Professional Documents
Culture Documents
6 ifVacuum
moisture
Update &condensation
clean
the Temperature
Virus the
Guard exterior
sensor of leakage
& interior
water the panels
and
2
4
5 is free ofcorrect
moisture condensation & water
if necessary.
7 Check
leakage
3
if
and correct
Check the ifpanel
Remote exterior isTool
necessary
Management free of corrosion,
Clear damage
Clear any etc…Paint
build up rust
of spots
sands, if necessary
debris etc in the
6 5 any build up of sands, debris etc in
Check if the panel interior is free of moisture
RS 485 for
the 8Temperature port.
Hardware Errors
sensor
condensation
Check the RS485 & water leakage
port for thethe andofcorrect if
sign
4
Check
6 the electrical connections of
7 necessary RIU Maldives
overheating.
Temperature
9 Check sensor
Server(Check voltage)
Utilization
Checkisloose
Chiller
Check wiring Plant
free and
of untidy wiring.
Control
damage, Algorithm
wear,
8 7 Vacuum & clean the interior of the panels
deterioration and corrosion
5 Review User Accounts
10
Check Makeand
sure the connections
wiring in of the panels are
9 8 loose
Vacuum
untidy
& clean the controllers
tight
Temperature
6 Change sensor
11 Server password
Check all bolts
9 Clear
Checkany and connecting
the build
tightness devices
up ofofsands,
the field
debristerminations
etc in the
7 sign of deterioration, corrosion
10 for the panel
12 Change User Accounts Passwords
or overheating
Check Voltage out from RS 485 port ( 1VDC<6
9 Check the DDC Controlers for the sign of
8 Make
VDC )
sure the electrical connections of the
overheating
Record 13
corrective maintenance activities here
panels are tight
Check wiring
9 Check Modbusisconfiguration
free of damage, wear,
settings
NO
9 deterioration and corrosion Go to
Check whether the exhaust fan is working
in14
AUTO mode
10 properly
Check CT ratio is correct
Check loose and untidy wiring
10
15 Clean the exhaust fan blades of the panel
Record corrective
Make maintenance
sure the electrical activities
connections here
of the
11
16 panels
Lightly are tight the lock, hinges & screws
lubricate
Check if the mounting hardware
NOis free of Customer
17 Check
12 wear,
whether the panel exhaust fan is
Go to
Check plantdamage
ifworking & corrosion
properly
Name: Check if the panel door is operate A: START PLANT
18 properly(Open, Close & Lock)
13 Clean the exhaust fan blades of the panel
Signature:
YES Check the service panel & service conduits are
Date: 19
14 Lightly
free of lubricate
corrosion the
and lock, hinges & screws
damage
15 Check if the UPS is online
S Go to
Running < 1
NO
Go to
C: START/STOP
=0
>0
Go to
Go to
E: START NEW CHILLER
Select Chiller to Start Next, which is Lowest Run hours and Not in
Maintenance Mode
Wait 1 Minute
Open
Start CT that is Selected to Start Next
Wait 20 Seconds
Start CT that is Selected to Start Next
Run
Wait 20 Seconds
Start CT that is Selected to Start Next
Run
No Flow
Check CDWP Flow Stop CDWP Pump
Flow
Run
No Flow
Check CHW Flow Status Stop CHWP
Flow
Run
Wait 15 Minute
Start CT that is Selected to Start Next
Minute
Go to
C. START/STOP CHILLER
F: STOP RUNNING CHILLER
Wait 1 Minute
Running
Check Chiller Status
Stop
Stop CHWP that is Selected to Start Next
Wait 20 Seconds
Start CT that is Selected to Start Next
Minute Running
Check CHWP Status
Stooped
Wait 20 Seconds
Minute Running
Check CDWP Status
Stop
Check CDWP Status
ed
Stop CT that Selected to Stop Next
Wait 20 Seconds
Start CT that is Selected to Start Next
Minute Running
Check CT Status
Stop
Check CDWP Status
ed
Close MV of the Chiller that Selected to Stop Next
Wait 1 Minute
Start CT that is Selected to Start Next
Minute Open
Check MV Status
Close
Wait 15 Minute
Start CT that is Selected to Start Next
Minute
Go to
C. START/STOP CHILLER
C.START/STOP CHILLERS
YES Go to
C.START/STOP
2<E>7
CHILLERS
2>E
E> 7
NO Go to
Chiller Load > 95 C.START/STOP
CHILLERS
Go to
E.Start New Chiller
Go to
E.Stop Running
Chiller
B. Maintenance Mode(MM)
NO
CHILLER to Start Next
=
CHILLER in MM
YES
Stop
Stop
Stop CDWP, Based on Chiller in MM
Stop
Check CDWP Status
ed
Stop CT, Based on Chiller in MM
Check CT Status
Running
Stop
Check CDWP Status
ed
Close MV of the Chiller, Based on Chiller in MM
Check MV Status
Open
Close
Go to
A. START Plant
bypass valve operation?