Professional Documents
Culture Documents
gravel
Ensuring quality directly at the point of origin - directly at the construction site!
• Introducing German - engineered technology, for fast, accurate and reliable moisture
measurements in sand, gravel & grit
• The handy two-rod probe with the solid rods can be inserted easily into the measured material.
• Both durable and waterproof construction ensures safe handling even under difficult environmental conditions.
• Designed for concrete batch plants, quarries & construction
• Save time & money. Test large volumes and stockpiles in seconds, no need for microwaves, balances or incorrect values.
• Easily calibrated to your specific materials for accurate results every time. Simply calibrate yourself to have CMT
equipment do it for you. First 3 material calibration are free of charge.
The quick verification of the moisture content of delivered sand or With the novel SONO sensors, IMKO is presenting a new generation
gravel or checking the moisture content of your material in regard to of moisture sensors. They were especially designed to meet the
suitability for further processing – this used to be connected with the demands of the construction and bulk industry. Their secret: The
laborious kiln-drying method or the intricate CM test. Fortunately, application of the most modern TRIME® radar technology (Time-
these are no longer necessary. With the mobile moisture measure- Domain-Reflectometry). Via an electromagnetic TDR-impulse with
ment system HD2, the enterprise IMKO is presenting a handy and a frequency of 1 GHz SONO-probes measure the water content
robust system for the quick determination of the moisture content in precisely up to ranges where the material has become saturated,
sand and gravel, as well as other aggregates.
and they continue to measure beyond this stage. In addition,
valuable diagnostics can be made regarding the mineral content or
To conduct the measurement, the probe rods are simply inserted
the consistency of the measured material.
into the material and the measurement is performed with the mere
actuation of the start button. Within two seconds, the moisture The figure shows the effective measurement volume detected by the
measurement value is presented on the clear display. In contrary probe rods (green wave lines).
to the kiln-drying method where the measurement is usually
restricted to a measured quantity of 3kg, and the CM test which „No other manufacturer of mobile sand moisture devices
only measures approximately 30g, the HD2 is able to provide the could convince us so far. But the HD2 from IMKO has exceeded
user with a moisture content value of a measured quantity of 9kg our expectations. After many days of comparative measurements
with only one measurement. In the operation mode „Average Value“, in the laboratory, we can confirm the highest accuracy for
merely 6 measurements are sufficient to provide a fast and accurate the HD2 mobile moisture meter using the SONO-M1 probe.
measurement of a material quantity of 9kg within a few seconds.
This is what we call representative,
Michael Ackermann, RAGANO Betonfertigteile
progressive and cost-saving.
More material measured in shorter time Simple and structured: The measurement procedure with the HD2 “
The innovative The material selection The measurement
hand-held instru-
ment HD2
® Simple and robust
Here you see the
in a clear format, Depending on the applica-
The single values selected calibration.
keyboard layout and tion there are up to 15 material
Kiln-drying CM-test TRIME -TDR operation.
of the measurements.
specific calibrations selectable
with HD2 in the probe. Charge of the battery
Measured material: Measured material: Measured material:
Setup: Material Calibr. 6
4,36% Cal.1
No. Name: 4,47%
3 kg 30 g 9 kg 04 Sand 0..4mm 4,47% _
Ø Moist:
By push of a button the 4,35%
05 Gravel 2..8mm measurement starts
06 Gravel 8..16mm 4,46% 4,43%
07 Gravel 16..32mm 4,47%
min min min
30 30 2
Here you can see the calibra- The HD2 automatically
tions by name. Own calibrations forms a stable average of the
can be created and stored. number of the single measu-
rements.
Width: 64mm Probe body: waterproof sealed PVC (IP68) Probe body: waterproof sealed PVC (IP68)
Fast and easy moisture measure- Check your goods directly on All packed in a rugged carrying
ment of sand gravel and grit: delivery: case:
IMKO GmbH Im Stöck 2 Germany-76275 Ettlingen Phone +49-(0)72 43-59 210 Fax +49-(0)72 43-9 08 56 e-mail INFO@IMKO.de www.IMKO.de
For More Information
Email: info@cmtequipment.com.au
Web: www.cmtequipment.com.au
Head Office: 07 55 242 230 Head Office / Warehouse Address: 6 Industry Drive
Fax: 07 55 247 272 Tweed Heads South NSW 2486
WA Office: 08 92 486 244 WA Office: Unit 9, 145 Beringarra Ave
Fax: 08 92 487 693 Malaga WA 6090