Professional Documents
Culture Documents
Website http://biz.lgservice.com
SERVICE MANUAL
DVD RECEIVER SYSTEM
SERVICE MANUAL
Copyright © 2008 LG Electronics. Inc. All right reserved. 1-1 LGE Internal Use Only
Only for training and service purposes
SECTION 1. GENERAL
❏ SERVICING PRECAUTIONS
NOTES REGARDING HANDLING OF THE PICK-UP
1. Notes for transport and storage
1) The pick-up should always be left in its conductive bag until immediately prior to use.
2) The pick-up should never be subjected to external pressure or impact.
2. Repair notes
1) The pick-up incorporates a strong magnet, and so should never be brought close to magnetic materials.
2) The pick-up should always be handled correctly and carefully, taking care to avoid external pressure and
impact. If it is subjected to strong pressure or impact, the result may be an operational malfunction and/or
damage to the printed-circuit board.
3) Each and every pick-up is already individually adjusted to a high degree of precision, and for that reason
the adjustment point and installation screws should absolutely never be touched.
4) Laser beams may damage the eyes!
Absolutely never permit laser beams to enter the eyes!
Also NEVER switch ON the power to the laser output part (lens, etc.) of the pick-up if it is damaged.
Pressure
Magnet
Pressure
Conductive Sheet
LGE Internal Use Only 1-2 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
NOTES REGARDING COMPACT DISC PLAYER REPAIRS
1. Preparations
1) Compact disc players incorporate a great many ICs as well as the pick-up (laser diode). These components
are sensitive to, and easily affected by, static electricity. If such static electricity is high voltage, components
can be damaged, and for that reason components should be handled with care.
2) The pick-up is composed of many optical components and other high-precision components. Care must be
taken, therefore, to avoid repair or storage where the temperature or humidity is high, where strong magnet-
ism is present, or where there is excessive dust.
2. Notes for repair
1) Before replacing a component part, first disconnect the power supply lead wire from the unit
2) All equipment, measuring instruments and tools must be grounded.
3) The workbench should be covered with a conductive sheet and grounded.
When removing the laser pick-up from its conductive bag, do not place the pick-up on the bag. (This is
because there is the possibility of damage by static electricity.)
4) To prevent AC leakage, the metal part of the soldering iron should be grounded.
5) Workers should be grounded by an armband (1M Ω)
6) Care should be taken not to permit the laser pick-up to come in contact with clothing, in order to prevent sta-
tic electricity changes in the clothing to escape from the armband.
7) The laser beam from the pick-up should NEVER be directly facing the eyes or bare skin.
Armband
Resistor
(1 Mohm)
Resistor
Conductive
(1 Mohm)
Sheet
Copyright © 2008 LG Electronics. Inc. All right reserved. 1-3 LGE Internal Use Only
Only for training and service purposes
❏ ESD PRECAUTIONS
Electrostatically Sensitive Devices (ESD)
Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components
commonly are called Electrostatically Sensitive Devices (ESD). Examples of typical ESD devices are integrated
circuits and some field-effect transistors and semiconductor chip components. The following techniques should
be used to help reduce the incidence of component damage caused by static electricity.
1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off
any electrostatic charge on your body by touching a known earth ground. Alternatively, obtain and wear a
commercially available discharging wrist strap device, which should be removed for potential shock reasons
prior to applying power to the unit under test.
2. After removing an electrical assembly equipped with ESD devices, place the assembly on a conductive surface
such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly.
3. Use only a grounded-tip soldering iron to solder or unsolder ESD devices.
4. Use only an anti-static solder removal device. Some solder removal devices not classified as "anti-static" can
generate electrical charges sufficient to damage ESD devices.
5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ESD
devices.
6. Do not remove a replacement ESD device from its protective package until immediately before you are
ready to install it. (Most replacement ESD devices are packaged with leads electrically shorted together by
conductive foam, aluminum foil or comparable conductive materials).
7. Immediately before removing the protective material from the leads of a replacement ESD device, touch the
protective material to the chassis or circuit assembly into which the device will by installed.
CAUTION : BE SURE NO POWER IS APPLIED TO THE CHASSIS OR CIRCUIT, AND OBSERVE ALL OTHER
SAFETY PRECAUTIONS.
