You are on page 1of 5

Well Parameters M

OMM-1 DT-2
Hrs
FTHP CHP Line Temp Flow Rate FTHP CHP Line Temp
(Psi) (psi) Deg C mmscfd (Psi) (psi) Deg C
Ref. Parameter 830 70 6.4+_0.3 2165 2165 78
8:00
9:00
10:00
11:00
12:00
13:00
14:00
15:00
16:00
17:00
18:00
19:00 850 - 71.3 6.1 2169 2171 79
20:00 843 - 70 6.1 2169 2171 78
21:00 843 70 2168 2171 78
22:00 827 67 2168 2171 78
23:00 821 69 2168 2171 78
0:00 819 69 6.15 2168 2171 78
1:00 817 69 2167 2171 78
2:00 814 69 2168 2171 78
3:00 812 69 2167 2171 78
4:00 811 71 2167 2171 78
5:00 809 70 2167 2171 78
6:00 818 70 6.1 2167 2171 78
7:00 808 71 2167 2171 78
8:00 818 70 2165.75 2168 78
822 #DIV/0! 70 6 2168 2171 78
OMM-1 Parameter Changes DT-2 Parameter Changes
FTHP Drop(psi) 32 FTHP Drop(psi)
CHP Drop(psi) NA CHP Drop(psi)
Flow Change(mmscfd) 6.1 Flow Change(mmscfd)
Line Temp Increase( deg C) NA Line Temp Increase( deg C)

# Highlights
1 DT-2 Flow line leakage observed at 10:00 am. Leakaged line isolated and flow normalized through 2nd flo
2 DT-2 is under testing and observed flow fluctuation (Test Separator FT)
3 Observed 12-W-0C pressure drop up from 1026 psi to 945 psi and then started increasing. 12-W-0C test
4 SGL-18 well opened at 13:00 hrs and closed at 10:00 pm and THP: Electric Memory guage discharge. CHP
5 11-W-0B opened at 02:40 Hrs. THP: 1000 psi and CHP: 1700 psi
6 11-E-0 well opened at 05:40 hrs. THP: 1237 psi and CHP: 1414 psi.
Well Parameters Monitoring Report (SCADA)

-2 SGL-7 11-W-2A
Flow Rate FTHP CHP Line Temp Flow Rate FTHP CHP Line Temp Flow Rate
mmscfd (Psi) (psi) Deg C mmscfd (Psi) (psi) Deg C mmscfd
12.8 350 80 1.5-3 460 105 1

12.1 367.5 - 81.27 2.1 464.6 - 105 1.5


12.1 357.19 - 80.18 2.1 460 - 105 1.5
329 80 470 105
337 80 478 105
329 78 478 105
329 78 478 105
12.2 331 80 2.45 468 105 0.8
340 80 463 105
358 80 475 105
340 80 466 105
355 80 465 105
12.35 357 80 3.12 464 105 0.8
359 80 465 105
367 80 464 105
12 347 #DIV/0! 80 2 468 #DIV/0! 105 1
ter Changes SGL-7 Parameter Changes 11-W-2A Parameter Changes
3.25 FTHP Drop(psi) Nil FTHP Drop(psi) 0
3 CHP Drop(psi) Nil CHP Drop(psi) NA
(+)0.25 Flow Change(mmscfd) 1.02 Flow Change(mmscfd) 0.7
-1 Line Temp Increase( deg C) 1.27 Line Temp Increase( deg C) Nil

Highlights
flow normalized through 2nd flow line at 13:00 Hrs without flow interrution.

tarted increasing. 12-W-0C test separator water side full. Drained at 20:30 Hrs.
Memory guage discharge. CHP: 1450 psi.
Reporting Time 08:00 am to 08:00 am
Recording Date 10-09-2018 8:00 am - 11-09-2018 8:00 am
Well Name
SGL-21 Sonara-1 11-W-3A
FTHP CHP Line Temp Flow Rate FTHP CHP Line Temp Flow Rate FTHP
(Psi) (psi) Deg C mmscfd (Psi) (psi) Deg C mmscfd (Psi)
350 30 0.25 500 39 1185

363 - 36.59 0.25 488.4 - 39.81 1.8 1187.8


355 - 35.15 0.25 487 - 38.7 1.8 1186
339 33.69 500 37 1186
331 32.8 502 37 1185
326 31 492 35 1185
323 30.4 490 35 1.6 1185
325 29 0.25 499 35 1185
331 29 491 34 1184
323 29 493 34 1184
329 28 495 34 1184
335 28 490 34 1184
334 28 0.25 487 33 1.6 1184
338 28 475 31 1184
336.5 30 450 33.4 1 1184.6
335 #DIV/0! 31 NA 489 #DIV/0! 35 2 1185
SGL-21 Parameter Changes SONARA-1 Parameter Changes 11-W-3A Paramet
FTHP Drop(psi) 26.5 FTHP Drop(psi) 39 FTHP Drop(psi)
CHP Drop(psi) NA CHP Drop(psi) CHP Drop(psi)
Flow Change(mmscfd) Nil Flow Change(mmscfd) 0.8 Flow Change(mmscfd
Line Temp Increase( deg C) -6 Line Temp Increase( deg C) -6.5 Line Temp Increase( deg
08:00 am
11-09-2018 8:00 am

11-W-3A 11-E-O 12-W-OC


CHP Line Temp Flow Rate FTHP CHP Line Temp Flow Rate FTHP CHP
(psi) Deg C mmscfd (Psi) (psi) Deg C mmscfd (Psi) (psi)
48 3.7 1012

- 49.8 3.64 - - - - 1026 -


- 49 3.64 - - - - 963 -
48 - - - - 979
48 - - - - 1018
48 - - - - 990.75
48 - - - - 1065
48 3.71 - - - - 995
48 - - - - 998
48 - - - - 978.9
48 - - - - 1006
48 - - - - 982
48 3.74 - - - - 1000
48 - - - - 989
48 - - - - 984.31
#DIV/0! 48 4 998 #DIV/0!
11-W-3A Parameter Changes 11-E-0 Parameter Changes 12-W-0C Parameter Cha
FTHP Drop(psi) 3.2 FTHP Drop(psi) NA FTHP Drop(psi)
CHP Drop(psi) NA CHP Drop(psi) NA CHP Drop(psi)
Flow Change(mmscfd) (+)0.1 Flow Change(mmscfd) NA Flow Change(mmscfd)
Line Temp Increase( deg C) -1 Line Temp Increase( deg C) NA Line Temp Increase( deg C)
12-W-OC
Line Temp Flow Rate
Deg C mmscfd
96 1.5

96 1.8
95.11 1.4-1.9
94.7
95
95
95 1.53
95
95
95
95
95
96 1.5
96
95
95 2
12-W-0C Parameter Changes
FTHP Drop(psi) 41.69
CHP Drop(psi) NA
w Change(mmscfd) 0.3
emp Increase( deg C) Nil

You might also like