Professional Documents
Culture Documents
May 2015
Version 5
Agenda
• IP-20N Product Family
• IP-20G Overview
• IP-20N Overview
• 1U and 2U chassis
IP-10G IP-20G
Compact Compact
High End Edge Node All-Outdoor E-Band
Node Node
IP-20C
Two Directions
IP-20G
Two Carriers
4
IP-20G: Font panel
1RU
External Power
16 x E1s 1 or 2 RFU
Alarms 2 x FE -48V DC
(optional) 2 x GE interfaces
(DB9) Management (Single-feed &
Optical (TNC) Dual-feed options)
(RJ45) 2 x Dual-Mode: (SFP)
Sync in/out GE Electrical or
(RJ45) ‘Cascading’
Terminal (RJ45) 2 x GE
(RJ45) Electrical
(RJ45)
8
FibeAir IP-20N Product Overview
Purpose built for Nodal deployments
Unified architecture with common cards
• Traffic/Control cards (TCC)
• Radio interface cards (RMC)
o Non-XPIC
o XPIC
o 2048 QAM
1RU chassis, Up to 5 RFUs • Line cards (LIC)
o Eth – 4 x 1GE
o TDM – 16 x E1/DS1 LIC
– 1 x STM-1/OC3 LIC
- 1 x ch STM-1
o LIC-X-E4-Elec./Opt
• Radio interface cards (RMC)
o Non-XPIC
o XPIC
o 2048 QAM
2RU chassis, Up to 10 RFUs
Full redundancy option (No SPoF) Configuration: N+0/N+1 (N up to 10), 1+1/2+2, combination
of XPIC/non-XPIC, SD/non-SD
Ultra-high flexibility/modularity
Optimized foot-print, density, scalability & availability
11 12
7 8 9 10
3 4 5 6
1 2
3 4 5 6
1 2 51
11 12 50
7 8 9 10
3 4 5 6
1 2 51
11 Proprietary and Confidential
Recommendations
It is recommended to place the same type of cards in adjacent pairs, as follows:
• Slots 3 and 4
• Slots 5 and 6
• Slots 7 and 8 (2RU only)
• Slots 9 and 10 (2RU only)
The reason for this is that for certain features, connectivity is supported in the backplane
between these slot pairs
14
11
Traffic Control Card (TCC)
1
• Main functions:
• TCC-B and TCC-B2 – doesn’t support Multi-Carrier ABC
• TCC-B-MC – required for Multi-Carrier ABC configurations, HSB BBS SD support
• 1x Up to 8+0 MC-ABC (Up to 2.5 Gbps)
• 1+1/2+2 MC-ABC/HSB (Up to 1Gbps)
• Mixed Nx1+0/1+1 & 1x ABC (4+0)
• Network processor with 16 ports
• 10 Gbps switching capacity
• 6,25 Mpps (Mega packet per second) switching capacity
• Shelf control and management
• Ethernet traffic management and switching
• Clock unit
MNG port 1
MNG port 2
CPU
1Gb SGMII / (2.5Gb) Radio Card
Ethernet Switch
16 ports – 10Gbps
Activity
LED
SYNC Serial Gigabit
Port Port Electrical Ports
18
12
Radio Modem Cards (RMC-B) 7
3
8
4
9
5
10
6
2
RMC B
XPIC Yes
Multi-Carrier ABC Yes
Modem type Mars modem
Modulation 2048 QAM with Premium RFU + ACM
FD and SD Yes
IP20N communication with
Yes
IP20G across a link
IF Connector
Handle Handle
21
Ethernet Line Interface Card 12
Electrical LIC-XE4-Elec 2
• LIC-XE4-Elec
• Supports 4 GBE ports (one combo)
• Works only on slots 2 and 12
• MDI/MDIX support
• Cascading ports (port 3 & 4)
Handle Handle
Color ACT Left LED for port Right LED for port SFP LED
Interface is disabled
Cable not connected,
or the interface
off No power Interface is disabled link not ok, interface
operates at
is disabled
100BaseT mode
Interface operates at
the interface is Interface is enabled
1000BaseT mode,
enabled and link is and link is OK,
green OK, no alarms Blinking means
OK (Blinking = traffic blinking means traffic
operates at 10BaseT
activity) activity
mode
Card failure or
red --------------------------- --------------------------- ----------------------------
hardware failure
Optical LIC-XE4-Opt 2
• LIC-XE4-Opt
• Supports 4 GBE ports (firs port is combo)
• Total 4x SFP
• Works only on slots 2 and 12
• Cascading ports (port 3 & 4)
Handle Handle
Color ACT Left LED for port Right LED for port SFP LED
Interface is disabled
Cable not connected,
or the interface
off No power Interface is disabled link not ok, interface
operates at
is disabled
100BaseT mode
Interface operates at
the interface is Interface is enabled
1000BaseT mode,
enabled and link is and link is OK,
green OK, no alarms Blinking means
OK (Blinking = traffic blinking means traffic
operates at 10BaseT
activity) activity
mode
Card failure or
red --------------------------- --------------------------- ----------------------------
hardware failure
26
LIC-T16 (16xE1/DS1) 12
7 8 9 10
Line Interface Card 3 4 5
2
6
• TDM-LIC
• 16 E1/T1s
• 1588 client clock and boundary clock as a future option
Handle Handle
Card failure or
red --------------------------- --------------------------- Any alarms
hardware failure
• TDM-LIC
• 1 STM-1/OC3
• 1588 client clock and boundary clock as a future option
• The 1 x ch-STM-1 interface uses an optical SFP connector.
STM-1/OC3 SFP
Handle Handle
Color ACT Sync Left LED for Sync Right LED for STM1/OC3
port port
The interface is
The interface is The interface is
off No power disabled or no signal is
disabled disabled
being received
Indicates whether a valid Indicates whether the
green OK, no alarms signal is being received interface is configured to No alarms
when enabled export a clock
Card failure or
red --------------------------- --------------------------- Any alarms
hardware failure
32
Mandatory Cards - IVM
• Single card for 1RU and 2RU chassis.
• 2 x E2PROM on single board (function as 2 separated cards).
• Installed at the back of the chassis
• Holds the chassis:
• License.
• Node MAC address (48 MACs per unit).
• Serial number.
34
Mandatory Cards – PDC
Power Distribution Card
• Monitors the inputs signal
• Drives the -48V signal
• Converts the -48V signal to other power levels
• Different card for 1RU chassis and 2RU chassis
• 2U chassis uses two PDC card for redundancy
• 1U chassis uses dual input for redundancy
38
Mandatory Cards – Fans
• Four fans inside the fans module
• Powered up from -48VDC from the backplane
• Different module for 1RU and 2RU chassis