8. Minimize bodily motions when handing unpackaged replacement ESD devices. (Otherwise harmless motion
such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can gener-
ate static electricity sufficient to damage an ESD device).
LGE Internal Use Only 1-4 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
❏ SERVICE INFORMATION FOR EEPROM (DVD PART)
POWER ON
NAME HEX
OPT 1 00
Remote control
OPT 2 00
Pause key-->1-->4-->7-->2 in order. OPT 3 F0
OPT 4 E7
OPT 5 2F
OPT 6 05
Press number 0~9, Press character OPT 7 F8
A~F (1~6 for a while) OPT 8 21
OPT 9 1B
OPT A 00
OPT B 00
Use arrow key ( ) to
OPT C 00
move to appropriate position and
OPT D 00
make changes
OPT E 00
OPT F 00
OPT G 00
Press pause key once
Copyright © 2008 LG Electronics. Inc. All right reserved. 1-5 LGE Internal Use Only
Only for training and service purposes
❏ SERVICE INFORMATION FOR EEPROM (MICOM PART)
POWER ON
NAME HEX
OPT 1 82
FLD ‘OP-0…. OPT 2 7E
OPT 3 80
OPT 4 27
OPT 5 00
Use arrow key ( ) move
to appropriate position and make
changes
LGE Internal Use Only 1-6 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
❏ PROGRAM DOWNLOAD GUIDE
caution) Do not perform any other work such as disconnecting USB device, switching to the Function and turning
off the power while downloading it to the set.
The USB device should be disconnected after completing the download.
Copyright © 2008 LG Electronics. Inc. All right reserved. 1-7 LGE Internal Use Only
Only for training and service purposes
❏ SPECIFICATIONS
GENERAL
Power supply Refer to main label
Power consumption Refer to main label
Net Weight 10.6 kg (unit: 2.7 kg, stand: 7.9 kg)
External dimensions (W x H x D) 380 x 1022 x 331 mm
Operating conditions Temperature 5°C to 35°C, Operation status: Horizontal
Operating humidity 5% to 85%
Laser Semiconductor laser,wavelength 650 nm
Tuner FM
FM Tuning Range 87.5 - 108.0 MHz or 65.0 - 74.0 MHz, 87.5 - 108.0 MHz
FM Intermediate Frequency 10.7 MHz
AMPLIFIER
Stereo mode 155 W + 155 W (4Ω at 1 kHz, THD 10 %)
Surround mode Front 155 W + 155 W (THD 10 %)
(* Depending on the sound mode Center*:155 W
settings and the source, there may
be no sound output.) Surround*:155 W + 155 W(4Ω at 1 kHz, THD 10 %)
Subwoofer*: 225 W (3Ω at 30 Hz, THD 10 %)
SPEAKERS
Front/Rear Speaker Center Speaker Active Subwoofer
SH93TV-S SH93TV-C SH93TV-A
Type 2 Way 3 Speaker 2 Way 3 Speaker 1Way 1Speaker
Impedance 4Ω 4Ω 3Ω
Rated Input Power 155 W 155 W 225 W
Max. Input Power 310 W 310 W 450 W
Net Dimensions (W x H x D) 300 x 1260 x 285 mm 400 x 110 x 95 mm 245 x 415 x 435 mm
Net Weight 6.5 kg 2.3 kg 13.2 kg
LGE Internal Use Only 1-8 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
SECTION 2. ELECTRICAL PART
❏ TROUBLESHOOTING GUIDE
1. Power Supply Circuit
YES
YES
YES
NO
Is power on? Check power supply circuit.
YES
NO
Does initial read work? Check laser circuit.
YES
Check focus circuit.
Check disc.
NO
Does it play? Check tracking servo circuit.
YES
NO
Does it output Check audio circuit.
audio?
YES
OK
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-1 LGE Internal Use Only
Only for training and service purposes
2. Front circuit (1/2)
Power on.
YES
NO NO
Check if CN202 Reconnect it.
Red LED turn off?
and CN2P1 are ok?
YES YES
NO NO
Is the Digitron on Check if the front Refer to SMPS part.
correctly? power is ok?(*1)
YES
YES
NO
Check if all 1
buttons are ok?
