Professional Documents
Culture Documents
Sl. No. Name of Test Test Rate (Tk.) Sl. No. Name of Test Test Rate (Tk.)
Aggregate Bitumen
1 Water Absorption 4000/- 1 Bitumen Content ( Extra 4000/- for Chemicals) 8800/-
Aggregate Crushing Value(ACV)/
2 4400/- 2 Design of Asphalt Concrete mixes (Marshall) 46000/-
Compressive Strength
3 Aggregate Impact Value(AIV) 3300/- 3 Theoretical Max Sp. Gr. A.C. mixes 4400/-
4 L.A. Abrasion of CA 4400/- 4 Coating and Stripping Test 4200/-
5 L.A. Abrasion of Ballast 4600/- 5 Ductility (Extra 300/- for chemicals) 2900/-
6 Bulking of Sand 5500/- 6 Flash and Fire Points 3000/-
7 CBR of Base or Sub-base Materials 33600/- 7 Float Test 3000/-
8 Clay Lump & Friable Particles 3300/- 8 Loss on Heating 3700/-
Softening Point (R & B) (Extra 300/-
9 Coal & Lignite (Extra 2500/- for Chemicals) 3300/- 9 2900/-
for chemicals)
10 Elongation Index(EI) 5000/- 10 Solubility (Extra 300/- for chemicals) 2900/-
11 Flakiness Index(FI) 5000/- 11 Specific Gravity 3000/-
12 Angularity Number(Including Sp. Gr.) 5500/- 12 Standard Penetration/Grading 3000/-
13 Mica Content of FA Using Microscope 15000/- 13 Viscocity (Saybolt Furol/Universal) 5500/-
Organic Impurities/Salt Content/Sulphate
14 3000/- 14 Viscocity ( Kinematic) 7200/-
Content
Effect of Organic Impurities( Extra 1500/- for
15 10500 15 Viscocity (Absolute/Dynamic) 11000/-
chemicals)
16 Stanndard Proctor Test of Aggregate(MDD) 13200/- 16 Water Content 6600/-
17 Modified Proctor or Vibrating Hammer 22000/- 17 Distillation 8800/-
Any Test on Residue form Loss on
18 Specific Gravity 3500/- 18 5500/-
Heating Test/TFOT
Sieve Analysis/Gradation/(Cc, Cu)/(D10, D30,
19 3900/- 19 Any Test on Residue form Thin Film Oven Test 5500/-
D60)/FM etc. (for coarse Aggragate)
Sieve Analysis/Gradation/(Cc, Cu)/(D10, D30,
20 2500/- 20 Ash Content/ Inorganic Matter 5500/-
D60)/FM etc. (for fine Aggragate)
Sieve Analysis/Gradation/(Cc, Cu)/(D10, D30,
21 5000/- 21 Spot Test 3000/-
D60)/FM etc. (for ballast)
22 Wash Sieve Analysis 3000/- 22 Thin Film Oven 3700/-
Soundness with Na2SO4 ( Extra 4000/- for
23 11000/- 23 Naphta Xylene Equivalent 12700/-
Chemicals)
Soundness with Mg2SO4 ( Extra 6000/- for
24 11000/- 24 Foaming Test 3000/-
Chemicals)
25 Ten Percent Fines (T.F.V) 6600/- 25 Particle Charge Test of Bitumen Emulsion 3500/-
26 Unit Weight (CA) 2900/- 26 Marshall Stability and Flow Test 3900/-
27 Unit Weight (FA) 2600/- 27 In-situ per Core Cutting 6600/-+*
28 Void Ratio/Porosity/Moh. Hardness 5000/- 28 Job Mix Formula and Marshall test 88000/-
29 Dust Content 2500/- 29 TSR ( Tensile Strength Ratio) test 48500/-
Material Finer than #200 Sieve/Fine
30 3900/-
Content/Silt Content
31 Moisture content (Free/Evaporable/Total) 2000/- Manhole Cover **
Percentage of uncrushed paticle
32 5000/- 1 Load & Weight test (<450 mm Dia) 6500/-
(fractured face)
Foreign Material Content/Deleterious
33 12000/- 2 Load & Weight test (>450 mm Dia) 7200/-
Substance
34 Alkali-Silica Reactivity for Stone/Sand 15000/- ** Manhole covers have to be taken away by the Client,
immediately after the test is performed
Notes: * Field visit fee: Inside Rajshahi City Corp. = Tk. 13,000/day; Outside Rajshahi City Corp. = Tk. 18,000/day; Near Districts (No overnight stay) = Tk.
25,000/day and Tk. 30,000/day (overnight stay); Farthest Districts (No overnight stay) = Tk. 35,000/day and Tk. 40,000/day (overnight stay); Remote Districts
Tk. 45,000/day (overnight stay).
[Transport, local hospitalities, accommodation (in case of overnight stay) etc. are to be provided by the Client]
1 of 5
Sl. No. Name of Test Test Rate (Tk.) Sl. No. Name of Test Test Rate (Tk.)
Bricks (For ASTM=5 Nos., BS=10 Nos.) Destructive and NDT Tests
In-Situ per core cutting & testing (without
1 Water Absorption (ASTM, BS) 2200/- , 4200/- 1 5800/- + *
scanning)
In-Situ per core cutting & testing (with quick
2 Crushing Strength (ASTM, BS) 4400/- , 7200/- 2 12000/- + *
scanning)
Efflorescence (required 10 nos. additional In-Situ Hammer Test -
3 4400/- 3 6100/- + *
bricks) per spot / location (min. 3 tests)
In-Situ Winsor Pin Test - per spot / location
4 Size & Shape 2800/- 4 5500/- + *
(min. for 3 tests)
5 Unit Weight (ASTM, BS) 3900/- , 5200/-
6 Acid Resistance (Vitriol) 7500/- Calibration (Out-side Lab. Field Visit Fee Applicable)
7 Initail Rate of Absorption/Suction for Brick 3100/- 1 Pressure Gauges/ Dial Gauges 4900/-
2 Hydraulic jack without Pressure Gauges 13000/-
Hydraulic Jack (calibration range up to 300 ton) with
Special Bricks (1 set= 3 nos.) 3 pressure gauge (Regular : < 500 kg)
22500/-
Compressive Sterngth of Hollow Brick, Paver, Hydraulic Jack (calibration range up to 300 ton) with
1 3300/- 4 pressure gauge (Heavy : > 500 kg)
30000/-
Concrete Blocks etc.
Hydraulic Jack (calibration range up to 1000
2 Compressive Sterngth of Road Kerb Stone 4000/- 5 50000/-
ton) with pressure gauge
3 Absorption 2200/- 6 Deflection Dial 3400/-
4 Unit Weight 3900/- 7 Proving Ring(<100 KN) 5000/-
8 Proving Ring (100-500 KN) 6000/-
Cement 9 Proving Ring (>500 KN) 7000/-
Compressive Strength (3 & 7 days)
1 8200/- 10 Compression Testing Machine 6500/- + *
(ASTM/AASHTO)
Compressive Strength (3, 7 & 28 days)
2 8800/- 11 Dynamometer 9700/-
(ASTM/AASHTO)
Compressive Strength (2 & 7 days)
3 26000/- 12 Balance upto 20 kg 6500/-
(EN)
Compressive Strength (2, 7& 28 days) Compression / TensionTesting Machine
4 33000/- 13 11800/-
(EN) (with one dial)
5 Fineness 2800/- 14 Calibration of Concrete Mix Batching Plant 288000/-
Electronic Balance up to 20kg / Platform
6 Normal Consistancy 2600/- 15 8800/-
Scale / Balance
7 Setting Time 4000/- 16 Electronic Balance > 20kg 12800/-
8 Density / Sp.Gr. 4000/- 17 CA measuring potable fara / Measuring cub 4500/-
9 Weight of cement bag 700/- 18 Schmidt Hammer (Rebound) 11500/-
Tensile Strength (3 & 7 days)
10 8800/- 19 Weight < 2kg / Load Cell (Weight Box 17800) 8800/-
(ASTM/AASHTO)
Tensile Strength (3, 7& 28 days)
11 11000/- 20 Balance up to 300kg 13000/-
(ASTM/AASHTO)
12 Soundness 10000/- 21 Balance above 300kg to 1000kg 17000/-
22 Balance above 1000kg 26000/-
2 of 5
Sl. No. Name of Test Test Rate (Tk.) Sl. No. Name of Test Test Rate (Tk.)
R.C.C. Pipes (Max. Length of Pipe is 2'-6") Steel (For a set of 3 nos.) & Miscellaneous
1 Pipe (Dia upto 600 mm) 6000/- 29 Coupler above 32mm, for a set of 1 No. 2800/-
MS Bar (60 Grade) above 32 mm &
2 Pipe( Dia above 600mm and upto 900mm) 7500/- 30 3800/-
up to 50 mm
3 Pipe ( Dia above 900 mm) 10000/- 31 MS Bar (60 Grade) above 50 mm 9000/-
4 Insitu Pipe Testing 5000/- + * 32 Elongation at 5D as per ISO 6935 Per Set 900/-
33 Shaft Rod > 30 mm & < 40 mm. 5100/-
PVC, FG, GI & Housing Pipe (Each) 34 Shaft Rod > 40 mm & <50 mm 6000/-
1 Hydrostatic Pressure(PVC pipe) 4500/- 35 Shaft Rod > 50 mm 7000/-
3 of 5
Sl. No. Name of Test Test Rate (Tk.) Sl. No. Name of Test Test Rate (Tk.)
Field density test per spot (**additional
Soil 33 charge will be applicable for Proctor/max- 50000/- + ** + *
min density and sieve/Hydrometer tests)
1 Specific gravity (Sp. Gr.) 2100/- 34 Non-repetitive Plate Load Test per Location 120000/- + *
2 Unit weight (wet & dry) 2000/- 35 Pin Hole Test (3 Nos. specimen) 10000/-
3 Void ratio 3300/-
4 Moisture content 1000/- ELASTOMERIC BEARINGS / CFRP and GFRP Wraps /
CFRPEpoxy Resin,
Strip/CFRP Primers
wraps -Tensile and Epoxy
Strength, based
Modulus of Mortars
5 Linear shrinkage 2000/- 1 elasticity,Elongation - ASTM D3039
14000/-
Epoxy Resin, Primers and Epoxy based Mortars -
6 Skrinkage limit 1700/- 2 Compressive Yield Strength and Modulus @ 14days - 10500/-
ASTM D695:08
Epoxy Resin, Primers and Epoxy based Mortars -
7 Liquid limit and Plastic limit 3300/- 3 Tensile Strength & Elongation at Break @ 14days - 14000/-
ASTM D638:08
4 of 5
Sl. No. Name of Test Test Rate (Tk.) Sl. No. Name of Test Test Rate (Tk.)
SUB SOIL EXPLORATION (Per Bore) (Minimum 2 Nos. Bore) MISCELLANEOUS PARAMETERS
1 Test and Report Preparation (Upto 40 ft.) 12000/-+*+ ** 1 Acidity 500/-
2 Test and Report Preparation (Upto 60 ft.) 14000/-+*+ ** 2 Carbonate (CO3) 1000/-
3 Test and Report Preparation (Upto 100 ft.) 18000/-+*+ ** 3 Ammonia-Nitrogen (NH3-N) 1000/-
4 Nitrate- Nitrogen (NO2-N) 1000/-
5 Total Nitrogen 6500/-
WATER (Min. Test Fee Tk. 1000/-) 6 Aluminium (Al) 4500/-
1 Drinking Water (Full Package) 7000/- 7 Arsenic (As) 1800/-
2 PH/ Hydrogen Ion Density 500/- 8 Bromine Content (BR) 900/-
3 Colour (Filtered) 500/- 9 Total Chloride Content, Cl2 900/-
4 Carbondioxide(CO2)/Acidity 500/- 10 Free Chloride Content, Cl2 900/-
5 Chloride (Cl-) 900/- 11 Break Point Chlorination 7500/-
6 Fluoride (F) 900/- 12 Hydrogen Sulphide (H2S) 900/-
7 Iron (Fe) 1500/- 13 Iodine Content (I) 900/-
8 Manganese (Mn) 1800/- 14 Mercury (Hg.) 5000/-
9 Alkalinity/ Bicarbonate 700/- 15 Phosphate Content (PO4) 900/-
10 Total Hardness 900/- 16 Sulphite (SO3) 900/-
11 Arsenic (As) 1800/- 17 B/Ba/Ca/Cr/Cu/Cd/K/Na/Ni/Pb/Zn (Each) 1800/-
12 Turbidity 500/- 18 Oil and Grease Content in Water 3000/-
13 Nitrate-Nitrogen (NO3-N) 900/- 19 Organic Matter 2500/-
20 E-Coil/Faecal Coliform 1500/-
AGRICULTURE USE 21 Total Coliform (TC) 1500/-
1 Boron (B) 3000/- 22 Total Solids (TS) 900/-
2 Electric Conductivity (EC) 700/- 23 Total Suspended Solids (TSS)/ (TSS+TDS) 1800/-
3 Magnesium Density (Mg) 4000/- 24 Pb/Cd Release of Tableware (Each) 1800/-
4 Sodium (Na) Density (SAR) 4000/- 25 TKN 12000/-
26 Silica Content (SiO2) 900/-
POLLUTION STUDY 27 Total Phosphorous (P) 4500/-
1 Biochemical Oxygen Demand (BOD) 2000/- 28 Total Organic Carbon (TOC) 6000/-
2 Chemical Oxygen Demand (COD) 2000/- 29 Dissolved Organic Carbon (DOC) 7500/-
3 Dissolved Oxygen (DO) 900/- 30 Silver (Ag) 3500/-
4 Sulphate (SO4) 900/- 31 Silt Density Index (SDI) 6500/-
5 Colour (Scanning) 900/- 32 Sodium Absorption Ratio (SAR) 4000/-
6 Total Dust per Sample 5000/- 33 Algae / Chlorophyll 10500/-
34 Nickel (Ni), Cobalt (for Drinking Water) 2500/-
SAMPLING VISIT 35 Total Iron (Fe) - Phenanthroline Method 900/-
1 Sampling for Bacteriological Analysis 6500/- + * 36 Ferrous Iron (Fe2+) / Ferric Iron (Fe3+) 1300/-
Total Coliform(TC)/Thermotolerent Coliform
2 Sampling for Physical and Chemical Analysis 6500/- + * 37 1200/-
(TTC)