Professional Documents
Culture Documents
Department of Education
Region VI
Aklan National High school for Arts and Trades
Andagao, Kalibo, Aklan
TRAINING PLAN
Qualification: Technical Drafting NCII
Facilities/
Trainees’ Training Training Mode of Assessment Date and
Staff Tools and Venue
Requirements Activity/Task Training Method Time
Equipment
1. Search for TESDA Focal Pens/ Aklan
prospective Pencils National Sept.15-30,
industry (Department High School 2014
Papers
partners Head) for Arts and
2. Send proposal Printers Trades,
letters (follow-up Department Computer Andagao,
and visitation) Secretary unit Kalibo,
3. Set an Internet Aklan
Appointment for
Presentation Industry
4. Presentation Supervisor
5. Conduct Site
Visit for Work-
Based Training
Plan
6. Finalize the
Training Plan
and
Memorandum of
Agreement
(MOA) or
Memorandum of
Understanding
(MOU)
7. Present the
training Plan
and MOA/MOU
for approval
8. Placement of the
trainees in the
industry
9. Coordination
and Monitoring
10. Work-based
training
Evaluation
Computer/
Laptop
Eraser
Drawing
Template
Sharpener
Pen/Pencil
LO4: Submit 4.1 Complete On-Job TESDA Focal, Complete Provincial Observation October
complete drawings drawing is training Industry focal working Engineering with Oral 5-6, 2014
submitted to supervisor drawing, Office- Questioning
personnel pencil and Kalibo, Aklan From
(Provincial
following SOP. Checklist 7:30-11:30
Engineering am to 1:00-
4.2 Comments and Office- Kalibo, 5:00 pm
corrections are Aklan)
noted for final
drawings
following SOP.
4.4 Housekeeping
procedure is
performed
following SOP
LO3 Lay-out and 3.1 Sheet On-Job TESDA Focal, Computer/ Provincial Observation October
produce computer- requirement training Industry focal Engineering with Oral 8-11, 2014
Laptop
aided drawings and accomplishme supervisor Office- Questioning
details nt procedure is External Kalibo, Aklan From
(Provincial drive
performed 7:30-11:30
following Engineering am to 1:00-
CAD
technical Office- Kalibo, software 5:00 pm
drawing Aklan))
Recordable
standards and or
symbols rewritable
CD
3.2 Review
procedure for
final drawing is
performed
following job
requirements.
3.3 Page set-up
and scaling
procedure is
performed
based on
technical
drawing
requirements
and printer
characteristics.
3.4 Saving and
backup
procedure for
final working
drawing is
performed in
accordance with
enterprise
procedure.
LO 4 Submit 4.1 Complete On-Job TESDA Focal, Complete Provincial Observation October
complete drawing drawing is training Industry focal computer- Engineering with Oral 11-12, 2014
submitted to supervisor aided Office- Questioning From
personnel drawing, Kalibo, Aklan 7:30-11:30
(Provincial
following SOP. pencil and am to 1:00-
Engineering 5:00 pm
4.2 Comments and Checklist
Office- Kalibo,
corrections are Aklan)
noted for final
drawings
following SOP.
4.3 Comments and
corrections are
integrated into
final drawing
based on job
requirements
4.4 Housekeeping
procedure is
performed
following SOP
Approved by: