXLL
MM
aarr 7700 rininee
r 6600
2000
2000 inin 2000
2000 MMaa XXLL
ee
XXLL irrninee
6600 MMaa
1500
1500 MM 1500
1500
aarr 5500
inin
ee XXLL
XXLL 55 rininee
r
5500 LLaa DD77 MMaa
1000
1000 MM rrgg 1000
1000 rriinnee
ee aa
aarr
inin MM eeMM 4400
ee aarr rrgg XXLL
800
800 XXLL LLaa inin
ee 800
800 LLaa CC6655 rininee
r
rrgg DD77 ee
700
700
4400 ee 55 700
700 rriinn MMaa
MM
aarr MMaa 5555
600
600 inin 600
600 rrggee eeBB
LLaa
ee
CC66 LLaa a
a rriinn
500
500 rrgg 55 eeMM
ee 500
500 rrgg
MM
aarr LLaa
inin MM 55
400
400 ee
BB55 eeddiuiu 400
400 55 AA44 DD66
55
LLaa 55 mm EE77 iinnee
rrgg MM irrninee MMaarr rininee
r
ee
MM aarr
inin MMaa ee MMaa
300
300 aarr MM ee 300
300 m LLaarrgg ddiuium
m m
inin
ee eedd EE77 eeddiuiu ee 55
250
250 AA44 iuiu 55 MM MM CC55
55 mm 250
250
MM rininee
r
200
200 MM
aarr
inin MMaa
eedd ee 200
200 m
m
iuiu
mm
DD66
eeddiuiu
55 MM
MM
aarr 4455
150
150 inin 150
150
ee ee BB
MM
CC55
aarrinin
eedd 55 MM
mm
iuiu
mm ddiuiu
MM MMee 3355
100
100 MM aarr 100
100 55 ee AA
eedd inin
ee SSmm DD66 aarrinin
iuiu e
e MM
80
80 mm BB44 aall
lMM rrinin m m
MM 55 SS 80
80 MMaa ddiuiu
70
70
aarr
inin mm
aa
aarr
inin 70
70 mmaalll MMee
ee lll ee SS
AA33 MM DD66 55
60
60 55 a arrinin 55 60
60 CC55
ee rrininee
CC55 aa
50
50 55 50
50 lllMM 55
SSmm
SSmmaa BB44
40
40
aal
llMM rrininee
40
40 aa
aarr lllMM 00
SSmm inin
ee SSmmaa AA44
30
30
aal
llMM
BB44
55 30
30 rininee
r
aarr aa
inin lllMM
25
25 ee
AA44 25
25 SSm maa
00
20
20 20
20
15
15 15
15
10
10 10
10
55 66 77 88 99 10
10 11
11 12
12 13
13 14
14 16
16 18
18 20
20 11 1.5
1.5 22 33 44 55 66 88 10
10
Natural
Natural Frequency
Frequency Hz
Hz Deflection
Deflection (mm)
(mm)
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 47
Shop: View our online shop for AVMs
www.iac-acoustics.com
Product Description
Applications
A A
D D
G
G
C
C
F
J J
F F
M M
B
A B C D F G J
Type M
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
Marine VS 120 38.5 60 100 11 14 11 M12
Marine VM 183 50 75 140 13 30 20 M16
Marine VB 228 74 114 182 18 35 25 M20
65Sh
75 55Sh 450 75Sh 750
55Sh
65Sh
50 45Sh 300 500
55Sh 45Sh
45Sh
25 150 250
35Sh
Errors and Omissions Excepted (E&OE).
0 0 0
0 2 4 6 0 2 4 6 0 3 6 9
Deflection (mm) Deflection (mm) Deflection (mm)
Graphs give the max compression load in relation to the individual rubber hardness’s of 45 Sh., 55 Sh, etc.
Web: www.iac-acoustics.com
48 Email: avm@iac-acoustics.com 48
Product Description
Applications
D A
H C
E F B
A B C D E F G H Weight
Type
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (g)
Marine VS AISI 316 100 120 60 60 11x14 11x14 M12 40 400g
Marine VM AISI 316 140 183 75 75 20x13 20x13 M16 50 860g
Load (kg) Marine VS (AISI 316) Load (kg) Marine VM (AISI 316)
120 600
75Sh
65Sh
90 450
55Sh
65Sh
60 300
45Sh
55Sh
30 150 45Sh
0 0
0 1.5 3 4.5 0 2 4 6
Deflection (mm) Deflection (mm)
Errors and Omissions Excepted (E&OE).
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 49
Shop: View our online shop for AVMs
www.iac-acoustics.com
Product Description
Applications
Marine propulsion engines, generator sets, diesel engines, vehicles,
pumps and compressors.
220mm M16
M24
Load (kg) Marine VL Load (kg) Marine VX
73mm
1000 4000
75Sh
112mm
65Sh
70Sh
750 3000
13mm
60Sh 220mm
55Sh
500 2000
45Sh 188mm
50Sh
135mm
190mm
250 1000
112mm 40Sh 33mm
0 0
0 3 6 9 0 3 6 9
Deflection (mm) 270mm Deflection (mm)
330mm
220mm M16
M24
112mm
220mm
188mm
rine VL Load (kg) Marine VX
4000
135mm
190mm
112mm
70Sh
3000
60Sh
Errors and Omissions Excepted (E&OE).
2000 270mm
330mm
50Sh
1000
40Sh
0
9 0 3 6 9
ction (mm) Deflection (mm)
Web: www.iac-acoustics.com
50 Email: avm@iac-acoustics.com 50
Product Description
The CMD captive mounts is used for engines / equipment with large
amplitudes caused by imbalance. It is designed with an integral
overload stop which controls the movement of equipment during
transit and provides a fully failsafe arrangement. CMD mounts are
suitable for both mobile and static applications.
The CMD is a cost effective, high performing and easy to install mount
using universal fittings for a wide range of applications.
Applications
64mm
Load (kg) CMD M12
160
34mm
CMD-0
2.5mm
120
CMD-2 76mm
80
CMD-3
9.5mm
40
0
0 1.5 3 4.5 93mm
Deflection (mm)
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 51
Shop: View our online shop for AVMs
0 0
www.iac-acoustics.com 0 1 2 3 4 5 0
Deflection (mm)
Product Description
8000
12000
The MD mount has a similar design to BSB and BRB. The benefit of
this mount is that the rubber compound has high internal damping. 6000
8000
The special rubber compound in the type MD mount provides good
4000
vibration isolation and stability to equipment with high amplitude
vibrations. 4000
2000
Technical Characteristics
0 0
0 1 2 3 4 5 0
• Top metal part protects the rubber against fuel, oil and UV rays
• Metal parts are electro galvanised Deflection (mm)
• The MD captive mount is a secured damper designed to ensure
that the top and bottom mounting plates are always connected,
even when subjected to high shock loads.
Load (kg) MD
150
Applications MD
MD
AA
B
100 MD
This mount is specifically designed to isolate motors, which produce 80
high amplitude vibrations. 70 C
60 MD
0
50 D4
MD
Engines with 1-3 cylinders, motor pumps, generators, compressors, 40
fans, etc.
30
25
This captive mount is suitable for engines and machinery that start 20
and stop frequently. By starting and stopping an engine, it goes
15
through the resonant frequency for the system, which amplifies the
vibrations, this is why the MD mount is made with a rubber compound 10
with high internal damping. The MD mount is also preferred under 1 1.5 2 3 4 5
machines with normal speed close to the system’s resonant Deflection (mm)
frequency.
