Professional Documents
Culture Documents
Production Engineering II
Note:
- Q3 is writing a short essay. You have only 24 hours to answer and submit
your answer.
- State clearly any assumptions used and intermediate calculations made in
numerical questions. No marks can be given for an incorrect answer if the
method of calculation is not presented.
B- After performing a hydraulic fracturing job, well started producing 25% water (fw
= 0.25). a production test was conducted after the frac job and the following data
were obtained (15 Marks)
Pwf (psig) Q (STB/Day)
3662 2000
Determine the anticipated oil production rate (STB/Day) after the frac job at the
flowing bottom hole pressure of 2000 psig. Is this a successful frac job? Explain!