Professional Documents
Culture Documents
Development Team
Prof. Vinay Gupta, Department of Physics and Astrophysics,
Principal Investigator
University of Delhi, Delhi
Statistical Mechanics
Physics
Equilibrium, Thermodynamic Parameters and Response Functions
Description of Module
Subject Name Physics
Paper Name Statistical Mechanics
Module Name/Title Equilibrium, Thermodynamic Parameters and Response Functions
Module Id
Statistical Mechanics
Physics
Equilibrium, Thermodynamic Parameters and Response Functions
Contents of this Unit
1. Introduction
2. Meaning of Equilibrium vis-à-vis Observation Time
3. Extensive and Intensive Parameters
4. Thermodynamic Equilibrium: Three Types of Equilibrium
5. Statistical Equilibrium and Relaxation Time
6. Non-Equilibrium and Irreversible Processes
7. Generalised Forces and Response Functions
8. Summary
Learning Outcomes
Statistical Mechanics
Physics
Equilibrium, Thermodynamic Parameters and Response Functions
1.INTRODUCTION
State of equilibrium and non-equilibrium are intuitively the most subtle concepts in the study of
thermodynamics and statistical mechanics. It is one of the very fundamental questions to pose that
when can we say that a system is in equilibrium and when is it not. In this module we shall explore the
meaning of equilibrium as applied to thermodynamics and statistical mec hanics in the context of
macroscocopic systems encountered in the physical world.
Indeed thermodynamic equilibrium is a macroscopic phenomenon, it has no meaning in the case of an
isolated particle. A macroscopic system consists of a large number of particles ( ) under a given
physical condition in a particular equilibrium state described by various parameters such as Pressure P,
temperature T, magnetic field H etc. which can be tuned from outside as external conditions. As the
external conditions change the state of the system may change from one equilibrium state to another.
Following table 1 describes state of matter in equilibrium at specified external conditions. If the
external conditions change the system may go from one state of equilibrium to another,
An intuitive and plausible way to understand the meaning of equilibrium is with relation to observation
time. It will be nice to look at a few examples. Let us take the case of warm water in a thermos flask, it
remains warm over a long period of time implying that if you record the temperature of water over a
period of an hour you will find it has not changed. Pour the same water in a cup. For a couple of
minutes you may find that water remains at the same temperature, but if you wait for half an hour you
will find that water has cooled down and it is not in the same state when it was poured into the cup.
Also take a cup of water at room temperature, you can notice it has a definite volume and this volume
stays the same after a few hours, however, if you observe the level of water say after three or four days
you will notice that, may be half of water has evaporated. This has happened because evaporation
caused removal of the water molecules from the cup, though temperature may have stayed the same.
Statistical Mechanics
Physics
Equilibrium, Thermodynamic Parameters and Response Functions
Therefore, one can conclude that equilibrium has a meaning for a given system provided observation
time is not too large.
By keeping water in a thermos flask, you have been able to prolong the state of equilibrium through
isolation, making cooling of water a very slow process. In simple words we can say that if we observe
a system over a short enough time that its state remains unchanged, system is in equilibrium.
It must be underlined here that no system is in a state of absolute equilibrium i.e. in equilibrium over
an infinite period of observation time. Absolute equilibrium is in a sense idealization, which does not
normally happen in reality because no system can be practically made completely isolated.
Before we further discuss the meaning of thermodynamic equilibrium, it will be nice to understand the
meaning of thermodynamical parameters e.g. Temperature, Pressure, Volume, Entropy etc. which may
be needed to identified for a system in equilibrium. Infact by specifying these parameters, we specify
the state of a system. Broadly, thermodynamical parameters can be classified into two types:
Extensive parameters: As the name suggests these are the parameters whose value depends on the
extent of the system or simply put the size of the system. These parameters are diretly proportional to
the size of the system. If size of the system becomes times the original size the corresponding
parameter should also become times the original value
There is another way of visualizing the meaning of an extensive parameter. Imagine we have a
macroscopic system having two parts as shown in the figure 1 below
I II
If an extensive thermodynamic parameter of the composite system is Y and of part I and two are
respectively YI and YII then Y is said to be extensive if Y=YI+YII.
For example mass, volume, entropy, Energy are extensive parameters. Therefore, an extensive
parameter of a system in equilibrium has a value which is sum of the values of each part of the system.
