Professional Documents
Culture Documents
LAG-IT ™
Multi-Purpose Adhesive/Coating
Premium Quality
• Duct liner edge treatment • LEED® Compliant for VOC Content
• Duct liner adhesive • Water, UV and mold resistant
• Encapsulates fibers • Manufactured by S.M.W.I.A. local 12
• Repair liner tears • UL Classified
• Heavy-duty water-based formula
LAG-IT™ Multi-Purpose
Adhesive/Coating
DESCRIPTION T E C H N I C A L I N F O R M AT I O N
LAG-IT is a heavy-duty water based adhesive/coating available in both BASE: Synthetic polymer
black and white. Formulated with EPA Registered preservatives which
prevent the growth of mold, mildew, fungus, bacteria, and yeast. COLOR: White and Black (gray dries black)
WEIGHT/GAL: 10.8 ± .5 lbs. per gallon
SOLIDS: 53 ± 2%
BASIC USE VISCOSITY: 75,000 cPs
LAG-IT is used for encapsulating fibers exposed on edges or tears of duct SERVICE TEMPERATURE:
liner. It can also be used to bond open-cell duct liner (fiberglass, polyester) -25°F to +175°F
and rigid duct board to metal. LAG-IT can also be used to bond and seal APPLICATION TEMPERATURE:
jackets of canvas, cloth or other fabrics/insulators to air-conditioning ducts 40°F to 90°F
and cold water pipes.
LAG-IT can be applied via brush, roller and commercial-grade airless STORAGE TEMPERATURE:
paint-sprayers. 40°F to 90°F
FLASH POINT: No flash to boil
DRY TIME: 3 Hours (ASTM C679)
Depending on temperature,
A P P L I C AT I O N humidity, and thickness.
Apply to clean edges or tears of duct liner insulation using brush or roller. FREEZE THAW: 5 Cycles
Apply to metal, cloth or duct board surfaces using a brush, roller, trowel or COVERAGE: 200 sq.ft.
airless sprayer. Apply per industry standards. Uncured adhesive can be removed Depending on application rate.
with water.
SHELF LIFE: 1 Years
USC - Classification
Adhesives
52XF
SPECIAL CHARACTERISTICS SURFACE BURNING CHARACTERISTICS
Applied to Inorganic Reinforced Cement Board +
FLAME SPREAD 0
• Duct liner edge treatment • Crack and peel resistant SMOKE DEVELOPED 0
• Duct liner adhesive • Low odor + - Tested as applied in two 2 in. wide strips 8 in. on center
covering 16 percent of the test sample area at a coverage rate of
• Encapsulates fibers • Excellent workability 200 sq. ft. per gallon
• Repair liner tears • High strength and durability CNC - Classification
• Heavy-duty water-based formula • Non-Flammable in wet state Adhesives
52XF
• LEED® Compliant for VOC • Exceptional coverage SURFACE BURNING CHARACTERISTICS
Content • Sag resistant Applied to Inorganic Reinforced Cement Board +
• Water and UV resistant • Will not discolor over time FLAME SPREAD 0
SMOKE DEVELOPED 0
• Manufactured by S.M.W.I.A. • UL Classified + - Tested as applied in two 50 mm wide strips spaced 200 mm
local 12 on center (covering 22.6% of the exposed sample area) at a
coverage rate of 5 m2/L.
Distributed By:
®
Charleroi, PA Lodi, CA
210 Fifth Street 810 S. Cluff Avenue Ductmate is a proud member of the following organizations:
Charleroi, PA 15022 Lodi, CA 95240-9141 This spec data is printed on paper that meets
724-258-0500 209-333-4680 the Certified Fiber Sourcing requirements of the
FAX: 724-258-5494 FAX: 209-333-4678 SFI program and contains 10% recycled content
1-800-245-3188 • www.ductmate.com © Copyright Ductmate Industries, Inc. All rights reserved. 219 - 07/15