Load (kg) SCB Load (kg)
1000 1000
MD mounts can be used for diesel engines with few cylinders,
800 800
SC
especially when the cylinder diameter is large and has a short stroke
B
600 600
length. It often means that the engine has high amplitude vibrations M12
500 500
and thus requires additional damping to stabilise the engine.
34mm
400 400
2.5mm
300 300
250 250
Type Max Load (kg) Mount Weight (g)
SC
200 200
B
60
MD A 130 238
m
-6
150 150
5
64
SC
B
MD B 105 238
Ø
50
m
5m
100 100
MD C 70 238
9.
SC
80 80
B
45
MD D 40 50 238 70
60 60
50 50
SC
40 40
B
25
76mm
30 30
25 25
SC
20 20
15 15
10 10
10 15 20 30 40 50 60 75
Product Description
Technical Characteristics
• The Hydromount is a secured mount designed to ensure that
the top and bottom mounting plates are always connected, even
when subjected to high shock loads
• The mount is very robust and is recommended for vehicles that
operate in uneven terrain
• Metal parts are electro galvanised
Applications
Hydromounts are primarily designed for vibration isolation and
stability of cabs in vehicles used in rough terrain, agriculture, forestry,
etc. In addition to vibration isolation and stability the mount also offers
excellent comfort for the operator of the vehicle.
H
F D1
C
I
D1
D2
K2
K1
J
E
E
B
A
H
G
Type Load (kg) 40 Sh. Load (kg) 50 Sh. Load (kg) 60 Sh. Load (kg) 70 Sh.
Mini 20 30 50 70
Small 60 100 145 180
Medium + Medium Rect. 100 150 200 250
Large + Large Rect. 235 295 345 410
AØ B C D1 D2 K1 K2 E F G H I J
Type
Errors and Omissions Excepted (E&OE).
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
Mini 45 60 30 64 73 - - 88 90 - 8.2 3 M8
Small 63 88 36 99 109 - - 132 90 40 11 5 M10
Medium 63 96 45 99 109 - - 132 90 40 11 5 M12
Medium Rect. 63 96 45 64 70 79.5 82.5 102 92 - 10.2 5 M12
Large 105 115 55 130 145 - - 180 110 49 11 5 M16
Large Rect. 105 115 55 110 110 110 110 130 130 - 12 5 M20
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 53
Shop: View our online shop for AVMs
www.iac-acoustics.com
100
Load (Kg)
Stiffness N/mm
70 i 70
70 in i 300 M in
droM d ro
Hy i 60
Hy i 60
50 M i n M in
d ro dro
Hy 200 Hy
i 50
30 i 50 Mi n
M in 150 dro
dro Hy
Hy
20 i 40 125 i 40
M in M in
Mini
dro 100 d ro
15 Hy Hy
80
10
60
5 40
30
1 2 3 4 5 6 7 8 3 5 10 15 20 25 35 50 60 80
Deflection (mm) Frequency (Hz)
Stiffness N/mm
Load (Kg)
150 0
a ll 6
0 Sm
m all 6 d ro
100 ro S Hy
Hy d
70 40
mall ll 4
0
ro S Sm
a
50 Hyd d ro
Hy
30
Small
20
300
15
10
200
5
150
125
100
1 2 3 4 5 6 7 8 3 5 10 15 20 25 35 50 60 80
Deflection (mm) Frequency (Hz)
350
Load (Kg)
300 0
m7
ediu
ro M 30
200 Hyd
0
m6 ±1mm
150 M ediu
Hy dro
5 0
ed ium
100 ro M ±3 mm
Hyd
Medium
0
m4
70 e diu 20
ro M
Hyd
50
30 15
20
12
15
10 10
1 2 3 4 5 6 7 8 2 4 7 10 15 20 26 35 50
Deflection (mm) Frequency (Hz)
3000
350
Stiffness N/mm
Load (Kg)
300 e6
0 60
0 2500 ge
L arg g e5 Lar
dro Lar d ro
Hy ro Hy
200 Hyd 2000
150
1500
60
ge
1250 Lar
100 d ro
Hy
1000
70
Large
50 750
Errors and Omissions Excepted (E&OE).
30
500
20 400
15
300
10
1 2 3 4 5 6 7 8 3 5 10 15 20 25 35 50 60 80
Deflection (mm) Frequency (Hz)
Web: www.iac-acoustics.com
54 Email: avm@iac-acoustics.com 54
Product Description
The CHM mount consists of two rubber parts, where the centre of
the mount has a metal tube embedded to reduce wear on the rubber,
giving a longer life.
This vibration mount is ideal for use where there are large dynamic
loads, and where a high level of stability is required. This could, for
example be under the cab of many types of vehicles. The CHM mount
offers a good level of damping against shock and vibration.
Applications
G
A
B Q
øF
R (Radius)
C
T
D
45 Sh. 60 Sh.
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 55
Shop: View our online shop for AVMs
www.iac-acoustics.com
Product Description
The SCH mount consists of two rubber parts and an embedded metal
tube that reduces wear on the rubber and gives longer life.
Technical characteristics
This vibration mount is ideal for use where there are large dynamic
loads, and where much stability is required. This could, for example be
under the cab of many types of vehicles. SCH mounts offer, in addition
to optimal stability, good damping of shock and vibrations.
Applications
• Vehicle cabs
• Agricultural and forestry machinery
Sample Guide
G
SCH mounts should be assembled according to the following
installation instructions:
A
ØF B
There are two possible configurations, please see below. They can be R Q
(R
ad Anti-rebound washer
iu
C
installed in plates of varying thicknesses depending on Tmax and Tmin s)
Suspend
values as indicated in the following table. The mount deflection curve unit
T
D
will vary in response to mounting plate thickness.
E
Chassis of the
machine
Chassis
Chassis of the
machine
Chassis
Chassis of the Anti-rebound washer
machine
Suspended
45 Sh.
unit 50 Sh. 60 Sh.
Web: www.iac-acoustics.com
56 Email: avm@iac-acoustics.com 56
Chassis Mounts
Load (Kg) SCH
Load (Kg)
ax
SC
2500 2500
Tm
H9
60
06
90
0T
2000 H in
2000 SC
ma
SC
Tm
H9
0 60
06
9
H
0T
1500 SC
mi
1500
n
ax
SC
Tm
H6
60
65
56
ax
SC
1000 H
1000 m
0T
SC
H9
5T
ma
4
04
90 in
x
5T
SC
H
800 SC 0 Tm
ma
H 6 50 60
800
SC
6
x
65
56
in
H
SC
700 H
0 T max
700 m
SC 5T
H9
mi
4
04
90
n
600
T
H
5T
600
SC
mi
n
500
SC
500
H6
ax ax
SC
Tm
54
in 5 Tm
SC
60
H5
5T
400
H6
50 Tm 5 4
06
400 in
ma
60 H 6
54
H
SC Tm
0T
50 SC
x
5T
45
mi
H 5
m
SC 6
n
in
300 H
SC
SC
300
H5
ax
04
250 m
5T
5T
250 4
ma
50
H
x
200 SC
200
SC
H5
in
04
150 Tm
5T
45
50
mi
150
n
H
SC
100
100
80
70 80
70
60
60
50
50
40
5 8 10 12 16 20 25 30 1 1.5 2 3 4 5 6 7
Natural Frequency (Hz) Deflection (mm)
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 57
Shop: View our online shop for AVMs
www.iac-acoustics.com
Load (kg) Load (kg) SANDWICH 600
SANDWICH
Load (kg) 600 Load (kg) SANDWICH 700
SANDWICH 700
10000 10000 16000 16000
8000 8000
Product4000
Description4000
4000 4000
SCB mounts2000consist of two
2000rubber parts with a metal tube inside. The
metal tube reduces wear on the rubber and gives longer life. The SCB
mount is designed
0
0
to reduce
1
0 both tensile and compression forces.
