Professional Documents
Culture Documents
Soal Mtcna Terbaru PDF
Soal Mtcna Terbaru PDF
1. What will happen if "Default forward" is disabled in wireless menu on a RouterOS AP?
A. Only clients with matching access control list rule will be able to connect to the AP
B. AP will not be able to connect to the clients
C. Clients will not be able to connect to each other
D. Clients will not be able to connect to the AP
3. You have to connect to a RouterBOARD without any previous configuration. Select all
possibilities to connect and do some basic configuration
A. Attach monitor/keyboard
B. MAC-Winbox
C. Telnet
D. Serial Connection
5. What is the meaning of the status letter "R" on a PPPoE client interface in RouterOS
Interfaces menu?
A. Remote
B. Radius
C. Running
D. Reconnecting
7. You can control bandwidth of a client connected to AP with the resource / interface
wireless access-list ( assume the client uses MikroTik RouterOS).
True
10. In which order are the entries in Access List and Connect List processed?
A. By interface name
B. In sequence order
C. In a random order
D. By Signal Strength Range
11. Simple Queue number 0 defines 2M for upload and download for target IP 10.10.0.33.
Simple Queue number 1 defines 4M for upload and download for target IP 10.10.0.33.
The maximum bandwidth that the client 10.10.0.33 is be able to obtain is:
A. 2M upload/download
B. 6M upload/download
C. 4M upload/download
D. OM upload/download
12. During a scan, in order to see all the available wireless frequencies that are supported
by the card the following option must be selected in the wireless card's "Frequency
Mode":
A. manual txpower
B. regulatory domain
C. superchannel
13. Consider the following diagram. We want to communicate from a device on LAN1 to
a device on LAN2. Assuming that all necessary configurations are already included on
R2, which of the following configurations in R1 would enable this communication?
A. lip route add dst-address=0.0.0.0/0 gateway=Etherl
B. lip route add dst-address=192.168.0.0/24 gateway=192.168.0.1
C. Tip route add dst-address=192.168.1.0/24 gateway=192.168.99.2
D. lip route add dst-address=0.0.0.0/0 gateway=192.168.99.2
E. lip route add dst-address=192.168.1.0/24 src-address=192.168.0.0/24
gateway=192.168.99.2
15. PPPoE server only works within one Ethernet broadcast domain that it is connected to.
If there is a router between server and end-user host, it will not be able to create PPPoE
tunnel to that PPPoE server.
true
16. MikroTik RouterOS commands can be run once a day by:
A. /system scheduler
B. /system watchdog
C. /system cron
18. When using routing option 'check-gateway=ping' what is the ICMP echo request
interval (in seconds)?
A. 105
B. 60s
C. 30s
D. 20s
20. Select statements that are true regarding the following command:
lip route add dst-address=172.16.4.0/24 gateway=192.168.4.2
A. The subnet mask for the destination network is 255.255.255.0
B. The command is used to configure the default route
C. The default administrative distance of 100 is used
D. The command is used to establish a static route
22. Which firewall chain should you use to filter ICMP packets from the router itself?
A. forward
B. postrouting
C. output
D. input
23. What is the correct action for a NAT rule on a router that should intercept SMTP
traffic and send it over to a specified mail server?
A. passthrough
B. redirect
C. dst-nat
D. tarpit
25. For static routing functionality, additionally to the RouterOS 'system' package, you
will also need the following software package:
A. dhcp
B. routing
C. advanced-tools
D. no extra package required