Professional Documents
Culture Documents
DESCRIPTION
PRODUCT CHARACTERISTICS
CLEAN-UP™ is an industrial strength, specially formulated
blend of non-flammable solvents. Not for use in California. Spray Pattern–Typical Tight Stream
See SDS for additional OTC/LADCO state restrictions. In Propellant Carbon Dioxide
California and other CARB states use CLEAN UP II. Solvent Type Chlorinated
Specific Gravity 1.5
Density (lb/gal) 12.2
CLEAN-UP™ should be used to dissolve grease, oil, wax,
paint, grime, dirt, and dust. Flash Point None
Dielectric Strength
CLEAN-UP™ does not contain acids or alkalis and will not (ASTM D-877) >53 KV
damage metal surfaces. Do not use on surfaces affected by Flame Extension No Flame
petroleum solvents such as rubber, paint, some plastics, and NFPA 30B Storage Class Level 1
synthetic fabrics. Not to be used on sensitive electronic VOC Content Exempt
equipment.
930 Whitmore Drive • Rockwall, Texas 75087 • USA • (972) 771-1000 • 800-699-6318 • www.jetlube.com • An ISO 9001 registered company
Revised 6/18