0 2 1 3 2 4 3 5 4
0
0 5 1
0
0 2 1 3 2 4 3 5 4 5
300 300
30 30 B
B
25 25 150 150
R R
T
20 20
15 15 0 0
0 4 8 012 4
16 20
8
D D
10 10
1 1.5 1 2 1.5 3 2 4 35 4 5
Q Q Load (kg) Load (kg)
Deflection (mm) Deflection (mm) 3600 3600
3300 3300
Load (kg) Load (kg) SCB Load (kg)SCB Load (kg) SCB 3000
SCB 3000
1000 1000 1000 1000
800 800 800 800 2700 2700
SC
SC
B
95
SC
900 900
60
60
0 0
B5 B5
-6
-6
5
SC
SC
SC SC
B
300 300
50
50
SC
80 80 80 80 SC SC 0 3 6 09 12
3 15
6
B
B
45
45
70 70
60 60 60 60
50 50 50 50
5 5 Load (kg) Load (kg)
SC
SC
40 40 40 40 B2 B2
B
SC SC
25
25
2700 2700
30 30 30 30
0 0
25 25 25 25 B2 B2 2475 2475
SC
SC
SC SC
B
B
20
20
20 20 20 20 2250 2250
2025 2025
15 15 15 15
1800 1800
10 10 10 10 1575 1575
1350 1350
1125 1125
900 900
10 15 20
10 30 40
15 20
50 30
60 40 7550 60 75 0.2 0.50.2 1 0.51.5 2 2.51 3 1.5 2 2.5 3
675 675
Natural Frequency
Natural
(Hz) Frequency (Hz) Deflection (mm) Deflection (mm)
450 450
225 225
Washers are
0
available for
0
each size of mount as an additional part,
0
please contact
0
IAC Acoustics for details.
0 3 6 09 12
3 15
6 18
9 21
12 15
24 18
27 21
30 24 0 27 3 30 6 09 12
3 15
6 18
9 21
12 15
24 18
27 21
30 24 27 30
Web: www.iac-acoustics.com
58 Email: avm@iac-acoustics.com 58
Flexible Bushings VP
Product Description
Applications
The VP range has a very high noise and vibration insulating properties
which makes it ideal for construction machinery.
β
β
Tolerances: Fr
d: 10-25 ± 0.1
30-50 ± 0.2
α
Fa
D: + 0.25 Mb d
D
+ 0.05
α
l: ± 0.5
l
L: + 0 L
– 0.2
60° Sh. ± 5 Sh. Mv
VP40/70120 4000 3775 1800 175 240 11 22.0 2520 6 420.0 40 70 120 110
VP45/7570 2400 2000 1000 110 240 12 20.0 320 7 45.0 45 75 70 60
VP45/75130 4000 4235 2000 215 340 10 34.0 5040 6 840.0 45 75 130 120
VP50/8075 2850 3000 1200 135 275 11 25.0 700 7 100.0 50 80 75 65
VP50/80140 4900 4370 2350 265 450 10 45.0 5160 6 860.0 50 80 140 130
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 59
Shop: View our online shop for AVMs
www.iac-acoustics.com
Flexible Bushings GE
Product Description
Applications
The elastic bushing also has good vibration and noise reduction
qualities that will make machinery more pleasant to work with.
Examples of use are in the flexible connectors in cars, train carriages,
tractors, agricultural machines etc.
β
β
Fr
Tolerances:
α
Fa
d: H 9 Mb d
D
D: s 6
α
l: ± 0.5 l
L: ± 0.1 L
Web: www.iac-acoustics.com
60 Email: avm@iac-acoustics.com 60
Product Description
Technical Characteristics
The conical absorber is a safe and stable mount because it does not
allow the equipment to overturn or tilt. They are also flexible enough
to prevent transmission of sound and vibration through the structure.
The 2 mounting washers protect the rubber against ozone, ageing and
Type 00 Cone Type 01 Cone Type 10 Cone
dripping oil. The load / deflection curve for when the mount is fitted
ø8.2 38 ø12
with both washers will progressively increase with heavier loads.
Ø8.2
Installed with the washers, the conical mount can dampen an overload
7.2
18
2.5
12
31
52
29
2
2.5
ø38
Applications 46
ø54
ø46 84
ø60
Cone mounts can be used where there is a requirement for minimal
equipment height increase and high radial stability, which this mount
6.5
68
provides.
50
Ship equipment, mobile units, vehicle cabs, trucks and engine
84
70
61
106
84
78
6.5
50
11
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 61
Shop: View our online shop for AVMs
www.iac-acoustics.com
800 800
Load (Kg)
0
Load (Kg)
-7
35
700 700 35
-7
0
600 600
500 500
0
35
-6
-6
400 35
0
400
0
35
300 -5
30
-5
300 35
-6
0
-6
0
250 30
35
250 5
-4 0
-4
35 - 7
5
200 10
20
200
-6
0
-6
0
20
150
150
30
0
10
-4
-6 0
0
10 -4
-6
20
30
0
45
-4
-
5
100 20
100
80
00
80
70 5
-7
10
-7
10
0
-4
00 5
-7
70
-4
5
60
0
10
60
50
00
50
-6
40 0
0
-6
40
00
30
30
00
25
-4
5
25 5
20
-4
00
20
15
15
10
6 7 8 9 10 11 12 14 16 18 20 22 1 1.5 2 3 4 5 6 7
Web: www.iac-acoustics.com
62 Email: avm@iac-acoustics.com 62
Type
Type 00 02 Cone
Cone Type 10 Cone Type 11 Cone
18
13
13
2
18
2.5
31
2.5
37.5
52
2
52
52
ø38
ø46 38 ø54
54
48 ø60
60
69.4
68
84
70
61
11
68 68
9
106
84
78
78
6.5 84
72.4
50 88.4 106
11
TypeType
20 Cone
Type
20 Cone
20 Cone TypeType
21 Cone
Type
21 Cone
21 Cone TypeType
30 Cone
Type
30 Cone
30 Cone
75 75 75
76 76 76
38 38 38 16.5 16.5 16.5
ø 16 ø 16 ø 16 16 16 16
13
13
13
29
29
29
4
4
4
59.5
59.5
59.5
37.5
37.5
37.5
77
77
77
40
40
40
92 92 92
106 106 106 107 107 107
70 70 70
64 64 64
16
16
64
64
64
92
92
92
70
70
70
16
16
16
64
64
64
92
92
92
70
70
70
79.5
82.5
79.5
82.5
79.5
82.5
106
106
106
.2
.2
10
10
70 70 70
TypeType
31 Cone
Type
31 Cone
31 Cone TypeType
35 Cone
Type
35 Cone
35 Cone TypeType
36 Cone
Type
36 Cone
36 Cone
ø 76 ø 76 ø 76 ø 90 ø 90 ø 90 ø 90 ø 90 ø 90
ø16.5 ø16.5 ø16.5 ø16.5 ø16.5 ø16.5 ø16.5 ø16.5 ø16.5
18
18
18
18
18
18
29
29
29
4
4
82.4
82.4
82.4
82
82
82
77
77
77
ø 76 ø 76 ø 76
ø 76 ø 76 ø 76
ø 95 ø 95 ø 95
Web: www.iac-acoustics.com
ø 76 ø 76 ø 76
63
ø 80 ø 80 ø 80
ø 95 ø 95 ø 95
Email: avm@iac-acoustics.com
120 120 120
Shop: View our online shop for AVMs
92 92 92
ø1
ø1
ø1
1
1
www.iac-acoustics.com
Conical Mounts
Load (Kg) Cone
Load (Kg)
2500 70 0
2500
-7 -7
0 70
2000 70 0
-6 2000 -6
1800 0 70
1800
60 0
1500 -7 1500 -7
0 60
60
-6 0 0
0 36 -7 -6
40 -7 36 60 0
1000 -7 0
1000 -7 5
70 6 31 0 40 70 0 - 4 5
-4 0 - -7 - 6 -4
5 45 0 3 1 0
800 7
40 800
700 -6 0
0 700 -6 -6
0
600 36 40
600
31
500 -6
500 0 0
0 -7 -6
40 21 31
400 -4
5 36 400
-4 5
5 -4
5 -4 40
300 21 36 60
31 - 0
-5 -6 300 21 -5
250 0 0 31
250 0
-7
200 36 11
-6 200 0
11 0 -6
21 -6 11
150 -4 0
5 5
150 -4
21
11
100 -4
5 11
02 -7 100 0
80 -6 0 --7 5
0 01 -4
0 11
70
01
80 -6
02
60 -6 70
0
0
01 60 -6
50 -4 01
5
50 5
40 -4
02 01 02
-4 70
5 40
5
30 -4
01
25 30
20 25
20
15
15
10
6 7 8 9 10 11 12 14 16 18 20 22 1 1.5 2 3 4 5 6 7
Natural Frequency Hz Deflection (mm)
Errors and Omissions Excepted (E&OE).
