Professional Documents
Culture Documents
1
AGS-20: New IDU platform
AGS-20 is the new generation platform common to all SIAE products
It addresses the following applications:
Stand Alone L2/MPLS Aggregation Unit
Aggregation Unit for All Outdoor Radio including E-Band ALFOplus80 HD
Next Generation “indoor Unit” for split Mount Radio compatible
with existing ASN ODUs
G be
ALFOplus
2,5
PoE
1 or
Radio LAG
N* 1 Gbe
Lighting Protection N*
ALFOplus 2
be
r 2 ,5 G
N* 1 o
Common Networking
IF
Across all Microwave AGS 20 ASN
Platforms
2
Architecture
AGS-20 is a “pizza box” equipment compound of 3 main units in addition to power supply and FANs units:
1) Core Unit (common to all AGS-20 versions, it’s based on the new Broadcom SABER + LSI SPEAR platform)
2) Core Expansion Unit (at the time being Four different types are expected)
3) TDM Expansion Unit (at the time being Two different types are expected)
PWR unit
FANs unit
3
Core & TDM Expansion Units
CORE unit is common in all HW configurations TDM Exp unit is HW configuration dependent
Main functionalities available @ CORE Unit Main functionalities available @ TDM Expansion Unit
Ethernet Management based on Broadcom SABER chip The bulk of the E1/STM-1 functionalities resides in the
Equipment controller based on LSI SPEAR chip optional expansion card
Synchronization (Sync-E; 1588v2) TDM Cross connect matrix
4
Core Expansion Units (4 types)
CORE Exp unit is HW configuration dependent
Main functionalities available @ CORE Expansion Unit
Radio interface protection and L1 aggregation
Modem section based on Provigent chipset
IF connectivity compatible with BEP 2.0 Outdoor Units (AS-03, ASN, ASN monoboard, ASN SFF)
Ethernet connectivity compatible with SIAE Full-Outdoor (ALFOPlus80, ALFOPlus80 HD, ALFOplus, ALFOplus 2, etc .........)
1) External interface @ AnalogRadioInterface 1 (ARI-1) Expansion CORE Unit
1x IF (Compatible with current SIAE ODU)
2x Optical (1Gbps or 2.5Gbps optical @ SFP)
2) External interface @ AnalogRadioInterface 2 (ARI-2) Expansion CORE Unit
2x IF (Compatible with current SIAE ODU)
2x Optical (1Gbps or 2.5Gbps optical @ SFP)
3) External interface @ AnalogRadioInterface 4 (ARI-4) Expansion CORE Unit
4x IF (Compatible with current SIAE ODU)
4) External interface @ DigitalRadioInterface 4 (DRI-4) Expansion CORE Unit
2x COMBO (1Gbps electrical @ RJ-45 or 1Gbps optical @ SFP)
2x Optical (1Gbps or 2.5Gbps optical @ SFP)
5
Common DC/DC & FAN Units
DC/DC Unit
The DC/DC unit will provide the various secondary voltages from the primary 48V.
Up to two power sources can be present according to HW configuration.
The total power absorbed by the unit is about 80W with IDU AGS-20 Dual-IF w/ 16xE1 and about 70W with IDU AGS-20 Single-IF
w/ 16xE1.
Additional 25W can be absorbed by each ASN ODU unit.
There are 7 fans in the rear section of the equipment to contain the overall temperature. (see next slide)
6
HW configurations
AGS-20 HW Configurations Dedicated Radio interfaces TDM interfaces
Quad-ETH w/16E1+2STM1 2xETH (combo) + 2xETH (optical) 16xE1 + 2xSTM1 + 2xNodal Bus
7
Main HW configurations 1/2
A) Switch HW Configuration: No dedicated radio interfaces
8
Main HW configurations 2/2
A) Quad IF HW Configuration: 4xIF
9
Mechanic view in case of “single IF w/16E1” configuration
Specific CORE Expansion unit
(1xIF + 2xOptical) Common CORE unit FANs unit
10
Common interfaces
AGS-20 interfaces available at CORE unit are common to all HW configurations:
2x GE (1Gbps electrical Ports @ RJ-45 connector)
2x Optical (1Gbps or 2.5Gbps optical Ports @ SFP connector)
2x COMBO (1Gbps electrical @ RJ-45 or 1Gbps optical @ SFP)
1x Ethernet Local Access (@ RJ-45 connector)
1x Console (@ RJ-45 connector)
1x SYNK-E1 (@ RJ-45 connector)