YES
NO
Check if the remote 2
control is ok?
YES
NO
Check if Check pattern and resoldering
Front B/D ok.
DIG1(*2) is ok?
*1 : CN2A1 Pins.
*2 : DIG1 Pins.
PIN2 : 5VA, PIN3 : 5V, PIN3 : 5V,
PIN56 : -30 VEE, PIN48 : 5V VDD
LGE Internal Use Only 2-2 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. Front circuit (2/2)
Check if the NO
power part of the Refer to power(SMPS).
front is ok?
YES
NO
Check if CN2A1(Pin1~Pin9)
is ok?
YES
YES
YES
Check if RM2A1 NO
voltage is ok(5V)?
YES
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-3 LGE Internal Use Only
Only for training and service purposes
4. System operation flow
Power on.
Show LOGO.
YES
Tray closed?
NO
YES
SLED at inner
side?
NO
Recieve
OPEN/ CLOSE
Key?
NO
1. Execute Pressed Key & IR Key.
2. System operation routine loop.
Receive YES
NO CLOSE Key?
LGE Internal Use Only 2-4 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. Test & debug flow
Test
YES
Check the NO
AC voltage Power PCBA (110V Check the POWER PART.
or 220V).
YES
YES
Are the DC NO
Voltage outputs OK? (-34V, -32V, ±12V, 3.3V, Check the POWER PART.
5VA, 5V, 14V).
YES
YES
1. Check 27MHz system clock.
Update NO 2. Check system reset circuit.
FLASH successfully? 3. Check FLASH R/W enable signal PRD,
RWR.
4. Check FLASH Memory related circuit.
YES
NO
Replace FLASH.
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-5 LGE Internal Use Only
Only for training and service purposes
A
YES
Power On.
YES
YES
YES
Check connection lines
SDRAM NO between SDRAM(IC502) &
works properly? ES8391 and the SDRAM is
damaged.
YES
YES
Check AV cable
connection to TV set.
Normal
Does NO NO Check the load OPEN &
Tray move inside when it OPEN_SW,
is not at closed CLOSE_SW CLOSE switch.
position? signal?
YES
YES
Normal NO Check the Tray control IO pins
TROPEN & TRCLOSE on ES8391.
signal?
YES
YES
Check AV cable connection
B between main PCBA and
loader. (MECHA)
LGE Internal Use Only 2-6 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
B
YES
Does Motor
the SLED move to inner NO NO Check the connection line of
side when it is at outer Driver DRV_MUTE DRV_MUTE.
position? pin is high?
YES
YES
Motor NO Check the related circuit of
Driver DRV_MUTE SLEGN.
pin is High?
YES
SLED+ and NO
Check the amp circuit on
SLED- output
motor driver.
properly?
YES
Do not put in disc Check the cable connection
and close tray. with MECHA.
YES
YES
YES
Check cable connection with
pick-up head.
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-7 LGE Internal Use Only
Only for training and service purposes
C
YES
YES
Check cable connection
between transistor output and
pick-up head.
NO
Put disc in? Laser off.
YES
YES YES
YES
YES
SPNP
NO Check the spindle control amp
SPNN output
properly? circuit of motor driver.
YES
Check the cable connection
between spindle and main
D
PCB.
LGE Internal Use Only 2-8 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
D
YES
Proper NO
NO Check connections between
Focus on ok? signals on A, B, C,
D of ES8391. ES8391 and pick-up head.
YES
YES
Proper
NO Check the related circuit on
CD-DVDCT signal
on ES8391. ES8391 CD-DVDCT.
YES
Check CD_DVDCT connection
between IP9010 and
ES8391.
Proper
NO NO Check the related circuit on
Track On OK? CD-DVDCT signal
on ES8391. ES8391.
YES YES
Proper
NO Check the TRACK connection
TRACK signal
on ES8391 and motor driver.
on ES8391.
YES
YES
Check cable connection
on pick-up head.
NO
Disc Playback? Check RF signal waveform.
YES
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-9 LGE Internal Use Only
Only for training and service purposes
E
YES
YES
YES
Check the related circuit of
Normal NO PWM.(Check Audio out
PWM IC out?(IC601). Pins 54, 55, 58, 59, 61, 62, 67,
68, 70, 71, 74, 75).
