Professional Documents
Culture Documents
Date : 2018-12-27
whole tire pre-processing , you will get < 50*50MM rubber crumb
1 Single hook debeader LS-1200 USD7200. 1 11 KW USD7200.
Rubber powder processing: you will get 10-30 mesh rubber powder,at the same time, separate
the fiber and steel wire
6 Rubber Crushing Mill XKP-450 USD19800 1 55 KW USD19800
running the production line, you should bear his travel fee, board and lodging in your country, and his
salary at usd60/day.
Item 6- 13
III. Specification of each machine
Model: LS 1200
Capacity:20-40 tires/hour
Pulling force(T): 13
Max.tire diameter 1200mm
Power(KW): 7.5 KW
Stroke distance: 1300mm
Dimension(L*W*H): 3.6*0.78*1.02
Weight: 2500KG
3.2. Whole tire cutter(used for bigger than 900MM tyres , if the diamter of your tyre
is smaller than 900mm, no need this )
Model :WTC1200
Capacity:-3500kg/h
Motor power:5.5kw
Tire range:Max 1200mm
dimension:2080*1000*2130mm
3.3 .whole tyre shredder(with whole tyre conveyor and shredded block conveyor)
1) Model: ZPS900
2) Size of feeding: ≤900 whole type
3) Size of Discharge: < =50*50mm
4) Capacity(kg/h): 800-1500
5) Main motor (2 motors ): 30KW*2=60KW ,
6) Dimension(L*W*H)(m) :3.8*2.1*2.5
7) Number of knife: 18 PCS
8) Rotary speed: about 20 r/min
9) REMARKS:
9.1 gear box: hardness teeth, Model: ZSY315, not ZQ series
9.2, knives: material: H3 , Germany standard , forged, heat treatment by high
frequency, some factory only use 45# steel, the Price is more cheaper(only 1/3 of H3 ),
but the life is more shorter! The life of the knives is the most important for the shredder
machine.
capacity:1000kg/h
Motor power:5.5*2 kw
dimension:1.5*1.5*3.4(m)
weight:about 1.5T