Web: www.iac-acoustics.com
64 Email: avm@iac-acoustics.com 64
116
16
64
64
92
92
64
92
70
70
70
116
16
64
64
92
92
64
92
6
www.iac-acoustics.com
70
70
70
79.5
79.5
82.5
82.5
79.5
82.5
106
106
106
RR5.1
5.1R 5.1
0..2
2
.2
79.5
79.5 79.5
110
10
79.5
79.5 79.5
82.5
82.5 82.5 82.5
82.5 82.5
70
70 70
Type
Type31
31Cone
Type Cone
31 Cone Type
Type35
35Cone
Type Cone
35 Cone Type
Type36
36Cone
Type Cone
36 Cone
øø76
76 ø 76 øø90
90 ø 90 øø90
90 ø 90
ø16.5
ø16.5ø16.5 ø16.5ø16.5
ø16.5 ø16.5
ø16.5ø16.5
18
18
18
18
18
18
29
29
29
4
4
4
4
4
4
4
82.4
82.4
82.4
82
82
82
77
77
77
øø7676 ø 76
øø76
76 ø 76
77
øø9595 ø 95 øø76
76 ø 76
øø80
80 ø 80
øø95
95 ø 95
120
120 120
92
92 92
øø1
ø1
111
1
12
12
12
RR5.1
5.1R 5.1
100
100
100
74
74
74
100
100
100
82.5
82.5
74
74
82.5
74
79.5
79.5
79.5
106
106
106
ø
ø1
ø11
11
1
90
90 90 90
90 90
64
64 64
106
70
70 70 120
120 120
Type
Type
Type
40
4040
Cone
Cone
Cone Type
Type 60
Type Cone
6060
Cone
Cone Type
Type
Type
70
7070
Cone
Cone
Cone
øø75
75
ø 75 110
110
110 øø110
110
ø 110
øø21
21
ø 21 øø20.5
ø 20.5
20.5 øø24.5
24.5
ø 24.5
26.5
26.5
26.5
19.5
19.5
19.5
21
21
21
5.5
5.5
5.5
5
5
5
5
5
5
89.4
89.4
89.4
86
86
86
145
145
145
24.5
24.5
24.5
54
5454
øø67
67
ø 67 115
115115
øø75
75
ø 75
øø72.5
72.5
ø 72.5
øø95
95
ø 95
øø112
112
ø 112
R
R6
R 66
1111 11
6
66
RR55R 5
33 3
11.5
11.5
11.5
51
51
51
101
101
101
123
123
123
120
120
120
92
92
92
98
98
98
97
97
97
øø1133
ø.5
13.5
.5 97
9797
98
9898
101
101101
111
111111 123
123123
140
140
140
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 65
Shop: View our online shop for AVMs
www.iac-acoustics.com
Conical Mounts AT
Product Description
The radial elasticity of the AT range is ¼ of its axial elasticity. It is AT mounts can be used where there is a requirement for minimal
manufactured in three different hardness’s. Soft: hardness A (45 Sh.), equipment height increase and high radial stability, which this mount
Medium: hardness B (60 Sh.), Hard: hardness C (75 Sh.). provides.
AT 70 165 140 66 46 60.2 118 22 145 10.5 - 2 700 900 1100 3124
AT 71 165 170 96 46 60.2 118 22 145 10.5 - 2 850 1100 1400 3790
AT 80 230 167 95 53 80 170 30 204 12.2 - 2 1250 1800 2300 7096
AT 81 230 185 113 53 80 170 30 204 12.2 - 2 1600 2100 2600 7702
Web: www.iac-acoustics.com
66 Email: avm@iac-acoustics.com 66
Conical Mounts AT
H I
G H
G I G
I
G
H J
øA øA
D
D
B
C
C
E E
F F
300 3000
Load (kg)
Load (kg) 5
250 7 5 75 07
21 60 2500 81 8
AT 21 AT AT
200 AT 0 0 06
0
75 6 2000 816 8
20 20 5 AT AT
150 AT AT 160 214 1800 5
7 5 T 1 AT 7 17 14
5
02 A 1500 AT 8
AT 60 45 AT
10 20 5 60 4 5
0 5 07 71 80
100 5
7 02 6 AT AT 114 7 AT AT
0 1
T AT 5 AT
AT A 60 45
4 0 5
80 10 1000 75 706 714
70 T 01 T 20 AT 0R AT AT
5 A A 7
60 117 45 800 AT 0 704
5
AT 01 700 R6 AT
50 AT 7 5 0 7 0
51 16 AT
600 AT AT5 5
40 5 75 0 R4
007 500 41 5 06 5 T 70
T 4
30 AT A AT 0 A
75 0 T5 60
25 400 31 7 5 3 16 AT41
T
A 75 40 AT A
30 AT 0
20 5 300 AT 4 06
004 AT 45 5
06
0 AT 250 T 31 414
15 0 0 A
AT 30
6 AT
200 AT
10 45
5 T 40 5
07 A 4
8 00 150 30
AT 60 AT
0 00
AT
45
5 0 00 100
AT
80
70
60
50
2
40
30
1 25
Errors and Omissions Excepted (E&OE).
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 67
Shop: View our online shop for AVMs
www.iac-acoustics.com
Product Description
Components
Elastical characteristics
1000
Vertical natural frequency from 3.5Hz.