YES
LGE Internal Use Only 2-10 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
6. AMP Protection
YES
YES
Power on.
YES
"PROTECTION" NO
appears continuously on the FLD. OK.
YES
YES
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-11 LGE Internal Use Only
Only for training and service purposes
7. AUDIO µ-COM Circuit(DVD & AMP)
Power On.
YES
Does NO Does
it appear DVD Error NO
Loading appear
at FLD? at FLD?
YES YES
Does Check
no Disc or Time NO NO
power part of Main Refer to SMPS.
appear at FLD? B/D.
YES YES
Check
if DVD an audio Check NO
micom insert is oscillator o Refer to oscillator circuit.
OK. X101.
YES
YES
Check NO
NO Check IC101 reset
Check Power. if IC101 Pin5
waveform.
is high.
YES YES
Check NO
Check DVD Module. if IC101 Pin9,36,59 are Check 5V line.
high(5V).
YES
YES
YES
Replace IC101.
LGE Internal Use Only 2-12 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
❏ DETAILS AND WAVEFORMS ON SYSTEM TEST AND DEBUGGING
1. SYSTEM 27MHz CLOCK,RESET,FLASH R/W SIGNAL
FIG 1-1
IC101
PWR_CTL
2
DVD_RESET
3
MRST#
4
3 2
FIG 1-2
IC501
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-13 LGE Internal Use Only
Only for training and service purposes
2. SDRAM CLOCK
FIG 2-1
OPENSW( OPENSW
6
CLOSESW CLOSESW 6
7
OPEN
7
OPEN
8
8
CLOSE CLOSE
9 9
FIG 3-1 FIG 3-2
LGE Internal Use Only 2-14 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3) Tray open waveform
OPENSW
6 7
6
CLOSESW
7
OPEN
8
CLOSE
FIG 3-3
9
8
SLO
10
DRV_MUTE
11
SLED+
12 10 IC501
SLED-
13
FIG 4-1
11
12
13
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-15 LGE Internal Use Only
Only for training and service purposes
5. LENS CONTROL RELATED SIGNAL (NO DISC CONDITION)
FOO
14
14 IC501
F+
15
F-
16
15
FIG 5-1
16
DVD MDI
17
IC501
DVDLDO501
18
17
CDLDO
19
FIG 6-1
19 18
IC501
LGE Internal Use Only 2-16 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
7. DISC TYPE JUDGEMENT WAVEFORMS
F+ F+
20 1
CD_DVDCT CD_DVDCT
21 2
22
RF RF
3
FIG 7-1 (DVD) FIG 7-2 (DVD)
F+ F+ 1
20
CD_DVDCT CD_DVDCT
21 2
22 RF
RF
3
21
20
22 IC501
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-17 LGE Internal Use Only
Only for training and service purposes
8. FOCUS ON WAVEFORMS
23
CD_DVDCT
23
FOO 24
F+ 25
F-
26
24 IC501
CD_DVDCT
23
25
FOO 24
26
F+
25
F-
26
29 28
SPINO
27
SP-
28
SP+
29
27 IC501
FIG 9-1
LGE Internal Use Only 2-18 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
10. TRACKING CONTROL RELATED SIGNAL (System checking)
CD_DVDCT
30
30
TRO
31
TR-
32
TR+
33
IC501
CD_DVDCT
30
TRO
31 31 IC501
TR-
32
TR+
33
33
32
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-19 LGE Internal Use Only
Only for training and service purposes
11. ES8391 VIDEO OUTPUT WAVEFORMS
34 35
34
IC501
FIG 11-1
2) Y
35
35
34
IC501
FIG 11-2
LGE Internal Use Only 2-20 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
12. AUDIO OUTPUT FROM PWM IC
37
LRCK
38 IC501
FIG 12-1
IC501
IC501
37
38
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-21 LGE Internal Use Only
Only for training and service purposes
13. DVD & AMP WAVEFORMS
1) 2)
3) 4)
5) 6)
4
3
5
6
2
1
LGE Internal Use Only 2-22 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
❏ MAIN PART WIRING DIAGRAM
Touch VFD
Power
Key
Touch Key
6pin FFC Cable 9pin FFC Cable
6pin FFC Cable
HDMI
Slot MD 23pin FFC Cable
MAIN
5pin FFC Cable
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-23 2-24 LGE Internal Use Only
Only for training and service purposes
❏ MAIN PART BLOCK DIAGRAM
VFD SLOT MD
RCU
RCU
TOUCH / LED PCB
EEPROM HDMI IN HDMI OUT
` + -
RF,PUDET,F,E, A,D,C,B,LOAD_SW1/SW2(10)
CD_DVDCT,VC,DVDMDI,CDLDO,DVDLDO(5)
TMDS
TMDS
DDC
MICOM S/W MICOM
DDC
`
ADC
Cypress
Cypress PICK_UP
PICK_UP SILICON ES7108
LOAD-/+,SPIN-/+
DL5FV
DL5FV RX TX
SLED-/+(6)
TKEY_CLK DATA (2 )
DRV_MUTE,SVREF(8)
Video
MOTOR S/W
MOTOR
SLO,SPINO,OPEN,
CLOSE,FOO,TRO,
DRV.
