Professional Documents
Culture Documents
int gi0/0/0
ip nat outside
ip nat inside
ip nat inside
ip nat inside
Your default static route is fine and you don't need to change it.
>>
This is fine.
You need also to associate one L2 access interface to vlan 100 to be able to use
SVI vlan 100.
To be noted also the ISP assigned is a private IP address and the ISP will perform
NAT on its device too.
(unless you changed your public IP to this 192.168.1.1 for security reasons).
NAT is triggered when a packet needs to go from a NAT inside interface to a NAT
outside interface.
Inter Vlan routing should still work correctly because all SVIs are configured with
ip nat inside.
Hope to help
Giuseppe