Professional Documents
Culture Documents
1314.17.73
2. Hose clamp for rubber pipe is here,
accessible under the power unit walkway
3 Vent Hose connection
4 Retaining bolts
• Clean and inspect the pipe to see the leak
• If the leak is obvious and is a small hole,
repair it by welding
• If the leak is not obvious, fully weld around
the both sides of the flange plate
Welding comments
• The fuel pipe is thin-wall steel pipe.
• It can be welded with manual arc (MAW), MIG or
bronze welded with a gas flame (brazing).
• Care must be taken not to burn through the thin
steel pipe
• It is recommended that the diesel be well
cleaned from the pipe to reduce the fire risk
Fluid level