DRV. IC
IC
IP9010
IP9010
SPNN,SPNP(2)
DATA_OUT TOUCH
CLK
CS
Power/LED PCB
SDA,SCL (2)
27MHZ
CLK 12bit
EEPRO
EEPRO DAT I2C
M
M
SERVO I2S
PART
REMOCON DVD RST(1) SDRAM
MICOM DVD_DI_DO_CLK (3)
SDRAM
Sanyo MPEG
MPEG Serial
Serial FLASH
FLASH
ESS8391
ESS8391
64PIN HDMI EEPROM
EEPROM
SPDIF USB
20MHZ
+5V_VDD
USB_N,P (2)
S/W AUDIO VIDEO
+3.3V
+12V
I2S
EXP_CLK ( 1 )
DAC
Converter
CS4361 Ipod_UART
DC-DC
IC
i_Pod
RST IC
OPT_IN
i_Pod
ADC (24pin)
RST
(24pin)
FL,FR,C,SL,SR.LEF
+5V
P_SENS(1)
BUFFER VIDEO
NJM4580
/DAC_RST VIDEO
DRIVER
DRIVER
+14V
LGE Internal Use Only 2-25 2-26 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
❏ MAIN PART CIRCUIT DIAGRAMS
1. MPEG CIRCUIT DIAGRAM
12
11
10
2008.04. 17
A B C D E F G H I J K L M N O P Q R S T
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-27 2-28 LGE Internal Use Only
Only for training and service purposes
2. SERVO INTERFACE CIRCUIT DIAGRAM
12
11
10
2008.04. 17
A B C D E F G H I J K L M N O P Q R S T
LGE Internal Use Only 2-29 2-30 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. INTERFACE CIRCUIT DIAGRAM
12
11
10
2008.04. 17
A B C D E F G H I J K L M N O P Q R S T
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-31 2-32 LGE Internal Use Only
Only for training and service purposes
4. AUDIO MICOM CIRCUIT DIAGRAM
12
11
10
2008.04. 17
A B C D E F G H I J K L M N O P Q R S T
LGE Internal Use Only 2-33 2-34 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. DC-DC CONVERTOR CIRCUIT DIAGRAM
12
11
10
2008.04. 07
A B C D E F G H I J K L M N O P Q R S T
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-35 2-36 LGE Internal Use Only
Only for training and service purposes
6. SYSTEM JACK & IPOD CIRCUIT DIAGRAM
12
11
10
2008.04. 07
A B C D E F G H I J K L M N O P Q R S T
LGE Internal Use Only 2-37 2-38 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
7. HDMI RX & USB CIRCUIT DIAGRAM
12
11
10
2008.04. 07
A B C D E F G H I J K L M N O P Q R S T
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-39 2-40 LGE Internal Use Only
Only for training and service purposes
8. HDMI TX CIRCUIT DIAGRAM
12
11
10
2008.04. 07
A B C D E F G H I J K L M N O P Q R S T
LGE Internal Use Only 2-41 2-42 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
9. MIC (OPTION) CIRCUIT DIAGRAM
12
11
10
2008.04. 07
A B C D E F G H I J K L M N O P Q R S T
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-43 2-44 LGE Internal Use Only
Only for training and service purposes
10. VFD & RCU CIRCUIT DIAGRAM
12
11
10
2008.04. 17
A B C D E F G H I J K L M N O P Q R S T
LGE Internal Use Only 2-45 2-46 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
11. TOUCH KEY CIRCUIT DIAGRAM
12
11
10
2008.04. 07
A B C D E F G H I J K L M N O P Q R S T