Applications
0
5 0 1 2 3 4 5
FDA-125 C
125
FDA-100
100
FDA-75
75 A
FDA-50
50
FDA-25
25
0
0 5 10 15 20
Deflection (mm)
FDA2
FDA 75 with base plate 87 54 M8
-500
600 FDA2
FDA 100 80 00 54 M8
FDA2-4
FDA 100 with base plate 87 FDA 2 -3 00 54 M8
300
FDA 125 80 54 M8
FDA0 125 with base plate 87 54 M8
40 0 3 8 9 12 15 18 21 24 27 30
www.iac-acoustics.com
500 1000
Open Spring Mounts FDA1
0 0
5 0 1 2 3 4 5 0 1 2 3 4 5
ion (mm)
Product Description Deflection (mm) Deflection (mm)
FDA-125
• Steel spring 125
• Rubber insert
FDA-100
• Galvanised steel mounting plate (mounting plate is rubber coated 100
for FDA1-150, 200, 250 and 350)
• FDA1-150 to FDA1-350 have a steel with rubber baseplate and FDA-75
75
for the FDA1-500 to FDA1-0750 it is an all steel baseplate
FDA-50
50
Elastical characteristics
FDA-25
25
Vertical natural frequency from 2.9Hz.
Applications 0
5 0 5 10 15 20
Especially for machines running at low RPM’s such as gensets,
on (mm) compressors, fans, pumps, refrigerating units etc. ø ADeflection (mm)
750
FDA1-750 1500 C FDA2-1500
600 1200 B
FDA1-500 FDA2-1000
450 900
-350 F -700
FDA1 FDA2
-250 -500
300 FDA1 600 FDA2
00 00
FDA1-2 FDA2-4
15 0
150
F D A 1-
300 FDA2 00
-3
E
0 0
0 4 8 12 16 20 24 28 32 36 40 0 D3 8 9 12 15 L
18 21 24 27 30
1500 0
F -175
65 1200
FDA1-500 90 130 M14 -1000 1001500 120 12 150 FDA5 0
1 2 5
FDA4 FDA5
-
00
FDA4-8 0
900
FDA1-750 90 130 M14 1001125 120 12 150 1 0 0
FDA5 -
F D A 4- 60 0
600 750
300 375 FDA5-750
0 0
0 3 6 9 12 15 18 21 24 27 30 0 3 6 9 12 15 18 21 24 27 30
Deflection (mm) Deflection (mm)
Product Description
0
5 0 1 2 3 4 5
The FDA2 range is designed for the suspension of machines operating
(mm) Deflection (mm)
at more than 350 RPM, for loads ranging from 150 to 1500kg.
Components
Load (kg) FDA
• 150Steel spring
• Rubber insert
• Painted steel mounting plate FDA-125
125
For: FDA 2-300, FDA 2-400, FDA 2-500 and FDA 2-700, vertical natural
FDA-75
75
frequency is from 2.9Hz.
For: FDA 2-1000, FDA 2-1500, vertical natural frequency is from 3.7Hz.
FDA-50
50
Applications
FDA-25
25
Especially for machines running at low RPM’s such as gensets,
compressors, fans, pumps and refrigerating units etc.
0
0 5 10 15 20
Deflection (mm)
1500
FDA2-1500
B
1200
FDA2-1000
900 øD
-700
FDA2
-500
600 FDA2
00
FDA2-4
E
300 FDA2 00
-3
C
0
40 0 3 8 9 12 15 18 21 24 27 30
2625
FDA5-2500
FDA2-700
2250 200 124 75 12 170
1400 FDA2-1000
1875 250 134 100 14 210
50
5-17
FDA134
FDA2-1500 250 100 14 210
1000 1500
-1 50
2
FDA5
-800 1125 000
-600 FDA5-1
750
375 FDA5-750
0
30 0 3 6 9 12 15 18 21 24 27 30
mm) Deflection (mm)
Web: www.iac-acoustics.com
DA3
70 Email: avm@iac-acoustics.com 70
Multiple
450 Open Spring Mounts 900 FDA3 -700
-350 FDA2
FDA1
-250 -500
300 FDA1 600 FDA2
00 00
FDA 2
1 - FDA2-4
Product Description FDA1-150 F D A 2 -3 00
150 300
2025
C
1800
1575 FDA3-1500
øD
1350 B
0
1125 -105
FDA3
900 750
2 2.5 3 FDA3-
6 00
ion (mm) 675 FDA3-
FD A 3- 45 0
450
225
0
FDA9 0 3 6 9 12 15 18 21 24 27 30
Deflection (mm)
A B DØ
TYPE C
(mm) (mm) (mm)
FDA3-450 190 124 M16 12
0 FDA3-600 190 124 M16 12
-315
FDA9
Errors and Omissions Excepted (E&OE).
27 30
tion (mm)
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 71
Shop: View our online shop for AVMs
2000 25
www.iac-acoustics.com
0
5 0 5 10 15 20
1000
ction (mm)
Multiple Open Spring Mounts Deflection (mm)
FDA4 & FDA5
Load (kg)
0
FDA1 Load (kg) FDA2
5 900 0 1 2 3 4 5 1800
The600
FDA4 and FDA5 ranges are designed for the suspension of For: FDA 4-600 – 4-1400 and FDA 5-750 – 5-1750, vertical natural
1200
Load (kg) operating at more than 350
machines RPM, for loads rangingFDA
FDA1-500 from 300 frequency is from 2.9Hz. FDA2-1000
150
to 3750kg. For: FDA 4-2000, 4-3000 and FDA 5-2500, 5-3750, vertical natural
450 900
50 frequency is from 3.7Hz. 700
125 FDA1
-3FDA-125 DA2- F
Components -250 FDA2
-500
300 FDA1 600
FDA1-2
00
FDA-100 Applications FDA2-4
00
100
• 150Steel
spring FDA1-150 300 FD A 2- 30 0
• Rubber insert FDA-75 Especially for machines running at low RPM’s such as gensets,
75
• 0Painted steel mounting plate compressors,
0 fans, pumps and refrigerating units etc.
0 4 8 12 16 20 24 28 32 FDA-50
36 40 0 3 8 9 12 15 18 21 24 27 30
50
Deflection (mm) Deflection (mm)
FDA-25 C
Load
25 (kg) FDA4 Load (kg) FDA5
3600 3500 A
3300 4125
SCB 0
3000 0 5 10 FDA4-3000
15 20 3750 FDA5-3500
2700 Deflection (mm) 3375
2400 3000 B
FDA1 Load
2100 (kg) FDA4-2000 FDA2 2625 øD
1800 FDA5-2500
1800 2250
0
1500 -140
FDA4
1875 0
FDA2-1500 -175
FDA5
5 1500
-6 1200
-1000
1500
2 50
60 FDA4 5 - 1
FDA
900 00 000
FDA -8
4 1125
FDA5-1
1200
600 FDA4-600 750 F
FDA2-1000 E
300 375 FDA5-750
900
0 0
0 700
0 3 6 9 12 15 18 21 DA2- 27
F24 30 0 3 6 9 12 15 18 21 24 27 30
0 -500(mm)
600 FDA2
Deflection Deflection (mm)
0 00
FDA2-4
0 Load
Type
300
(kg)
A (mm) FDA2-300
B (mm)
FDA3 C D Ø (mm) E (mm) F (mm)
2700
FDA4-600
2475 - 1400 200 124 M16 12 150 170
0 FDA3-2250
36 40 FDA4-2000
2250
0 3- 30008 9 12250 15 18 21 134
24 27 30 M20 14 200 210
2025
n (mm) Deflection (mm)
1800
FDA4 Load
1575
(kg) FDA3-1500 FDA5
3500 A
1350
4125
0
1125 -105
3750 FDA5-3500 FDA3
900 - 7 5 0
2 2.5 3 3375 FDA3
00
tion (mm) 675 FDA3-6
3000
FDA3-450 B
450
2625
225 FDA5-2500
2250
0 øD
4- FDA9
1400 1875 0 3 6 9 12 15 18 21 24 27 750 30
-1
0 1500 FDA5
4-100 Deflection 1250
-(mm)
FDA5
A4-800 1125
A 5 -1 000
FD
A4-600 750
FDA5-750 E
375 C
0
27 30 0 3 6 9 12 15 18 21 24 27 30
Errors and Omissions Excepted (E&OE).
