Professional Documents
Culture Documents
Headend Optics Platform
GX2‐RSW1000B
RF Switch
FEATURES
• Automatic switching mode using internal RF power detectors
to measure input signals
• Revert and non‐revert modes for automatic switching
• Front panel test point for RF output
• High density—up to 16 modules in 4RU chassis
• Plug and play application modules with blind mate RF
connectors in the rear
PRODUCT OVERVIEW
The OmniStar® GX2‐RSW1000B provides switching redundancy for forward or return path RF signals to increase the reliability of
voice, video, and data transmission. With internal RF detection and adjustable thresholds on both inputs, the module can
automatically switch to the secondary input when the signals on the primary input fall below an acceptable level. For bursty traffic,
typically seen in return path applications, the module can automatically switch using the control signals from any OmniStar GX2
receiver. You can also manually switch between the primary input and the secondary input through one of the three communication
interfaces available with the OmniStar GX2 platform.
The compact, energy‐efficient design allows 16 plug and play modules to operate in the four rack‐unit OmniStar GX2 housing,
minimizing valuable headend space. The hot‐swappable modules, with unique embedded features like Quick‐Swap module
configuration, maximize in‐service time by eliminating the need for manual configuration.
Ask us about the complete Access Technologies Solutions portfolio: Headend Optics‐GX2
SPECIFICATIONS
RF
RF Bandwidth 5 MHz to 1000 MHz
Insertion Loss (All Ports) 4.0 dB maximum
17.0 dB minimum, 10 – 870 MHz
Return Loss (All Ports)
15.0 dB minimum, 870 – 1000 MHz
Isolation 65 dB typical
RF Test Point –20 dB relative to RF output port
General
Weight 2.0 lbs. (1 kg)
Mounting GX2‐HSG* Equipment Shelf
RF Connector Types
Input/Output F‐type (using G‐to‐F adaptor on chassis)
Test Point F‐type
Power Consumption 2 Watts, maximum
Visual Interface Tri‐Colored Module Status LED
Data/Control Interface Serial Peripheral Interface (SPI) to Control Module
Ordering Information
Model Name Description
GX2‐RSW1000B RF Switch
RELATED PRODUCTS
GX2 Chassis Optical Patch Cords
Jumpers Optical Passives
Power Supplies Installation Services
Note: Specifications are subject to change without notice.
• International: +1‐678‐473‐5656 are all registered trademarks of ARRIS Enterprises, Inc. Other trademarks and trade names may be used in
this document to refer to either the entities claiming the marks and the names of their products. ARRIS
disclaims proprietary interest in the marks and names of others. The capabilities, system requirements
and/or compatibility with third‐party products described herein are subject to change without notice.
Ask us about the complete Access Technologies Solutions portfolio: Headend Optics‐GX2