Search: go!

Auto Gauges | Bimetal Thermometers | Pressure Gauges | McDaniel | MARSH | Contact Us | Site Map

Can I refill my 1.5" liquid filled gauge?

Yes, but to prevent having different layers of fluid we recommend fully draining, rinsing, drying and
then refilling.

Once you have fully drained, rinsed and dried out your gauge you can fill it with glycerin, silicone or
mineral oil.

Remove the black rubber fill plug and drain the gauge.
Rinse the gauge with water, drain and allow to dry. Repeat until you have removed all of the
silicone from the gauge.
Refill with glycerin, silicone, or mineral oil. Leave an air bubble to allow room for the fluid to
expand when the gauge heats up.
Carefully reinstall the rubber fill plug.

Back to FAQs

About Us · Search Catalog · FAQs · Contact · Site Map · Home

©2020 Marshall Instruments, Inc. info@marshallinstruments.com

Design: BWE, Inc. 1-714-632-8565

Auto Gauges Thermometers McDaniel Marsh

Comp II LED 1" Dial (K) 2" All SS (Q3) General Service
Comp II 1½" Dial (A) 2½" All SS (K) Liquid Filled, 63mm
SCX 2¼" Dial (B) 2½" SS/Brass (J) Diaphragm Gauge (G)
SCX Sport 3" Dial (E) 4" All SS (G) Process Gauge (P)
60's Muscle 3" Asphalt (E) 4½" Process (MPB/SC) Quality Gauge (H)
MINI Cooper 3" Bottom Mount (J) 6" All SS (H) Inspector Test (D)
1.5" Mechanical 3" Asphalt (J) All McDaniel Gauges Test Gauge (D)
Accessories 3" Adjustable (ADJ3) All MARSH Gauges
5" Dial (G) PDF Catalogs
5" Adjustable (ADJ5) All Stainless PDF Catalogs
5" Bottom Mount (GJ) General Service MARSH Product Catalog
Engine Thermometers Fillable All SS Utility
Capillary Process Gauges
Industrial Filled SS/Brass Utility
Bimetal (J6, T6)
SS/Brass Utility (R7, T7,
Needle Valves J7)
Needle Valves
Steel Case Utility (R8,
T8, J8)