27 30
ction (mm)
50
3-10
A3-7 5 0 Web: www.iac-acoustics.com
A3-600
A3-450
72 Email: avm@iac-acoustics.com 72
SC
200 200 B
SC
B
900
60
600 0 1200
B5
-6
150 150 600
SC
FDA1-500 SC
B
Multiple Open Spring Mounts FDA6 & FDA9
300
50
100 100
450 900
5 0
B4 -350
SC
80
FDA1
80 SC 0 3
B
45
70
-250
60 60
300 FDA1 600
50 50 D A 1 -2 00
F
Product Description Elastical characteristics 5
FDA1-150 Load (kg)
SC
40 40 B2
B
150 SC 300
25
2700
30 30
0
The 25
FDA6 and FDA9 ranges are designed for the suspension of 25 For: FDA 6-900 – 6-1200 andB 2 FDA 9-1350 – 9-3150, vertical natural2475
SC
0 SC 0
B
machines operating at more than 350 RPM, for loads ranging from 450 20 frequency
4 is from 2.9Hz.
20
20 2250
0 8 12 16 20 24 28 32 36 40 0 3
to 6750kg.
15 15 For: FDA 6-3000, 6-4500, 9-4500 and 9-6750 vertical natural frequency
2025
Deflection (mm)
4 5 is from 3.7Hz 1800
Components
10 Load
10 (kg) FDA4 1575Load (kg)
3600 3500
3300
Applications 1350
4125
SCB LoadSteel
• (kg) spring SCB 3000 FDA4-3000 1125
3750
1000
• Rubber
10 insert
15 20 30 40 50 60 75 2700
Especially for0.2machines running
0.5 at low RPM’s
1 such
1.5 as2gensets,
2.5 3
900
3375
800
• 700 Painted steel mounting plate 675
Natural Frequency (Hz) 2400compressors, fans, pumps and refrigerating units etc. (mm)
Deflection 3000
600 450
500 2100 FDA4-2000 2625
225
400 1800 2250
0
Load
300 (kg)
B9
5 FDA6 Load
1500 (kg)
FDA4
FDA9
-140
0
1875
0 3
5400
250 SC 65 8100
1200
A
-1000
1500
0-
4950
200 B6 7425 FDA4
SC 900 00
FDA4-8
1125
FDA6-4500 FDA9-6750
4500
150 50
B
6750
600 FDA4-600 750
SC B
4050 6075
300 375
100
3600 5400
5 0 0
80 B4
3150 SC 47250 3 6 9 12 15 18 21 24 27 30 0 3
70 FDA6-3000 FDA9-4500
60
2700 4050 Deflection (mm)
50
øD
0
-315
2250
40 B2
5
FDA6
-210
0 3375
Load (kg) FDA9FDA3
SC
-15 0 -22 0
1800 0 2700
2700 5
30 FDA6 FDA9
1350 0 200 1950 E -1 800
25 B2 FDA6-1 2475 FDA9
SC
900 1350
2250 FDA3-2250
20
450 FDA6-900 675 FDA9-1350
2025 C
15
0 18000
0 3 6 9 12 15 18 21 24 27 30 0 3 6 9 12 15 18 21 24 27 30
10 1575 FDA3-1500
Deflection (mm) Deflection (mm)
1350
0
1125 -105
Type A (mm) B (mm) C (mm) D Ø (mm) FDAE3 (mm)
900 7 5 0
75 FDA3-
FDA6-900 - 21000.2 0.5
280 1 1.5 2 2.5 3
124 150 16 24800
Deflection (mm) 675 FDA3-6
uency (Hz) A 3- 450
FDA6-3000 & 4500 350 134 450 200 18 FD 300
225
0
FDA6 Load (kg) FDA9 0 3 6 9 12 15 18 21 24 27 30
8100
Deflection
øD (mm)
7425
6750 FDA9-6750 A
6075
5400
4725 B
FDA9-4500
4050
0
-210
0 3375 -315
FDA6 FDA9
6 - 1 5 00 2700
-2250
FDA FDA9
200 1950 800
FDA6-1 FDA9-1
1350 E
FDA6-900 FDA9-1350
675 C
0
27 30 0 3 6 9 12 15 18 21 24 27 30
Errors and Omissions Excepted (E&OE).
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 73
Shop: View our online shop for AVMs
www.iac-acoustics.com
Product Description
When installing a diesel engine generator set, or other rotating 1-2. Housing Materials — Ductile cast iron is standard on non seismic
equipment, it is important to reduce vibration and structure single spring isolators. Cold rolled steel plate is used for all other
borne noise to the building in which the engine is located. When spring isolators. 3” 3”
designing an isolation system for a generator set some of the factors 3. Springs — Oil tempered chrome silicon steel is used on the
to consider include: standard springs.
Recommended Bolt Size ½”
4. Internal Dampening — All IAC AcousticsSAE Grade 8 SM isolators incorporate
7 7
• Mass of equipment internal neoprene side dampening. This dampening limits the
• Mass of floor machine vibration while the2 engine
3
passes through the start-up 2
3
• Stiffness of floor resonant frequency.
• Vibratory force produced by equipment 5. IAC Acoustics Sound Pad 4— To provide a non-skid surface and 4
to
6
• Frequency of rotating equipment increase isolation efficiency, the IAC Acoustics Sound Pad is installed 1
1
• Natural frequency of isolators on all SM and SMD isolators. 5 5
• Natural frequency of floor 6. Side Snubber — Side snubber is standard on the SMD and SMD2
6” 6”
non seismic models.7 ½” 7 ½”
Spring Interchangeability 7. Level Adjusting Bolt — All IAC Acoustics SM and SMD isolators
SM isolators are designed to accommodate all of the different rated have an external adjustment that is long enough to accommodate a
springs. This means you can change springs without changing other 50mm (2”) base channel.
parts of the isolator, such as housings.
Installation Instructions
1. Position isolator on a level surface under equipment leg
2. Loosen adjustable snubbers to allow full deflection (Model SMD)
3. Insert mounting bolt through equipment rail and screw down into
the isolator. About 6-7 turns.
4. Tighten lock nut securely to equipment leg.
Single Spring Isolator Max Load Double Spring Isolator Max Load
Spring Deflection Deflection Deflection Deflection
Colour Without Side at Rated With Side
at Rated (kg) (lbs)
Without Side
at Rated
With Side
at Rated (kg) (lbs)
Snubber Snubber Snubber Snubber
Load Load Load Load
Blue SM-150 25mm / 1” SMD-150 25mm / 1” 68 150 SM2-300 25mm / 1” SMD2-300 25mm / 1” 136 300
Grey SM-250 25mm / 1” SMD-250 25mm / 1” 113 250 SM2-500 25mm / 1” SMD2-500 25mm / 1” 227 500
Pink SM-450 25mm / 1” SMD-450 25mm / 1” 204 450 SM2-900 25mm / 1” SMD2-900 25mm / 1” 408 900
Black SM-550 25mm / 1” SMD-550 25mm / 1” 249 550 SM2-1100 25mm / 1” SMD2-1100 25mm / 1” 499 1100
White SM-750 25mm / 1” SMD-750 25mm / 1” 340 750 SM2-1500 25mm / 1” SMD2-1500 25mm / 1” 680 1500
Brown SM-1050 25mm / 1” SMD-1050 25mm / 1” 476 1050 SM2-2100 25mm / 1” SMD2-2100 25mm / 1” 953 2100
Orange SM-1250 25mm / 1” SMD-1250 25mm / 1” 567 1250 SM2-2500 25mm / 1” SMD2-2500 25mm / 1” 1134 2500
Errors and Omissions Excepted (E&OE).
