Professional Documents
Culture Documents
Yellowpumps offer a comprehensive range of high quality heavy duty slurry, sludge and interchangeability of components and variations to extend the life of components. Wear
water pumps. Available for immediate sale, with sizes available from a stock range from and overall reliability will be limited to the weakest part of the pump. The flexible design
25mm up to 200mm. of these pump units combined with the appropriate selection of material of construction
The Yellowpump range provides total versatility when it comes to materials of selection, ensure the lowest operating costs.
A wide range of high quality Pumps and Pumpsets available from Yellowpumps
The Yellow ground sump pump elastomer covered.
Standard Slurrypump Designed for the
continuous pumping of
Benefits and options include:
• Yellow pumps are simple to
Ground Sump pump type SP-metal lined and SPR - • A simple bolt-on casing Pump Sets Replacement Spares
highly abrasive, high Rubber lined are manufactured in attachment to the base of the
maintain popular metric sizes, they provide column is manufactured from a
density slurries with
• Yellow pumps are simple to a simple yet rugged range of sump wear resistant alloy for the Each pump set is designed specifically to meet the requirements and individual needs of We are an alternative European supplier of high quality
minimal maintenance
strip and rebuild pumps specially devised for: Yellowpump type SP and from our customers on each and every project. We offer the unique benefits or providing replacement wear parts to suit your 'Warman' pump. We
requirements, the
• Yellow pumps require a moulded elastomer for the type individual designs for individual customers without the long lead times or teething can offer interchangeable wear parts at realistic and fair
Yellowpump horizontal • Abrasive and/or corrosive slurries
flooded section to WORK SPR. problems usually associated with one off solutions. If other manufacturer's standard prices to help you maintain your position as a competitive
centrifugal pumps • Large particle size
EFFICIENTLY, they are not • Double suction impellers (top and products will not fit or do not meet your requirements then speak to Yellowpumps and pump operator.
maintains high efficiencies • High slurry densities
self priming. bottom entry-interchangeable) we will design a purpose built variable speed pump set to meet your individual needs.
over the wear life of its • Continuous or “snore” operations
• Yellow pumps offer a Typical Applications: induce low axial bearing loads New replacement wear parts from stock to suit most
components. • Heavy duties demanding
number of impeller options. incorporating heavy deep vanes Technical advice and design assistance is available upon request; our team has over 100 common models of 'Warman' pumps. (Our parts are not
• Process Plant Transfers cantilevered shafts
All Yellowpumps offered • Removable cartridge type for maximum wear resistance years of working knowledge and process experience. supplied of manufactured by the OEM).
• Wet Waste Processes Typical Applications:
come with Timken bearings grease lubricated bearing Offering many features and and for handling large solids.
• Recycling - Washing • Ground Sump
fitted as standard. We offer assembly can be replaced • Drop-in metal mesh upper We offer a range of pumpsets that can be supplied in a range of formats: Reconditioned Warman Pumps
Plants Drainage/Washdown benefits:
a choice of either high with the pump base in-situ, strainer; snap-on elastomer or
• Sand Plant Duties • Floor Drainage • Bearings, shaft and housing are
chrome metal or durable facilitating easy polyurethane for type SP and • Stacked format. We offer refurbished/overhauled, service exchange
• Heavy Minerals • Mill Sumps generously proportioned.
rubber pump liners; we also maintenance. type SPR pumps with strainers • Side by side format. Warman slurry pumps from stock + 6 months warranty.
(Processing) • Carbon Transfer • Grease lubricated and sealed by
offer full spare sets backup • Optional centrifugal shaft fitting in column openings. • Direct coupled format. Also new low voltage ABB industrial electric motors from
• Mineral Recovery • Level Monitoring labyrinths; the upper bearing is
to support everything that seal eliminates the need for • Magnetite Mixing • Bolted metal or polyurethane stock with a full UK warranty.
Applications grease purged and the lower
we sell. gland sealing water. lower strainers for type SP and
• Chemical Process Plant bearing protected by a special
• Configurations of metal and moulded snap-on elastomer for Burrows pump sales buy & sell new and used or stock
Yellowpump rubber and Duties. flinger.
rubber lined pumps of the type SPR. surplus Warman pumps and associated spare parts and
metal lined pumps feature • The upper or drive end bearing is
same frame size use the equipment.
casings which are radially a parallel roller type whilst the
same base, bearing
split into two halves with lower bearing is a double taper
assembly, stuffing box and
minimum casing bolts roller with preset end float.
shaft sleeve, reducing
reducing maintenance and • Mild steel column assembly the
stockholding to a minimum.
minimise downtime. Yellowpump type SPR model is
Gravel pump High Head pump
The Yellowpump range of gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size The Yellowpump range of Type HH (High Head) pumps was designed specifically for continuous use in slurry type
distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile applications where a high head per stage is required. The range is capable of handling medium size particles and
of the casing reduces associated velocities further increasing component life. pumping at heads in excess of 90 metres per stage. The small eye to impeller diameter ratio provides a combination
that yields excellent wear performance. The pumps were also designed for higher pressure applications typically
associated with series pumping.
Typical Applications:
Design and Unique Features
• Cyclone Feed
• Suction Hopper Dredging
• Heavy duty encapsulated design, with an all metal design of
• Dredging
the wet-end components.
• The unique impeller eye to vane diameter ratio design allows Typical Applications:
• Barge Loading
the pump to develop significant amounts of head per stage.
• Mill Discharge • Tailings Pumping
• The wet-end fits onto the standard Yellowpump mechanical
• Sand Reclamation • Cyclone Feed
end without the need for any adaptor plates.
• Sugar Beet • Press Feed Pump
• Robust heavy duty bearing assemblies consisting of heavy
• High Pressure Water
duty taper rollers, minimum shaft overhang and large diameter Pump
rigid shafts, all contributing to trouble free operation.
Design and Unique Features • The Yellowpump type HH pumps are fitted to a size up bearing
• Stage Pumping Duties All our pumpsets utilize the following components sourced from leading manufacturers:
• Heavy Minerals
• The unique segmented clamp ring on larger size units and a solid ring on smaller pumps assembly to cater for the increased absorbed power • Shaft/Pit Dewatering
requirements from the higher head per stage duties.
facilitates casing rotation to any angle.
• A unique end cover assembly comprising V-Seals, double
ABB - High efficiency motors
• Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in piston rings and an external flinger with grease lubricated
the gland area. labyrinths is standard.
• Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. • Available in either a centrifugal or stuffing box sealing
Timken - high quality pump bearings Fenner - drive belts and pulleys
• Designed to reduce internal velocities the large, robust casing facilitates minimum efficiency loss and improved casing wear life. arrangement.
• Yellowpumps heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard.
• A standard unique end cover assembly comprising of V-seals, double piston rings and an external flinger with grease lubricated labyrinths. Klinger - pump packing Fuchs Lubricants - Renolit EP 2 extreme pressure grease
burrows 6 page 4/6/10 13:28 Page 2