Professional Documents
Culture Documents
b) Write the winged edge data structure for a model created in B-rep environment. The model is a
pentagon base pyramid of base edge size 40 mm and height 60 mm
02 Identify and list differnt features (sketched features, dress up features, composite features) that may
appear in the model tree for competing the model in the figures 1 and 2
Figure 1 Figure 2
03 a) Illustrate with the practical application for 1D element, 2D element and 3D element structural and
thermal finite element analysis. (Problem statement, type of element, degree of freedom, type of
analysis, end results and software environment used).
b) For the bar assemblage shown in figure, using direct stiffness method derive the element stiffness
matrix, global stiffness matrix and determine the nodal displacements, stresses in each element and
reactions. Indicate the steps as per general FEM procedure. (Data: E = 190GPa, Cross sectional Area of
element 1 = 4 x 10-4 m2 Cross sectional Area of element 2 = 2 x 10-4 m2, spring stiffness =
4000kN/m)