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-47 2-48 LGE Internal Use Only
Only for training and service purposes
12. TOUCH POWER CIRCUIT DIAGRAM
12
11
10
2008.04. 07
A B C D E F G H I J K L M N O P Q R S T
LGE Internal Use Only 2-49 2-50 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
❏ MAIN PART CIRCUIT VOLTAGE CHART
MPEG (IC501) QS34XVH245Q3G(IC802)
Names Pin Numbers Voltage Names Pin Numbers Voltage
COREVCC 1.5 16, 48, 79, 124, 185, 188 1.51 V RDVD33 50, 60, 70, 80 3.28 V
VD33_DAC 97, 101 3.47 V HDMI TX (IC805)
VD33_PLL 107 3.47 V Names Pin Numbers Voltage
AVD33 109 3.47 V TDVD33 13, 28, 34, 48, 70 3.23 V
VD33RF 145,163,183 3.43 V TAVD33 23, 38 3.29 V
VD33 1, 14, 30, 46, 62, 77, 95, 119, 133, 186, 203 3.47 V TDVC18 4, 16, 45, 59, 74 1.8 V
SDRAM (IC502) LC87F5R64A (IC101)
Names Pin Numbers Voltage Names Pin Numbers Voltage
VCC33 1, 3, 9, 14, 27, 43, 49 3.47 V 5VA 9, 36, 59 5.04 V
FLASH (IC502) TS5A2053 (IC301,IC810,IC811)
Names Pin Numbers Voltage Names Pin Numbers Voltage
VD33 1, 3, 8 3.47 V VCC50 8 4.87 V
EEPROM (IC504) BH7868FS (IC506)
Names Pin Numbers Voltage Names Pin Numbers Voltage
VD33 8 3.47 V 5V 1, 16 5.22 V
CY8C21434 (IC201) CS4361 (IC302)
Names Pin Numbers Voltage Names Pin Numbers Voltage
5VA 8 3.47 V 5V 15 5.15 V
SERVO (IC401) 3.3V 1 3.41 V
Names Pin Numbers Voltage CS5345 (IC306)
12V 12 12.04 V Names Pin Numbers Voltage
MOTOR_5V 5, 19 4.86 V 3.3V 36 3.28 V
COREVCC 28 1.56 V 5V 5, 14, 30 5.16 V
HDMI RX (IC801) S24A60X51 (IC102)
Names Pin Numbers Voltage Names Pin Numbers Voltage
RAVD33 6, 7, 13, 16, 19, 37, 38, 42, 46, 50, 55, 57, 61, 65, 69, 98, 99 3.28 V 5VA 8 3.42 V
RDVD33 5, 26, 76, 89, 109, 122, 134 3.28 V
RAVC18 22, 94 1.8 V
RDVC18 23, 35, 74, 79, 92, 105, 114, 128, 139 1.8
EEPROM (IC803)
Names Pin Numbers Voltage
EEP_VCC 8 4.32 V
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-51 2-52 LGE Internal Use Only
Only for training and service purposes
❏ MAIN PART PRINTED CIRCUIT DIARGAMS
1-1. MAIN P.C. BOARD DIAGRAM ( TOP VIEW )
EAX43556404
LGE Internal Use Only 2-53 2-54 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
1-2. MAIN P.C. BOARD DIAGRAM ( BOTTOM VIEW )
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-55 2-56 LGE Internal Use Only
Only for training and service purposes
2-1. INTERFACE P.C. BOARD DIAGRAM ( TOP VIEW )
2-2. INTERFACE P.C. BOARD DIAGRAM ( BOTTOM VIEW )
3-1. HDMI/USB P.C. BOARD DIAGRAM ( TOP VIEW ) 3-2. HDMI/USB P.C. BOARD DIAGRAM ( BOTTOM VIEW )
LGE Internal Use Only 2-57 2-58 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
4-1. VFD P.C. BOARD DIAGRAM ( TOP VIEW )
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-59 2-60 LGE Internal Use Only
Only for training and service purposes
5-1. TOUCH KEY P.C. BOARD DIAGRAM ( TOP VIEW ) 5-2. TOUCH KEY P.C. BOARD DIAGRAM ( BOTTOM VIEW )
