Professional Documents
Culture Documents
3 - Dowel sleeve
2x
6 - Bracket
For electrical wiring harness
7 - Bolts
Tightening torque and sequence → Fig.
8 - Bracket
For electrical connectors for Lambda probes (left-side)
10 - O-ring
Renew
12 - O-ring
Renew
13 - Bolt
Tightening torque and sequence → Fig.
14 - Bracket
For electrical connectors for Lambda probes (right-side)
15 - O-rings
Renew
19 - Dowel sleeve
2x
21 - Bolt
Tightening torque → Rep. gr.28
Timing chain cover (left-side) - tightening torque and tightening sequence
– Tighten bolts for timing chain cover (left-side) in the sequence -1 ... 8- to 9 Nm.
Note
The brackets -arrows A and B- are secured together with the timing chain cover (left-side).
Timing chain cover (right-side) - tightening torque and tightening sequence
– Tighten bolts for timing chain cover (right-side) in the sequence -1 ... 8- to 9 Nm.
Note
The bracket -arrow- is secured together with the timing chain cover (right-side).
Timing chain cover (bottom) - tightening torque and tightening sequence
Note
Renew the bolts tightened with specified tightening angle.