This document amends an Indian standard specification for chequered cement concrete tiles. It replaces an existing clause defining chequered tiles to specify they are cement tiles with grooves making them anti-slip, where the grooved area is at least 2% of the total surface and grooves are at least 3mm deep. The amendment was made in June 2003.
This document amends an Indian standard specification for chequered cement concrete tiles. It replaces an existing clause defining chequered tiles to specify they are cement tiles with grooves making them anti-slip, where the grooved area is at least 2% of the total surface and grooves are at least 3mm deep. The amendment was made in June 2003.
This document amends an Indian standard specification for chequered cement concrete tiles. It replaces an existing clause defining chequered tiles to specify they are cement tiles with grooves making them anti-slip, where the grooved area is at least 2% of the total surface and grooves are at least 3mm deep. The amendment was made in June 2003.
Free Standard provided by BIS via BSB Edge Private Limited to Soma Raviteja -
Nellore(raviteja036@gmail.com) 27.59.218.48 [for non-commercial use only].
AMENDMENT NO.4 JUNE 2003
TO IS 13801: 1993 CHEQUERED CEMENT CONCRETE TILES - SPECIFICATION ( Page 1, clause 3.1) - Substitute the following for the existing clause: '3.1 Cbequered TUes Chequered tiles.. cement tiles or terrazo tiles having grooves on the surface of the tile making it anti-slippery. The area of chequered grooves should not be less than 2 percent of the total surface area of the tile. The chequered groove can be in any shape and length, but the depth of grooves should not be less than 3 mm.'