Statistical Mechanics
Physics
Equilibrium, Thermodynamic Parameters and Response Functions
Intensive parameters: Intensive thermodynamical parameters of a macroscopic system in equilibrium
is independent of the size of the system. With reference to figure 1, if Y is an intensive parameter than
Y=YI=YII. For example, temperature, pressure, chemical potential.
Here, again it is worth noting that intensive parameters are homogeneous functions of zero degree of
the variables on which they depend.
By checking the degree of thermodynamic parameters, we can keep an eye o n their intensive and
extensive nature.
Also Euler’s theorem which states that if is a homogeneous function of degree n
then
n = (1)
By inverting the functional form of S we can also write Internal Energy, U, which is also an extensive
parameter is a homogeneous function of degree one of the entropy, S, the vo lume, , and the quantity
of matter represented by number of particles in the system, , of the system
Therefore,
(3)
On comparison of the above two equations with well-known expression for conservation of energy in
thermodynamics
(4)
Where first term on the right hand side corresponds to increase in heat, mechanical work done and
chemical work done respectively. We get the following definitions of intensive parameters in terms of
entropy and internal energy respectively
, , (5)
, , (6)
These are very useful relations which can be used later to arrive at interesting results once entropy or
internal energy are known to us.
Statistical Mechanics
Physics
Equilibrium, Thermodynamic Parameters and Response Functions
For example knowing equation of state and internal energy of the classical
ideal gas we can write entropic forms of the equation of state and internal energy and hence classical
entropy of the monoatomic gas and deduce functional form of entropy as a function of U,V,N.
Thermal equilibrium means that every part of the system and the surroundings are not experiencing
any change in temperature with time. Mechanical equilibrium means that net external forces and net
external torques acting on the system are zero. Chemical equilibrium means that there are no chemical
reactions taking place in the system and the concentration of the constituent particles of the system is
constant with respect of time. Thermal equilibrium is related with constancy of temperature. Mechnical
equilibrium means constancy of pressure and chemical equilibrium means constancy of chemical
potential.
If a macroscopic system and its macroscopic subparts have macroscopic physical quantities equal to
their mean values, the system is in Statistical equilibrium. In other words if a macroscopic system is
observed over a long enough time than for most part of the observation time it will be in a state of
statistical equilibrium. It is possible that a macroscopic system may by some external interaction at a
given instant of time not in statistical equilibrium, it will after the disturbance ceases to act shall come
back to the state of equilibrium. This time which it takes to come back to the state of equilibrium is
known as relaxation time.
When a system is not in equilibrium there is some action from outside the system. Sometimes we
wonder that most the phenomenon which we see around us are not in a state of thermodynamic
equilibrium. For example weather pattern. If we analyse closely we shall find that the cause of weather
patterns is from outside the earth in the form of solar radiations. Also energy flows out of the earth
also. As long as this exchange of energy shall continue system will not be in a state of equilibrium.
When by applying a potential difference across a wire current flows, we have created a state of non-
equilibrium. As long as the system is in this state of energy input the non-equilibrium process will last.
Statistical Mechanics
Physics
Equilibrium, Thermodynamic Parameters and Response Functions
Another simple example that brings in non-equilibrium, is the case of two cups of water at
different temperatures brought in thermal contact with each other. In this case system shall evolve from
a state of non-equilibrium to an equilibrium and the two cups of water will come to the same
temperature. Now if we desire that the water in the two cups comes back to their original temperatures
it will not be possible because the process is irreversible. In this course we are only interested in
systems in systems in equilibrium only
Statistical Mechanics
Physics
Equilibrium, Thermodynamic Parameters and Response Functions
8. Summary
The meaning of equilibrium for a macroscopic system and that it may involve thermal
equilibrium or mechanical equilibrium or chemical equilibrium or all three.
That observation time decides whether we are looking at a system in state of equilibrium or not.
Large observation time may allow system to change the state.
That thermodynamic parameters are of two types, e xtensive and intensive. Extensive
parameters are homogeneous functions of order 1 and intensive parameters are homogeneous
functions of order 0. Therefore, extensive parameters scale with size, wheras intensive
parameters are independent of the size of the system.
The meaning of relaxation time vis-à-vis the transition of a perturbed system into equilibrium
state once the perturbation is removed.
The notion of irreversible process in the transition of a system from non-equilibrium system.
The concept of generalized forces and corresponding generalized co-ordinates encountered in
thermodynamics related to the response of the system in terms of a measurable quantity.
Statistical Mechanics
Physics
Equilibrium, Thermodynamic Parameters and Response Functions