Molecular Sieve Five ångström 5A Molecular Sieve Chemical formula: 0.7CaO•0.30Na2O•Al2O3•2.0SiO2 •4.5H2O
Silica-alumina ratio: SiO2/ Al2O3≈2
Five ångström (5Å) molecular sieves are often utilized in the petroleum industry, especially for the purification of gas streams and in the chemistry laboratory for separating compounds and drying reaction starting materials. They contain tiny pores of a precise and uniform size, and are mainly used as an adsorbent for gases and liquids. Five ångström molecular sieves are used to dry natural gas, along with performing desulfurization and decarbonation of the gas. They can also be used to separate mixtures of oxygen, nitrogen and hydrogen, and oil-wax n- hydrocarbons from branched and polycyclic hydrocarbons. Five ångström molecular sieves are stored at room temperature, with a relative humidity less than 90% in cardboard barrels or carton packaging. The molecular sieves should not be directly exposed to the air and water, acids and alkalis should be avoided. Selecting molecular sieves Molecular sieves are available in different shape and sizes. But the spherical beads have advantage over other shapes as they offer lower pressure drop, are attrition resistant as they do not have any sharp edges, and have good strength, i.e. crush force required per unit area is higher. Certain beaded molecular sieves offer lower heat capacity thus lower energy requirements during regeneration. The other advantage of using beaded molecular sieves is bulk density is usually higher than other shape, thus for same adsorption requirement molecular sieve volume required is less. Thus while doing de-bottlenecking you may use beaded molecular sieves, load more adsorbent in same volume, and avoid any vessel modifications.
Technical Specification of 5A Type Molecular Sieve
Model 5A Color Light gray Nominal pore 5 angstroms diameter Shape Sphere Pellet Diameter 1.7-2.5 3.0-5.0 1.6 3.2 (mm) Size ratio up to ≥98 ≥98 ≥96 ≥96 grade (%) Bulk density ≥0.72 ≥0.70 ≥0.66 ≥0.66 (g/ml) Wear ratio ≤0.20 ≤0.20 ≤0.20 ≤0.20 (%) Crushing ≥45/piec ≥100/piec strength ≥40/piece ≥75/piece e e (N) Static H2O ≥22 ≥22 ≥22 ≥22 adsorption (%) Water content ≤1.0 ≤1.0 ≤1.0 ≤1.0 (%) Typical 0.7CaO . 0.3Na2O . Al2O3 . 2SiO2 . 4.5H2O chemical SiO2: Al2O3≈2 formula Typical a) The strong ionic forces of the divalent applicatio calcium ion makes it an excellent adsorbent to n remove water, CO2, H2S from sour natural gas streams, while mini missing COS formation. Light mercaptans are also adsorbed. b) Separation of normal- and iso paraffin’s. c) Production of high purity N2, O2, H2and inert gases from mixed gasstreams d) Static, (non-regenerative) dehydration of insulating glass units, whether air filled or gas- filled. Package Carton box; Carton drum; Steel drum MOQ 1 Metric Ton Payment T/T; L/C; PayPal; West Union terms a) By national standard GB_13550-1992 Warranty b) Offer lifetime consultation on problems occurred Container 20GP 40GP Sample order Quantity 12MT 24MT < 5kg Delivery 3 days 5 days Stock available time
Regeneration of 5A Type Molecular Sieve
Molecular sieve Type 5A can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes. To remove moisture from a 5A molecular sieve, a temperature of 250-300°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C, or mercaptan or CO2 levels below 2 ppm. The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process Size 5A - Zeolites are available in beads of 1-2 mm(10x18 mesh), 2-3 mm(8x12 mesh), 2.5-5 mm(4x8 mesh) and as powder, and in pellet 1.6mm, 3.2mm. Attention To avoid damp and pre-adsorption of organic before running, or must to be reactivated.