1x ToD (@ RJ-45 connector)
1x PPS (@ 1.0/2.3 microSIEMENS connector)
Housekeeping alarm Interface (@ RJ-45 connector)
SD card expansion
11
Product Positioning
AGS-20 Platform
AGS-20 is positioned as a cost effective L2/MPLS Networking device conceived for Mobile Backhaul
It is strongly engineered as data centric platform with full native support of CLI language and scripting
The Hardware Platform has been conceived to support latest Carrier Ethernet protocols MPLS/VPLS, MPLS-TP, PBB, PBB-TE, QiQ
AGS20 adopts a field proven, Carrier Grade Protocol Stack widely use by major Ethernet/MPLS equipment supplier
12
Application Example (“switch” HW configuration) 1/4
ALFOPlus80 HD
2,5 Gbs full-duplex
ALFOplus
38 GHz – 500 Mbs ETH cable
2,5Gbs
ETH cable
Station Alarms
ALFOplus
38 GHz – 500 Mbs
ETH cable ETH cable Network reference area
1Gbs UNII
Local
Base Station
13
Application Example (“Single IF” HW configuration) 2/4
ALFOPlus80 HD
Station Alarms
Local
Base Station
14
Application Example (“Dual IF” HW configuration) 3/4
ALFOPlus80 HD
Station Alarms
Former BEP 2.0
38 GHz – 500 Mbs IF cable
ETH cable Network reference area
1Gbs UNII
Local
Base Station
15
Application Example (“Quad IF” HW configuration) 4/4
Former BEP 2.0
38 GHz – 500 Mbs
ALFOPlus80 HD
Former BEP 2.0
Up to 2,5 Gbs full-duplex
38 GHz – 500 Mbs
Former BEP 2.0
IF cables
38 GHz – 500 Mbs
2,5Gbs
Former BEP 2.0
38 GHz – 500 Mbs ETH cable
Station Alarms
Physycal Layer Aggregation Group ETH cable Network reference area
1Gbs UNII
Local
Base Station
16
BACKUP
17
Architecture with ARI 1 Core Expansion unit
18
Architecture with ARI 2 Core Expansion unit
19
Architecture with DRI 4 Core Expansion unit
20
Mechanical View
Specific Expansion CORE sub-unit
(1xIF + 2xOptical) ARI-1
Common CORE sub-unit FANs sub-unit
21
AGS-20: Panel Frontal View – Sub-unit position
Power
TDM espansion Supply
ODU-A ODU-B LAN-C LAN-D LAN 2 LAN 2 LAN 4 LAN 6
22
AGS-20 Panel Frontal View – Connector position
23
Ethernet External Interfaces Summary
Unit Interface type Speed PHY type PoE
GE 1 Gbps electrical @ RJ-45 connector N.A.
1 Gbps electrical @ RJ-45 connector N.A.
COMBO
Core Unit 1 Gbps optical @ SFP connector N.A.
1 Gbps optical @ SFP connector N.A.
Optical
2.5 Gbps optical @ SFP connector N.A.
1 Gbps optical @ SFP connector N.A.
Optical
2.5 Gbps optical @ SFP connector N.A.
Core Expansion Unit
1 Gbps electrical @ RJ-45 connector Available
COMBO
1 Gbps optical @ SFP connector N.A.
24
LAN Interfaces Behavior @ Core Unit
Unit Interface Type DCN UNI NNI FO FO+
LAN 1 1 Gbps electrical No Yes Yes Yes (*) No
(COMBO) 1 Gbps optical No Yes Yes Yes (*) No
LAN 2 1 Gbps electrical No Yes Yes Yes (*) No
(COMBO) 1 Gbps optical No Yes Yes Yes (*) No
Core
Unit LAN 3 (GE) 1 Gbps electrical Yes Yes Yes No No
LAN 4 (GE) 1 Gbps electrical Yes Yes Yes No No
LAN 5 (Optical) 1 / 2.5 Gbps optical No Yes Yes Yes (*) No
LAN 6 (Optical) 1 / 2.5 Gbps optical No Yes Yes Yes (*) No
(*) with data plane limitation with respect to CORE-EXP unit ports
25
LAN Interfaces Behavior @ Expansion Core Unit
Unit Unit Interface Type UNI NNI FO FO+
Type
Analog Radio LAN C (Optical) 1Gbps/2.5 Gbps optical Yes Yes Yes Yes
Interface 1 LAN D (Optical) 1Gbps/2.5 Gbps optical Yes Yes Yes Yes
Analog Radio LAN C (Optical) 1Gbps/2.5 Gbps optical Yes Yes Yes Yes
Core Interface 2 LAN D (Optical) 1Gbps/2.5 Gbps optical Yes Yes Yes Yes
Expansion
Unit LAN A (COMBO) 1Gbps COMBO Yes Yes Yes Yes
Digital Radio LAN B (COMBO) 1Gbps COMBO Yes Yes Yes Yes
Interface 1 LAN C (Optical) 1Gbps/2.5 Gbps optical Yes Yes Yes Yes
LAN D (Optical) 1Gbps/2.5 Gbps optical Yes Yes Yes Yes
26
SIAE IF Interfaces Summary
Unit Unit Type IF Support Behavior
Core Unit No //
DigitalRadioInterface 1 No //
27