Green SM-1450 25mm / 1” SMD-1450 25mm / 1” 658 1450 SM2-2900 25mm / 1” SMD2-2900 25mm / 1” 1315 2900
Yellow SM-1800 25mm / 1” SMD-1800 25mm / 1” 816 1800 SM2-3600 25mm / 1” SMD2-3600 25mm / 1” 1633 3600
Beige SM-2200 25mm / 1” SMD-2200 25mm / 1” 998 2200 SM2-4400 25mm / 1” SMD2-4400 25mm / 1” 1996 4400
Red SM-2500 25mm / 1” SMD-2500 25mm / 1” 1134 2500 SM2-5000 25mm / 1” SMD2-5000 25mm / 1” 2268 5000
Navy SM-3000 25mm / 1” SMD-3000 25mm / 1” 1361 3000 SM2-6000 25mm / 1” SMD2-6000 25mm / 1” 2722 6000
Web: www.iac-acoustics.com
74 Email: avm@iac-acoustics.com 74
SM SMD
3” 3”
2 2
3 3
4 4
6
1
1
5 5
6” 6”
7 ½” 7 ½”
SM2 SMD2
4” 4”
7 7
2 2
3 3
4 4
1
Errors and Omissions Excepted (E&OE).
7” 7”
5
5 1
6
¼” ¼”
9¾” 9¾”
11 ½” 11 ½”
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 75
Shop: View our online shop for AVMs
www.iac-acoustics.com
1” 10”
6”
¾”
Bolt 1 ¾”
1 4
Errors and Omissions Excepted (E&OE).
2 Bolt
4 2
2
1½
Max. 7 ½” 1 ½”
Allowable Uncompressed Max. 7 ½”
Compression Free Height Allowable Uncompressed
Compression Free Height
3
3 3
Web: www.iac-acoustics.com
76 Email: avm@iac-acoustics.com 76
Product Description
Applications
Model L C W ØD H*
S S2
(mm) (mm) (mm) (mm) (mm)
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 77
Shop: View our online shop for AVMs
www.iac-acoustics.com
Product Description
Applications
Web: www.iac-acoustics.com
78 Email: avm@iac-acoustics.com 78
Product Description
Applications
VRA4-1000 ~
331 184 150 265 110 110 268 Ø18 M14 M27x80
VRA4-6000
* unloaded height
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 79
Shop: View our online shop for AVMs
www.iac-acoustics.com
Product Description
They are composed of a lower body and upper cover each with
a rubber facing mat. The two-part connecting guide pillars join
the upper cover and lower body together. the design is capable of
withstanding the horizontal forces from seismic events. The rubber
mat on the base and top plates aid in isolating against higher
frequencies and also have anti-skid properties. Use the below tables
to choose the correct mount according to the application and plant
loadings.
S
S
Load Deflection Vertical Stiffness Vertical Stiffness
Model Load (kg)
(lb) (mm) (kg/mm) (lbs/in)
SSM-50 50 110 2.00 112
HH
SSM-60 60 132 2.40 134
SSM-70 70 154 2.80 157
SSM-80 80 176 3.20 179
SSM-100 100 220 4.00 224
SSM-120 120 265 4.80 269 øD
øD
SSM-140 140 309 5.60 314
WW
SSM-160 160 353 6.40 358
25
SSM-180 180 397 7.20 403 C2
(1”) C2
SSM-200 200 441 8.00 448 C1
C1
SSM-230 230 507 9.20 515 L
L
SSM-250 250 551 10.00 560
SSM-300 300 661 12.00 672
SSM-360 360 794 14.40 806 S
* unloaded height
C2
C1
L
Web: www.iac-acoustics.com
80 Email: avm@iac-acoustics.com 80
Product Description
Applications
W
W
SSM2-460 400 882 18.40 1030
SSM2-500* 500 1102 25 20.00 1120
SSM2-560 560 1235 (1”) 22.40 1254
C2
C2
SSM2-660 660 1455 26.40 1478
C1
C1
SSM2-720* 720 1587 28.80 1613
LL
SSM2-800 800 1764 32.00 1792
SSM2-900 900 1984 36.00 2016
SSM2-1000 1000 2205 40.00 2240
S
SSM2-1200 1200 2646 48.00 2688
SSM2-1400 1400 3086 56.00 3136
* stocked items
H
Outer Size(±2mm)
Model L C1 C2 W ØD H*
S
(mm) (mm) (mm) (mm) (mm) (mm)
Errors and Omissions Excepted (E&OE).
C2
C1
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 81
Shop: View our online shop for AVMs
www.iac-acoustics.com
Product Description
Applications
Mounting
This mount is fixed between the wall and the apparatus, as it is shown
in the figure to the right. The axial direction of the vibration mount
should pass through the centre of gravity of the apparatus. The degree
of resilience of the mount, and therefore the natural frequency, can be
regulated as V1 and V2 can be adjusted. 20 50 B
Type D1 H P Max. B
(mm) (mm) (kg)
D1
4 20 15 15 25
5 20 20 20 25
6 25 20 25 25
6a 30 25 32 25
7a 30 30 40 25
Errors and Omissions Excepted (E&OE).
Web: www.iac-acoustics.com
82 Email: avm@iac-acoustics.com 82
VTOE is used as the upper support when hanging electrical cabinets Dimensions A D E G H K N t
and other similar equipment on walls or from the ceiling. The VTN is VTOE Upper 96 9 75 M8 33 114 15 1.5
used as the lower support for wall mounting and is not a captive type VTN Lower 96 9 75 M8 33 114 15 1.5
mount.
VTOE VTN
M M
G
G
K
K
A
F A F
N N
t t
D D
H H
E E
Example
VTOE VTOE
VTOE
VTN
Errors and Omissions Excepted (E&OE).
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 83
Shop: View our online shop for AVMs
www.iac-acoustics.com
Product Description
Spring isolator for vibration isolation of suspended equipment and
installations.
Applications
The ceiling suspender is used for sound insulation in connection with
hanging plain plasterboard ceilings.
Damping
Field measurements show that the sound insulated ceilings improve
the sound insulation of the floor, horizontal division by up to 10 dB. Quantities
Approx.: 1.1 ceiling hangers per m2 ceiling with 2 layers of
The apparent sound reduction index R’w is typically 58-60dB, but plasterboard (~load: approx. 23kg/hanger).
depends on the construction of the existing ceiling.
Approx.: 1.5 ceiling hangers per m2 ceiling with 3 layers of
A sound insulated staggered wall reduces the air-transmitted noise by plasterboard (~load: approx. 23kg/hanger).
approximately 8-12 dB, depending on the construction of the existing
wall. Approx.: 3.6 wall mounts per meter wall length (height of ceiling 2.2 -
2.7m)
Advantages
• The ceiling suspender and wall mount provide optimal insulation Note
against airborne noise Dimension X can be any length from 65 - 1200mm
• Fire resistant construction. Lagging class 1 (DS 1065.2)
• Easy to fit and capable of accommodating unevenness in existing
ceilings or walls
Mounting
The acoustic ceiling has to hang free without
direct coupling to other walls and pipes etc.