6-1. TOUCH POWER P.C. BOARD DIAGRAM ( TOP VIEW ) 6-2. TOUCH POWER P.C. BOARD DIAGRAM ( BOTTOM VIEW )
LGE Internal Use Only 2-61 2-62 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
❏ ACTIVE WOOFER PART WIRING DIAGRAM
AMP I/O
AMP
SMPS
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-63 2-64 LGE Internal Use Only
Only for training and service purposes
❏ ACTIVE WOOFER PART BLOCK DIAGRAM
REAR_L/R
DVD_FRONT_L/R
CEN/WF
EXP_CLK
EXP_DAT
TUNER_DI, TUNER_MUTE
PR/R, PB/B, Y/G
FAN
TUNER_CE, TUNER_DO
COMPOSITE
RDS_CLK, RDS_DAT
+5.6V, +16V
FAN_CTL
OPT_IN
ADC
ADC
TUNER_CLK
2. ADC
3. ADC
SCL
2.
3.
SDA
TUNER_L/R
TUNER
12.288MHz
ADATA0(F)
TC7WHU04FU
TC7WHU04FU LRCK, BCK
CS5345
CS5345 OPT_IN
ADATA0(R)
ADATA2(C/W)
MCLK
MOBILE_IN
MOBILE_IN (OPTION)
AMP_PDN
EXPANDER
EXPANDER RESET COMP.
SPK FL+
SPK FL-
AMP_SD/PROTECT PCA9535
PCA9535
Y Pr Pb
TAS
TAS AUX_L/R
Y,Pr,Pb(3)
SPK FR+ 5152
5152 FL+/FL- L R C
PWM/ADC_RST
SPK WF+
TAS
TAS WF+/WF-
R,G,B(3)
SPK WF-
5152
5152
PWM_DAT Composite
PWM_CLK SCARTIN_L/R
PWM Audio IN
PWM
RGB
PS9830
PS9830 RGB_VIDEO, 16:9/4:3, TV_MODE
SPK CEN+ CONT_SIG
TAS
TAS CEN+/CEN- VIDEO_SLIDE
SPK CEN-
P_CONT
5152
5152
+12V
+5V
LGE Internal Use Only 2-65 2-66 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
❏ ACTIVE WOOFER PART CIRCUIT DIAGRAMS IMPORTANT SAFETY NOTICE
SHOULD BE REPLACED ONLY WITH TYPES IDENTI- THE SET IS NOT DELAYED UNTIL THE NEW SERVICE
CAL TO THOSE IN THE ORIGINAL CIRCUIT. SPECIAL LITERATURE IS PRINTED.
12
11
10
1
NOTE) Warning
NOTE)
NOTE)
NOTE)
Parts that are shaded are critical
With respect to risk of fire or
electricial shock.
2008.04. 07
A B C D E F G H I J K L M N O P Q R S T
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-67 2-68 LGE Internal Use Only
Only for training and service purposes
2. PWM CIRCUIT DIAGRAM
12
11
10
1 EBY43105101 (#1)
2008.04. 07
A B C D E F G H I J K L M N O P Q R S T
LGE Internal Use Only 2-69 2-70 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3. AMP CIRCUIT DIAGRAM
12
11
10
2008.04. 07
A B C D E F G H I J K L M N O P Q R S T
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-71 2-72 LGE Internal Use Only
Only for training and service purposes
4. I/O INTERFACE CIRCUIT DIAGRAM
12
11
10
2008.04. 07
A B C D E F G H I J K L M N O P Q R S T
LGE Internal Use Only 2-73 2-74 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
5. SPEAKER TERMINAL CIRCUIT DIAGRAM
12
11
10
2008.04. 07
A B C D E F G H I J K L M N O P Q R S T
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-75 2-76 LGE Internal Use Only
Only for training and service purposes
❏ ACTIVE WOOFER PART PRINTED CIRCUIT DIARGAMS
1. SMPS P.C. BOARD DIAGRAM
NOTE: Warning
Parts that are shaded are critical With
respect to risk of fire or electrical shock.
