Professional Documents
Culture Documents
ALPINE PO Box 681, State College, PA 16804 USA. • Phone 814.466.7134 • Fax 814.466.3193 • info@alpine-aec.com • www.alpinecutters.com
APPLICATIONS:
UNDERWATER CUTTING
TUNNELING
KEY FEATURES:
PATENTED GEAR REDUCTION FOR THE MOST
CUTTING FORCE IN THE INDUSTRY!
TRENCHING
Powered by Carrier Auxiliary Hydraulics
Robust Low-Speed / High-Torque Hydraulic Motor Compared to hydraulic hammers rotary cutters have:
DEMOLITION
Choice of Hydraulic Motors to Match Carrier Narrower trench with smaller footprint
Heavy Duty Spur Gear Design STUMP GRINDING Requires less fill
Smooth safe walls
Large Output Shaft Bearings to Resist High Loads
Lower vibrations and shock waves
Long-Life Face-type Seals Lower noise for operation in sensitive areas
Cut material is suitable for backfill and bedding
Suitable for Underwater Operations
Higher rate of production for most material
Variable Drum Speed for Max Production in all Material 50% less backfill required
Significant concrete savings
Selection of Drums and Picks for All Applications
Custom Solutions for Unusual Applications
ALPINE PO Box 681, State College, PA 16804 USA. • Phone 814.466.7134 • Fax 814.466.3193 • info@alpine-aec.com • www.alpinecutters.com
TECHNICAL INFORMATION: RANGE OF CUTTING UNITS
Hydr. Input Power hp (kW) 24-30* (18-22) 40 (30) 60 (45) 80 (60) 121 (90) 161 (120) 190 (140)
Peak Power hp (kW) 29-36 (22-27) 50 (40) 75 (55) 95 (70) 145 (110) 175 (130) 200 (150)
Hydr. Flow GPM 11 – 17 16 - 32 32 – 50 37-56 63 – 90 87 – 132 95 – 158
Required (l/min) (40 – 65) (60 – 120) (120 – 190) (140 – 210) (240 – 340) (330 – 500) (360 – 600)
Max. Operating psi (bar) 5439 (375) 5439 (375) 5075 (350) 5075 (350) 5075 (350) 5075 (350) 5075 (350)
Pressure
Cutting Head in (mm) 12.7 (322) 15.3 (388) 21.17 (550) 24.2 (615) 24.2 (615) 29.6 (760) 29.6 (760)
Diameter
Cutting Head Width in (mm) 22 (557) 26.7 (678) 29.5 (750) 35.4 (900) 35.4 (900) 47.2 (1200) 55.1 (1400)
Output Shaft Torque ft lb (Nm) 3271 (4400) 4050 (5500) 7364 (10000) 10065 (13600) 18000 (24100) 26710 (36200) 32111 (43500)
At 5075 psi (350 bar)
Cutting Force lb (kN) 6193* (27.5) 6363 (28.3) 8162 (36.3) 9976 (44.4) 17548 (78.5) 21424 (95.3) 25757 (114.6)
At 5075 psi (350 bar)
ft/s 4–9 6–9 6 – 11 6 – 10 6–8 6 – 10 6 – 10
Pick Speed (m/s) (1.1 - 2.3) (1.8 - 2.8) (1.9 - 3.2) (1.8 - 3.0) (1.8 - 2.5) (1.8 -3.0) (1.8 -3.0)
Weight lbs (kg) 441 (200) 827 (375) 1797 (815) 2975 (1350) 3196 (1450) 5280 (2400) 5700 (2600)
ton 2–9 5 – 22 13 – 22 20 – 33 28 – 39 33 – 55 + 44 +
Excavator Weight (met. ton) (2 – 8) (8 – 15) (12 – 20) (18 – 30) (25 – 35) (30 – 45 +) (40 +)
* Available with optional XHD power boost motor
ALPINE PO Box 681, State College, PA 16804 USA. • Phone 814.466.7134 • Fax 814.466.3193 • info@alpine-aec.com • www.alpinecutters.com
TECHNICAL INFORMATION: CUTTING DRUM OPTIONS
EXCAVATION DRUM DEMOLITION DRUM SCALING DRUM ROCK-CONCRETE SAW CLAY SPADE DRUM
For soft to medium strength rock. For hard rock and concrete with Used whenever a precise or Detachable saw disc for precise For clay and very soft ground.
Fewer picks for maximum a raised helix to limit pick smooth surface is required. Not saw cutting in concrete, asphalt,
penetration. penetration and reduce intended for bulk production. or rock. For all models.
vibrations.
Contact Alpine for application consulting on your next project. Custom solutions are our specialty.
Our sales engineers can assist in equipment selection and estimating cutting performance.
ALPINE PO Box 681, State College, PA 16804 USA. • Phone 814.466.7134 • Fax 814.466.3193 • info@alpine-aec.com • www.alpinecutters.com