Ø
6.
4
penetrations.
X
delivered unassembled.
Web: www.iac-acoustics.com
84 Email: avm@iac-acoustics.com 84
Product Description
Materials
Chromated steel and rubber.
Dimensions
Steel thickness: 1.5mm
Total Width: 45mm
Total Length: 115mm
Recommended Loading
Ø
Ø
9
9
35
Static load: 2-60kg
86 118
43
60
CH2-60 60 CH2-60
50 50
40 40
30 CH2-30 30
CH2-30
CH2-20 CH2-20
20 20
CH2-10 CH2-10
10 10
0 0
0 10 20 30 0 2 4 6
Deflection (mm) Natural Frequency (Hz)
Errors and Omissions Excepted (E&OE).
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 85
Shop: View our online shop for AVMs
www.iac-acoustics.com
Product Description
Applications
H
20~25
HHD-120 120 264 4.8 269
(1”)
HHD-140 140 308 5.6 314
HHD-160 160 352 6.4 358
HHD-180 180 396 7.2 403
HHD-200 200 440 8 448
HHD-230 230 507 9.2 515 bolt S2
HHD-250 250 551 10.0 560
HHD-300 300 661 12.0 672
HHD-330 330 727 13.2 739
HHD-360 360 793 14.4 806
W
Outer Size(±2mm)
Model L W H
S S2 L
(mm) (mm) (mm)
Errors and Omissions Excepted (E&OE).
Web: www.iac-acoustics.com
86 Email: avm@iac-acoustics.com 86
Product Description
The CH1 range is designed for suspension of false acoustic ceilings and
machinery operating at more than 450 RPM. (7.5Hz) for loads ranging
from 25–350kg.
Components
The spring rests on a rubber sleeve to avoid contact between the steel
frame and the threaded rod.
Elastical Characteristics
Installation Instructions
Remove the spring and rubber sleeve and you are ready to fasten the
mount in the ceiling.
Replace the rubber sleeve, spring and spring cap.
Thread the drop-rod through the spring and bolt in place.
A
Load (kg) CH1 C
800
CH1-750
700
600
M
CH1-500
500
H
400 CH1-350
300
CH1-250
200
CH1-150
0
CH1-10
100
CH1-75
CH1-50
CH1-25
0 E
5 10 15 20 25 30 35
Deflection (mm) øB
A H B C E
Type M
mm mm Ø mm Ø mm mm
CH1-25 75 120 30 12 50 M8
CH1-50 75 120 30 12 50 M8
CH1-75 75 120 30 12 50 M8
CH1-100 75 120 30 12 50 M8
Errors and Omissions Excepted (E&OE).
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 87
Shop: View our online shop for AVMs
www.iac-acoustics.com
Product Description
RG8 ribbed pad is composed of a neoprene rubber, which has good oil
/ fuel resistance and is anti static with a hardness of 50 Sh.
The plate has ribs running lengthwise on one side and crosswise on
the other.
Applications
The RG8 pad is mainly used for the insulation of vibration in the
40-50 Hz and higher range.
Specification
Load (kg/cm2)
4
RG 8
The area of pad required is determined by the load. The normal static
load is 3.5 kg/cm² where the deflection obtained is 1.2mm.
3
The RG8 pad can withstand a maximum load of 4.3 kg/cm² for a
shorter period of time
1
Fitting
The RG8 pad can normally be fitted between the machine and the 0
0 0.5 1.0 1.5
underlying base. The rubber pad in many cases removes the need for
Deflection (mm)
bolting and thereby avoiding bolt holes in the floor or building.
If more than one layer is used, then a 1-2mm steel plate must be used
between each layer to ensure a steady foundation.
The panel is best cut with a damp, sharp knife. If the cut piece of
plate is 5-10 mm larger than the machine foot it will increase the
adhesiveness of the rubber to the floor.
Dimensions
Pads are available in standard sizes of 500 x 500 x 8mm
Errors and Omissions Excepted (E&OE).
Web: www.iac-acoustics.com
88 Email: avm@iac-acoustics.com 88
Product Description
The solid Mafund plate is 15mm thick (MF15) and is best used where
there is a very high load of up to 54 kg/cm2 and is made from natural
rubber.
The hollow Mafund plate 25mm thick (MF25) gives a relatively high
deflection. The plate can hold a load of up to 5 kg/cm2 and is made of
SBR rubber.
Applications
The Mafund plate is used for the vibration insulation of larger and It is possible with both types of panel to obtain higher degrees of
heavy machinery, typically under a concrete base. The plates can also deflection by layering panels on top of each other. For example look at
be used in buildings for noise and vibration insulation between layers curves for MF50, which are 2 layers of MF25.
of concrete.
Dimensions
Specifications MF15: 500 x 250 x 15mm (Mafund solid)
The area of panels required is determined by the load. The normal MF25: 500 x 250 x 25mm (Mafund hollow)
static load distribution for a hole MF25 plate (50 x 25 cm) is 5 kg/cm2, MF50: 500 x 250 x 50mm (Mafund hollow)
which gives a deflection of 2.7 mm.
Load kg/cm2
50x25 50x25
50 50
40 40
25x25 25x25
30 30
20 25x12.5 20 25x12.5
12,5x12.5 12.5x12.5
10 10
0 0
0 0.5 1 1.5 2 10 20 30 40 50 60 70
Deflection mm Frequency, Hz
Load kg/cm2
50x25 50x25
5 5
25x25 25x25
4 25x12.5 4 25x12.5
12.5x12.5 12.5x12.5
3 3
2 2
1 1
0 0
0 0.5 1 1.5 2 2.5 3 3.5 10 15 20 25 30 35 40
Deflection mm Frequency, Hz
50x25 50x25
3 3
Errors and Omissions Excepted (E&OE).
25x25 25x25
2.5 2.5
5
12. 25
2 25x 2 x1
2.
5
1.5 1.5
12.5x12.5 12.5x12.5
1 1
0.5 0.5
0 0
0 1 2 3 4 5 6 10 15 20 25
Deflection mm Frequency, Hz
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 89
Shop: View our online shop for AVMs
www.iac-acoustics.com
Denmark
T: +45 36 77 88 00
F: +45 36 78 12 30
E: nordic@iac-acoustics.com
France
T: +33 (0) 3 20 05 88 88
F: +33 (0) 3 20 05 88 99
E: france@iac-acoustics.com
Germany
T: +49 (0) 2163 9991 0
F: +49 (0) 2163 9991 23
E: deutschland@iac-acoustics.com
Italy
T: +39 02 48 44 22 1
F: +39 02 48 44 22 22
E: italia@iac-acoustics.com
Web: www.iac-acoustics.com
90 Email: avm@iac-acoustics.com 90
Web: www.iac-acoustics.com
Email: avm@iac-acoustics.com 91
Shop: View our online shop for AVMs
www.iac-acoustics.com
While every effort has been made to ensure the accuracy of information contained in this document, the content is subject to change and we
cannot guarantee its accuracy or currency. We reserve the right to make changes to the information without notice. We do not give any warranty
as to the ownership of the copyright of any material forming part of this document and do not accept any liability for any direct, indirect,
incidental or consequential losses arising from the infringement of any third party rights in relation to any material contained herein.
www.iac-acoustics.com
92