LGE Internal Use Only 2-77 2-78 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
2-1. AMP(5.1CH) P.C. BOARD DIAGRAM ( TOP VIEW )
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-79 2-80 LGE Internal Use Only
Only for training and service purposes
2-2. AMP(5.1CH) P.C. BOARD DIAGRAM ( BOTTOM VIEW )
LGE Internal Use Only 2-81 2-82 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3-1. AMP I/O P.C. BOARD DIAGRAM ( TOP VIEW )
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-83 2-84 LGE Internal Use Only
Only for training and service purposes
3-2. AMP I/O P.C. BOARD DIAGRAM ( BOTTOM VIEW )
LGE Internal Use Only 2-85 2-86 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
4-1. TERMINAL P.C. BOARD DIAGRAM ( TOP VIEW )
Copyright © 2008 LG Electronics. Inc. All right reserved. 2-87 2-88 LGE Internal Use Only
Only for training and service purposes
LGE Internal Use Only 2-89 2-90 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
SECTION 3. EXPLODED VIEWS
❏ CABINET AND MAIN FRAME SECTION 412 283
415
282
464
281
463
469
CABLE4 411 280 286
H
A46 268
B
463
A
MAIN
463
E
F 463
H
287
A50 G
HDMI 270
CABLE2 266
A54 462
CABLE1 463 288
463
A48 463
VF
A B
D
CABLE3 461
464
D 267
TO C
UCH
,P 293
AD
289
C 264
A43
260 D A49 269
263
272
262 463 E
462
F
G
290
464
284 414
415
413
261 A26 271
291
265
463
292
Copyright © 2008 LG Electronics. Inc. All right reserved. 3-1 3-2 LGE Internal Use Only
Only for training and service purposes
❏ DECK MECHANISM EXPLODED VIEW(SDP-06)
A26
001
017
007
004
A01
002 008
010
007
003 011
009
012
005 013
014
012A
432
030 022 016
006
015
439
024
025 431
036
435
A03 012A
023
012A
021
430
430
LGE Internal Use Only 3-3 3-4 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
❏ SPEAKER SECTION
1. ACTIVE SUBWOOFER(SH93TV-A)
953
A90
956
950
955 960
952A 959
954B
411
952B
961 960
954A
957 263A 474
959
951
958 475
264A
961
A52A D
962
P26A1
A I/O
962
B
C
C 964
CN901 D
962
CN902 B
A
962 AMP
JACK
965
963 E
962
A90A A45A
SMPS 310
966
A47A
Copyright © 2008 LG Electronics. Inc. All right reserved. 3-5 3-6 LGE Internal Use Only
Only for training and service purposes
LGE Internal Use Only 3-7 3-8 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
2. CENTER SPEAKER(SH93TV-C)
757 756A
756B
A70
760
753 760
758 758
751 761 761
759
760 759
754
750 755
760
760
752 753
760 WIRE70 : GREEN
751
Copyright © 2008 LG Electronics. Inc. All right reserved. 3-9 LGE Internal Use Only
Only for training and service purposes
3. FRONT/REAR SPEAKER(SH93TV-S)
858
860
855 860
852
A80A
860 854
853 A80B
861
868 862
867
863
857A 864
860 869
865
866 859
860
WIRE80 : RED(F.R)
WIRE81 : WHITE(F.L)
WIRE60 : GRAY(R.R)
WIRE61 : BLUE(R.L)
LGE Internal Use Only 3-10 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Copyright © 2008 LG Electronics. Inc. All right reserved. 3-11 LGE Internal Use Only
Only for training and service purposes
❏ PACKING ACCESSORY SECTION
808 BATTERY
804 BAG
803 PACKING, CASING
802 BOX
SPEAKER CABLES
WIRE80 RED 4M (F.R)
WIRE81 WHITE 4M (F.L)
WIRE70 GREEN 4M (CENTER)
WIRE60 GRAY 10M (R.R)
WIRE61 BLUE 10M (R.L)
LGE Internal Use Only 3-12 Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes