Professional Documents
Culture Documents
In analyzing the result for the first part of the experiment that each member of the group
abled to compute the current and power with a given values of 10-100 V and 10 ohms for ten
trials respectively. In computing the current the group used the formula of Ohm’s Law with the
formula of V=IR, where V is the voltage, I is the current and R is the Resistance. After that the
group computed the power using the Power Formula with the formula of P=I2R=VI=V2/R, where
P is the power, I is the current, V is the voltage and R is the resistance. Using the different kinds
of Power Formula, the group abled to compute the Resistance that is 10 ohms which is equal to
In the second part of the experiment the group used TINA. TINA is a circuit simulator for
analog, digital, MCU and mixed circuit simulation with integrated PCB design. The figure
showed in the screenshot section is a schematic diagram of the circuit given by the manual. After
designing the schematic diagram, the group input a value in the source voltage of 10 V and 10
ohms in the resistor then the schematic diagram will provide the value of current which is equal